mmunication to the UPS has been lost. Steps
to reestablish communication are in progress.
upsDiagnosticsPassed
.1.3.6.1.4.1.17420.0.10
INFORMATION: The UPS passed its internal self-test.
returnFromLowBattery
.1.3.6.1.4.1.17420.0.11
N: The UPS has returned from a low battery
condition.
upsTurnedOff
.1.3.6.1.4.1.17420.0.12
he UPS has been turned 'off' by the
management station.
upsSleeping
.1.3.6.1.4.1.17420.0.13
he UPS is entering 'sleep' mode. Power
to the load will be cut off.
upsWokeUp
.1.3.6.1.4.1.17420.0.14
N: The UPS woke up from 'sleep' mode. Power
to the load has been restored.
upsRebootStarted
.1.3.6.1.4.1.17420.0.15
he UPS has started its reboot sequence. After
the specified delay the UPS will perform a reboot.
envOverTemperature
.1.3.6.1.4.1.17420.0.16
WARNING: The environment temperature exceed the normal value.
envTemperatureNormal
.1.3.6.1.4.1.17420.0.17
INFORMATION: The environment temperature is normal.
envOverHumidity
.1.3.6.1.4.1.17420.0.18
WARNING: The environment humidity exceed the normal value.
envHumidityNormal
.1.3.6.1.4.1.17420.0.19
INFORMATION: The environment humidity is normal.
upsOverLoad
.1.3.6.1.4.1.17420.0.2
e UPS has sensed a load greater than 100 percent
of its rated capacity.
envSmokeAbnormal
.1.3.6.1.4.1.17420.0.20
WARNING: Smoke is abnormal.
envWaterAbnormal
.1.3.6.1.4.1.17420.0.21
WARNING: Water is abnormal.
envSecurityAbnormal
.1.3.6.1.4.1.17420.0.22
WARNING: Security is abnormal.
envWaterNormal
.1.3.6.1.4.1.17420.0.24
INFORMATION: Water is normal.
envGasAbnormal
.1.3.6.1.4.1.17420.0.26
WARNING: Gas Alarm
upsTemp
.1.3.6.1.4.1.17420.0.27
WARNING: UPS Temperature Overrun
upsLoadNormal
.1.3.6.1.4.1.17420.0.28
WARNING: UPS Load Normal
upsTempNormal
.1.3.6.1.4.1.17420.0.29
WARNING: UPS temperature Normal
upsDiagnosticsFailed
.1.3.6.1.4.1.17420.0.3
SEVERE: The UPS failed its internal diagnostic self-test.
envUnderTemperature
.1.3.6.1.4.1.17420.0.30
WARNING: The environment temperature below the normal value.
envUnderHumidity
.1.3.6.1.4.1.17420.0.31
WARNING: The environment humidity below the normal value.
upsBypass
.1.3.6.1.4.1.17420.0.32
WARNING: The UPS is entering 'bypass' mode.
envSecurity1
.1.3.6.1.4.1.17420.0.33
WARNING: Security1 Alarm.
envSecurity2
.1.3.6.1.4.1.17420.0.34
WARNING: Security2 Alarm.
envSecurity3
.1.3.6.1.4.1.17420.0.35
WARNING: Security3 Alarm.
envSecurity4
.1.3.6.1.4.1.17420.0.36
WARNING: Security4 Alarm.
envSecurity5
.1.3.6.1.4.1.17420.0.37
WARNING: Security5 Alarm.
envSecurity6
.1.3.6.1.4.1.17420.0.38
WARNING: Security6 Alarm.
envSecurity7
.1.3.6.1.4.1.17420.0.39
WARNING: Security7 Alarm.
upsDischarged
.1.3.6.1.4.1.17420.0.4
e UPS just started a runtime calibration
discharge. The UPS batteries are being discharged.
upsRecroterror
.1.3.6.1.4.1.17420.0.47
WARNING: Rectifier Rotation Error
upsBypassFreFail
.1.3.6.1.4.1.17420.0.48
WARNING: Bypass Frequency Fail
upsBypassacnormal
.1.3.6.1.4.1.17420.0.49
WARNING: Bypass AC Normal
upsOnBattery
.1.3.6.1.4.1.17420.0.5
WARNING: The UPS has switched to battery backup power.
upsBypassacabnormal
.1.3.6.1.4.1.17420.0.50
WARNING: Bypass AC Abnormal
upsTest
.1.3.6.1.4.1.17420.0.51
WARNING: UPS Test
upsScheduleShutdown
.1.3.6.1.4.1.17420.0.52
WARNING: UPS Schedule Shutdown
upsBypassReturn
.1.3.6.1.4.1.17420.0.53
The UPS return from Bypass Mode
boostOn
.1.3.6.1.4.1.17420.0.6
WARNING: The UPS has enabled Boost.
lowBattery
.1.3.6.1.4.1.17420.0.7
e UPS batteries are low and will soon be exhausted.
If utility power is not restored the UPS will put itself
to 'sleep' and immediately cut power to the load.
communicationEstablished
.1.3.6.1.4.1.17420.0.8
N: Communication with the UPS has been
established.