CTRON-TRANSLATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
59

ctTransRifDbTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransRifDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransRifDbTable' 
A table containing entries of RIF Database.
ctTransRifDbEntry row .1.3.6.1.4.1.52.4.1.3.4.4.1.1
This entry for ctTransRifDbTable.
Indexes
Column Syntax OID
ctTransRifDbMacAddrmandatory
The Mac address of a source station in Cabletron cannonical
format.
.1.3.6.1.4.1.52.4.1.3.4.4.1.1.1
ctTransRifDbSrcPortmandatory
The index of the MIB-II interface that hardware address is learned
from.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.4.1.1.2
ctTransRifDbLengthmandatory
This object returns the number of bytes of routing information
associated with this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.4.1.1.3
ctTransRifDbRIFmandatory
This returns the routing information associated with an entry.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.52.4.1.3.4.4.1.1.4

ctTransRifDbCtrlTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransRifDbCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransRifDbCtrlTable' 
A table containing entries of objects to control RIF database.
ctTransRifDbCtrlEntry row .1.3.6.1.4.1.52.4.1.3.4.4.2.1
This entry for ctTransRifDbCtrlTable.
Indexes
Column Syntax OID
ctTransRifDbCtrlPortmandatory
The MIB-II interface number of the port for which this entry
is administering control over the RIF cache.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.4.2.1.1
ctTransRifDbWeightStatemandatory
Indicates the type of RIF to be retained in the RIF database.
shortestPath (2) is the RIF with the least number of hops. The
existing RIF will be replaced if the new RIF
is shorter.
q…
Enumerationr/w
Enumerated Values:
1notsupported
2shortestpath
3quickestpath
4largestmtu
5lastseen
 .1.3.6.1.4.1.52.4.1.3.4.4.2.1.2
ctTransRifDbCtrlTypemandatory
Type of RIF to cache. When the explorer option (1) is selected
the existing RIF may be replaced only if the received frame is
an explorer. When the 'all' option (2) is selected the existing
RIF may be replaced for an…
Enumerationr/w
Enumerated Values:
1explorer
2all
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.4.2.1.3
ctTransRifDbAgingTimermandatory
The timeout period in seconds for aging out dynamically
learned RI Fs.

The default for this object is product specific.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.4.2.1.4

ctTransBcastXTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransBcastXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransBcastXTable' 
A list describing the state of the broadcast conversion for each
interface on this device. The user will specify two broadcast
addresses (per interface), one for the media specific interface 
one for the cannonical format, that the translation state machine
will provide conversion between. This conversion only acts upon the
DA of the MAC header when the specified address matches the DA.
ctTransBcastXEntry row .1.3.6.1.4.1.52.4.1.3.4.5.1.1
A list of objects pertaining to the state of broadcast
conversion for each interface.
Indexes
Column Syntax OID
ctTransBcastXPortmandatory
The MIB-II interface number of the port for which this entry
is administering broadcast conversion translation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.5.1.1.1
ctTransBcastXModemandatory
This object indicates whether the ctTransBcastXMedia and
ctTransBcastXCanonical objects pair are valid for this
interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.5.1.1.2
ctTransBcastXMediamandatory
This object is the media specific broadcast address that this
interface will allow translation to/from. This conversion only
acts upon the DA of the MAC header when the specified address
matches the DA.
r/w .1.3.6.1.4.1.52.4.1.3.4.5.1.1.3
ctTransBcastXCanonicalmandatory
This object is the cannonical broadcast address that this
interface will allow translation to/from. This conversion only
acts upon the DA of the MAC header when the specified address
matches the DA.
r/w .1.3.6.1.4.1.52.4.1.3.4.5.1.1.4

ctTransIbmLlcTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.6.1 · 1 row entry · 9 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransIbmLlcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransIbmLlcTable' 
A list describing the state of the
IBM LLC translation for each interface on this device.
ctTransIbmLlcEntry row .1.3.6.1.4.1.52.4.1.3.4.6.1.1
A list of objects pertaining to the state of IBM LLC
translation for each interface.
Indexes
Column Syntax OID
ctTransIbmLlcPortmandatory
The MIB-II interface number of the port for which this entry
is administering IBM LLC translation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.1
ctTransIbmLlcNullModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC
based protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.2
ctTransIbmLlcSnaPathModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.3
ctTransIbmLlcSnaModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.4
ctTransIbmLlcNbModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.5
ctTransIbmLlcLnmModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.6
ctTransIbmLlcDscModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.7
ctTransIbmLlcOtherModemandatory
IBM networks systems have a special translation called 'IBM
LLC Encapsulation' which is used for translating IBM LLC based
protocols between Token Ring and Ethernet Version 2.0 (DIXE)
format. This translation does not…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.8
ctTransIbmLlcOtherValuemandatory
This object allows the user to select an IBM LLC LSAP value not
specified above.

When ctTransIbmLlcOtherMode is enabled all frames outbound on this
token ring port and providing a match between this va…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4.1.3.4.6.1.1.9

ctTransSrTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.7.1 · 1 row entry · 11 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransSrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransSrTable' 
A table of entries describing the source route
configuration managed objects.
ctTransSrEntry row .1.3.6.1.4.1.52.4.1.3.4.7.1.1
A list of objects to allow the configuration of source
route translation information.
Indexes
Column Syntax OID
ctTransSrPortmandatory
The MIB-II interface number for which this entry
is administering source route configuration management.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.1
ctTransSrIfModemandatory
This object indicates the types of frames (sr,tp or both)
supported by endstations attached to this interface.
This information is used by the device to determine
if sr/tp translation is required. Default is product spe…
Enumerationr/w
Enumerated Values:
1tp
2sr
3srt
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.2
ctTransSrExpModemandatory
This object selects the type of explorer frame the SR or SRT
interface will use, if and when an explorer frame is required.
This object is only applicable when ctTransSrIfMode is set to
sr (2) or srt (3). The requirem…
Enumerationr/w
Enumerated Values:
1notsupported
2are
3ste
4inboundtype
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.3
ctTransSrIPmandatory
This object determines how the sr/tp translation of IP frames
of type 'broadcast', 'destination unknown', or 'destination
known but IP not previously seen for this end station' should
be translated. This object is o…
Enumerationr/w
Enumerated Values:
1tp
2sr
3auto
4notsupported
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.4
ctTransSrIPXmandatory
This object determines how the sr/tp translation of IPX frames
of type `broadcast`, `destination unknown`, or `destination
known but IPX not previously seen for this end station` should
be translated. This object is…
Enumerationr/w
Enumerated Values:
1tp
2sr
3auto
4notsupported
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.5
ctTransSrNetBIOSmandatory
This object determines how the sr/tp translation of NetBIOS frames
of type `broadcast`, `destination unknown`, or `destination
known but NetBIOS not previously seen for this end station` should
be translated. This o…
Enumerationr/w
Enumerated Values:
1tp
2sr
3auto
4notsupported
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.6
ctTransSrSNAmandatory
This object determines how the sr/tp translation of SNA frames
of type 'broadcast', 'destination unknown', or 'destination
known but SNA not previously seen for this end station' should
be translated. This object is…
Enumerationr/w
Enumerated Values:
1tp
2sr
3auto
4notsupported
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.7
ctTransSrOthermandatory
This object determines how the sr/tp translation of all 'other
protocols' is handled. 'other protocols' includes any protocol not
mentioned above (i.e. IP,IPX,NetBIOS, or SNA) or any of those
mentioned above with th…
Enumerationr/w
Enumerated Values:
1tp
2sr
3auto
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.8
ctTransSRLocalSegmentmandatory
The segment (ring) number that uniquely identifies the
segment to which this interface is connected. Current
source routing protocols limit this value to the
range: 0 through 4095. (The value 0 is used by
some managemen…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.9
ctTransSrSRLFmandatory
The maximum size of the INFO field (LLC and
above) that this interface can send/receive. It does
not include any MAC level (framing) octets. The
value of this object is used by this device to
determine whether a modif…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.10
ctTransSRAutoRingNumberDetectmandatory
This object enables an interface to automatically detect
the source route ring number of the attached ring segment.
When enabled, the interface wil automatically each time at
open, configure its ring number with the su…
Enumerationr/w
Enumerated Values:
1notsupported
2enable
3disable
 .1.3.6.1.4.1.52.4.1.3.4.7.1.1.11

ctTransNovellCfgTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.8.1 · 1 row entry · 3 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransNovellCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransNovellCfgTable' 
A list describing the enabled/disabled state of the
Novell translation for each interface on this device.
ctTransNovellCfgEntry row .1.3.6.1.4.1.52.4.1.3.4.8.1.1
A list of objects pertaining to the state of Novell
translation for each interface.
Indexes
Column Syntax OID
ctTransNovellCfgPortmandatory
The MIB-II interface number of the port for which this entry is
administering Novell configuration management.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.8.1.1.1
ctTransNovellCfgModemandatory
Enable this object indicates whether the device will reverse the
bit ordering of addresses in the Novell header on Novell packets.
Enable Type 2 indicates the device will reverse the bit ordering
of addresses for token …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3enabledType2
 .1.3.6.1.4.1.52.4.1.3.4.8.1.1.2
ctTransNovellGroupModemandatory
This object allows the conversion of group and multicast
addresses in the MAC DA of the IPX protocol format. Conversion
is as follows:
TR(C0 00 00 80 00 00) and Canonical (FF FF FF FF FF FF).
TR(C0 00 40 00 00 00) and …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notsupported
 .1.3.6.1.4.1.52.4.1.3.4.8.1.1.3

ctTransIPCfgTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransIPCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransIPCfgTable' 
A list describing the enabled/disabled state of the
IP translation for each interface on this device.
ctTransIPCfgEntry row .1.3.6.1.4.1.52.4.1.3.4.9.1.1
A list of objects pertaining to the state of IP
translation for each interface.
Indexes
Column Syntax OID
ctTransIPCfgPortmandatory
The MIB-II interface number of the port for which this entry
is administering IP configuration management.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.9.1.1.1
ctTransIPDataCfgModemandatory
This object indicates whether the device will reverse the bit
ordering of addresses in the information field of IP data packets
received and then transmitted on this interface.

The default of this objec…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.9.1.1.2
ctTransIPArpCfgModemandatory
This object indicates whether the device will reverse the bit
ordering of addresses in the information field of ARP packets
received and then transmitted on this interface.

The default of this object is …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.9.1.1.3
ctTransIPRarpCfgModemandatory
This object indicates whether the device will reverse the
bit ordering of addresses in the information field of RARP
packets received and then transmitted on this interface.

The default of this object is…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.9.1.1.4

ctTransA2CfgTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.10.1 · 1 row entry · 4 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransA2CfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransA2CfgTable' 
A list describing the enabled/disabled state of the
Appletalk2 translation for each interface on this device.
ctTransA2CfgEntry row .1.3.6.1.4.1.52.4.1.3.4.10.1.1
A list of objects pertaining to the state of Appletalk2
translation for each interface.
Indexes
Column Syntax OID
ctTransA2CfgPortmandatory
The MIB-II interface number of the port for which this entry is
administering Appletalk2 configuration management.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.10.1.1.1
ctTransA2DataCfgModemandatory
This object indicates whether the device will reverse the
bit ordering of addresses in the information field of Appletalk2
data packets received and then transmitted on this interface.

The default of t…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.10.1.1.2
ctTransA2ArpCfgModemandatory
This object indicates whether the device will reverse the
bit ordering of addresses in the information field of ARP
packets received and then transmitted on this interface.

The default of this object is…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.10.1.1.3
ctTransA2McastCfgModemandatory
This object indicates whether the device will reverse the
bit ordering of addresses in the information field of
broadcast/multicast packets received and then transmitted on this
interface.

The default…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.10.1.1.4

ctTransOtherTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.11.1 · 1 row entry · 13 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransOtherTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransOtherTable' 
A list describing processing control for subgroups of LLC frames 
by SAP or SNAP type. This table allows the user to single out 
selected frame type groups for special handling by the processor 
(purely intended as a future upgrade path to add protocols that 
are currently not supported). This list only affects inbound frames 
and is indexed on a per port basis.
ctTransOtherEntry row .1.3.6.1.4.1.52.4.1.3.4.11.1.1
A list of objects pertaining to the processing of subgroups
of LLC frames by SAP or SNAP type.
Indexes
Column Syntax OID
ctTransOtherPortmandatory
The MIB-II interface number of the port for which this entry is
administering control for subgroups of LLC frames by SAP or
SNAP type.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.1
ctTransOtherUnknownSapmandatory
This object indicates whether any frames with an unrecognized SAP
will require special translation handling by the processor. A
recognized SAP will be specified by the user in one of the
previous configuration groups.…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.2
ctTransOtherUnknownSnapmandatory
This object indicates whether frames with an unrecognized SNAP
will require special translation handling by the processor. A
recognized SNAP will be specified by the user in one of the
previous configuration groups.
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.3
ctTransOtherSapDsap1Modemandatory
This object enables(1) or disables (2) the special translation
handling of a SAP frame with a DSAP equal to
ctTransOtherSapDsap1Val.

The default of this object is product specific.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.4
ctTransOtherSapDsap1Valmandatory
This object allows the user to specify a DSAP value that
when matched will require additional translation on frames.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.5
ctTransOtherSapDsap2Modemandatory
This object enables(1) or disables (2) the special translation
handling of a SAP frame with a DSAP equal to
ctTransOtherSapDsap2Val.

The default of this object is product specific.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.6
ctTransOtherSapDsap2Valmandatory
This object allows the user to specify a DSAP value that
when matched will require additional translation on frames.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.7
ctTransOtherSapDsap3Modemandatory
This object enables(1) or disables (2) the special translation
handling of a SAP frame with a DSAP equal to
ctTransOtherSapDsap3Val.

The default of this object is product specific.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.8
ctTransOtherSapDsap3Valmandatory
This object allows the user to specify a DSAP value that
when matched will require additional translation on frames.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.9
ctTransOtherSnap1Modemandatory
When enabled (1) this object the value in ctTransOtherSnap1Val
will be compared against the protocol values of all SNAP frames
received on this interface. A match indicates that the current
frame requires special tra…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.10
ctTransOtherSnap1Valmandatory
This object allows the user to specify a SNAP value to match
against inbound SNAP frames for translation handling.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.11
ctTransOtherSnap2Modemandatory
When enabled (1) this object the value in ctTransOtherSnap2Val
will be compared against the protocol values of all SNAP frames
received on this interface. A match indicates that the current
frame requires special tra…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.12
ctTransOtherSnap2Valmandatory
This object allows the user to specify a SNAP value to match
against inbound SNAP frames for translation handling.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52.4.1.3.4.11.1.1.13

ctTransLfpsTable

table mandatory
.1.3.6.1.4.1.52.4.1.3.4.12.1 · 1 row entry · 3 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk ctTransLfpsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-TRANSLATION-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-TRANSLATION-MIB::ctTransLfpsTable' 
This table is for the user to configure the large frame ports
ability to support large frames. The Large frame port support
is done on a per port basis. The operation affects outbound 
frames only.
ctTransLfpsEntry row .1.3.6.1.4.1.52.4.1.3.4.12.1.1
A list of objects that pertain to the large frame port
support table.
Indexes
Column Syntax OID
ctTransLfpsPortmandatory
The MIB-II interface number of the port for which this entry is
administering control for subgroups of LLC frames by SAP or
SNAP type.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.3.4.12.1.1.1
ctTransLfpsAdminStatusmandatory
When large(1) is the setting all large frames are permissable
out that port. fragment_if_possible(2) is used when the outport
wants ip frames fragmented before transmission. All other non
fragmentable large frames wi…
Enumerationr/w
Enumerated Values:
1large
2fragment-if-possible
3small
4auto
 .1.3.6.1.4.1.52.4.1.3.4.12.1.1.2
ctTransLfpsOperationalStatusmandatory
This value represents the current operational mode of the
interface. The operational mode should reflect what is set in
the ctTransLfpsAdminStatus object. The only exception is when
the user sellects a platform mode tha…
Enumeration
Enumerated Values:
1large
2fragment-if-possible
3small
 .1.3.6.1.4.1.52.4.1.3.4.12.1.1.3