CTATM-CONFIG-MIB Table View

A list of Default Application objects for this interface.

ctATMDefApplicationEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.3.1

An entry containing objects pertaining to the default
application on a physical interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMDefApplicationIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.1
ctATMDefApplicationobsolete The default application to be run on this physical ATM interface. Selecting lane04 will cause the application known as FORE LAN Emulation 0.4 to be the default application on this interface using the spa…	Enumerationr/w Enumerated Values: 1 lane04 2 lane	.1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.2

A list of framer status objects for this interface.

ctATMFramerStatusEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.4.1

An entry containing objects pertaining to status of the framer
on a physical interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMFramerStatusIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.1
ctATMFramerStatusobsolete Setting this object to on will activate the Framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET framing or DS3 framing respectively. i.e., setting it to on will permit g…	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.2

A list of LEC-Index, MAC-address, associated with a particular
VPI, VCI and ATM-address objects on this device.

ctATMLecArpMacEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.5.1

An entry containing objects pertaining to LEC Index,
MAC-address, associated with a particular VPI, VCI and
and ATM-address on this device.

Indexes

lecIndex leArpMacAddress

Column	Syntax	OID
ctATMLecArpMacLecIndexobsolete The lecIndex of the LEC which has learned the MAC-address given by ctATMLecArpMacAddress.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.1
ctATMLecArpMacAddressobsolete The MAC-address which is learned by this LEC.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.2
ctATMLecArpMacElanName The name of the ELAN which is joined by this LEC.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.3
ctATMLecArpMacVpi The data-direct VPI over which traffic destined for the MAC-address ctATMLecArpMacAddress is sent.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.4
ctATMLecArpMacVci The data-direct VCI over which traffic destined for the MAC-address ctATMLecArpMacAddress is sent.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.5
ctATMLecArpMacATMAddress The ATM-address of the destination end-station which is the logical destination of the MAC-address ctATMLecArpMacAddress. The ATM address is returned in a form suitable for printing. The format (separator…	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.6

A list of PvcBwAllocEntries for this physical interface.

ctATMPvcBwAllocEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.6.1

An entry containing objects pertaining to Bandwidth
Allocation.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMPvcBwAllocPhysIfaceobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.1
ctATMPvcBwAllocStatus The values on and off can be written to this object. Selecting on will enable bandwidth allocation mode on this interface. When this mode is enabled all LECs and PVCs currently configured on this interface will be dele…	Enumerationr/w Enumerated Values: 1 on 2 off 3 notSupported	.1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2
ctATMPvcBwAllocBandwidthobsolete Returns the amount of bandwidth in use on this ATM interface in bits per second.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.3

A list of DiscoveryElanEntries for this physical interface.

ctATMDiscoveryElanEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.7.1

An entry containing objects pertaining to discovering elans.

Indexes

RFC1213-MIBifIndex ctATMDiscoveryElanIndex

Column	Syntax	OID
ctATMDiscoveryElanIndex There are a fixed number of elans (1 - MAX_ELANS) per physical interface to initiate the discovery process on. This is the index for these elans. This is NOT related to the LEC Index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.1
ctATMDiscoveryElanName The device will try to discover, on this named elan, any other devices out in the atm cloud that it should set up an svc with. This allows flexibility in the number and location of other switches this particular phys…	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.2
ctATMDiscoveryElanMode Master indicates other elans may discover this elan whereas slave elans may only discover other elans.	Enumerationr/w Enumerated Values: 1 ctATMDiscoveryElanMaster 2 ctATMDiscoveryElanSlave	.1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.3
ctATMDiscoveryElanStatus Enabled indicates this elan should be used in the discovery process whereas disabled elans are not.	Enumerationr/w Enumerated Values: 1 ctATMDiscoveryElanEnabled 2 ctATmDiscoveryElanDisabled	.1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.4
ctATMDiscoveryElanPhysIfaceobsolete The physical interface number on which to initiate the discovery processes.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.5

A list of physical interface number, VPI, VCI, associated
with a virtual ifIndex, application port, ATM Address, and 
Encapsulation type on this device.

ctATMVclEntry row .1.3.6.1.4.1.52.4.1.2.10.1.1.8.1

An entry containing objects pertaining to physical interface
number, VPI, VCI, associated with a particular virtual ifIndex,
application port, ATM Address, and Encapsulation type on this
device.

Indexes

RFC1213-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column	Syntax	OID
ctATMVclIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.1
ctATMVclVpiobsolete The VPI value of the VCL.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.2
ctATMVclVciobsolete The VCI value of the VCL.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.3
ctATMVclVirtualIfIndex Returns an index for the virtual interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.4
ctATMVclApplicationPort Returns an index for the application port to which the information in this table pertains.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.5
ctATMVclATMAddress The ATM-address of the channel entry defined by ctATMVclEntry. The ATM address is returned in a form suitable for printing. The format (separators etc.) is implementation dependent. However, it is recomme…	AtmAddress Type Constraints: range: 20	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.6
ctATMVclEncapsulationType An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multipr…	Enumeration Enumerated Values: 1 vcMultiplexRoutedProtocol 2 vcMultiplexBridgedProtocol8023 3 vcMultiplexBridgedProtocol8025 4 vcMultiplexBridgedProtocol8026 5 vcMultiplexLANemulation8023 6 vcMultiplexLANemulation8025 7 llcEncapsulation 8 multiprotocolFrameRelaySscs 9 other 10 unknown 11 ilmi 12 uni 13 lanEmulationData 14 lanEmulationControl 15 atmVcSvcApp 16 multiProtocolOverATMData 17 multiProtocolOverATMControl	.1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.7

A list of redundancy objects for this physical interface.

ctATMPhyRedundEntry row .1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1

An entry containing objects pertaining to ATM physical
redundancy for a physical interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMPhyRedundIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.1
ctATMPhyRedundPrimaryPort The physical port number to be used as the primary port. The primary port is the default port to become active and the port of priority, i.e. regardless of the status of the current active port, if the primary can be u…	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2
ctATMPhyRedundActivePort The physical port number to be used as the active port. The primary port defaults as the active port if this object is not set. Rules: - This object can always be set when ctATMPhyRedundSt…	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.3
ctATMPhyRedundStatus If this object is set to enable, then redundancy for this interface is enabled. If this object is set to disable, redundancy is disabled. If redundancy is disabled, then automatic switching to backup port…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.4
ctATMPhyRedundActivation If this object is set to automatic, a backup port will automatically be activated upon failure of the active port. If this object is set to manual, it will require the manual setting of ctATMPhyRedundAct…	Enumerationr/w Enumerated Values: 1 automatic 2 manual	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5
ctATMPhyRedundPrimaryRevert If this object is set to automatic, the primary port will automatically be activated upon identifying it to be valid at any time. If this object is set to manual, then the currently active port will not …	Enumerationr/w Enumerated Values: 1 automatic 2 manual	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.6
ctATMPhyRedundPerformTest If this object is set to enable, then the automatic test (at the time given by ctATMPhyRedundTestTOD) is enabled. The test is periodic with a period of 24 hours. If this object is set to disable, then the…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 immediate	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.7
ctATMPhyRedundTestTOD Setting this object will set the time of day at which each redundant port of this interface will be tested for validity. The value is a null terminated string in either hh:mm:ss or hh.mm.ss or hh:mm.ss or hh.mm:ss forma…	OctetStringr/w Constraints: range: 9-9	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.8
ctATMPhyRedundTestResult This object returns the status of the last test performed on all the ports. If the test was performed as a result of ctATMPhyRedundPerformTest.immediate, then the value of this object is of the form 1xx. If the test was…	Enumeration Enumerated Values: 100 manualAllPortsGood 101 manualPrimaryBadOthersGood 102 manualPrimaryGoodOthersBad 103 manualPrimaryBadOthersBad 200 automaticAllPortsGood 201 automaticPrimaryBadOthersGood 202 automaticPrimaryGoodOthersBad 203 automaticPrimaryBadOthersBad	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.9
ctATMPhyRedundReset If this object is set to reset, the state of redundancy on this interface will be reset to factory defaults. When read this object will always return 1.	Enumerationr/w Enumerated Values: 1 reset	.1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10

A list of ILMI objects for this physical ATM interface.

ctATMIlmiEntry row .1.3.6.1.4.1.52.4.1.2.10.1.3.1.1

An entry containing objects pertaining to ILMI for this
physical ATM interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMIlmiIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II interface number for this interface.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.1
ctATMIlmiStatus If this object is set to enableAutoConfigure, then ILMI on this interface will attempt to automatically configure the version of UNI to use on this interface. After the auto configure process has completed, the version …	Enumerationr/w Enumerated Values: 1 enableAutoConfigure 2 enable 3 disable	.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2
ctATMIlmiAtmAddress This object is used as the ATM address of this interface if ILMI on this interface is disabled i.e, the value of IlmiStatus is set to disable. If ILMI address registration is successful (ctATMIlmiState i…	AtmAddressr/w Type Constraints: range: 20	.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3
ctATMIlmiState This object describes the current state of ILMI on this interface. The meaning of the various values returned is as follows: unknown -ILMI is in the process of becoming …	Enumeration Enumerated Values: 1 unknown 2 up 3 addressRegistration 4 autoconfigure 5 down 6 estabConnectivity 7 noLink 8 obtainLECS	.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.4
ctATMIlmiRestart Setting this object to restart will restart ILMI on this interface. Reading this object always returns a 1.	Enumerationr/w Enumerated Values: 1 restart	.1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.5

A list of signaling object for this interface.

ctATMSignalEntry row .1.3.6.1.4.1.52.4.1.2.10.1.4.1.1

An entry containing objects pertaining to ATM signaling
on a physical interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMSignalIfIndexobsolete Returns an index for the physical interface to which the information in this table pertains. It is equal to ifIndex.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.1
ctATMSignalStatus If this object is set to enable, the signalling for this interface is enabled. If this object is set to disable, signalling is disabled. When read, this object returns the state of the object based on the last request m…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.2
ctATMSignalType The type of signalling to be used on this interface. Setting this object to spans will cause the FORE SPANS protocol to be used for signalling on this interface. Setting this object to any …	Enumerationr/w Enumerated Values: 1 unknown 2 spans 3 uni30 4 uni31 5 uni40	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.3
ctATMSignalQ93Status If ctATMSignalType is other than spans, then the value of this object is the state of the layer 3 signalling stack on this interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.4
ctATMSignalQsaalStatus If ctATMSignalType is other than spans, then the value of this object is the state of the layer-2 signalling stack (Q.SAAL) on this interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5
ctATMSignalRestart Setting this object to restart will restart signalling on this interface. Reading this object always returns a 1.	Enumerationr/w Enumerated Values: 1 restart	.1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6

Defines extentions to the lecConfigTable and the lecStatusTable
in the ATM Forum's LANE MIB.

ctATMLANEInfoExtStatusEntry row .1.3.6.1.4.1.52.4.1.2.10.1.6.1.1

An entry containing objects describing information about an
LEC (LAN Emulation Client). It is instanced by lecIndex which
is the same as what is defined in the ATM Forum's LAN Emulation
MIB.

Indexes

lecIndex

Column	Syntax	OID
ctATMLANEInfoExtStatusUpTime The amount of time in milliseconds since the LEC has reached the operational state. It will read 0 if the LEC is not operational.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.1
ctATMLANEInfoExtStatus LEC_active - The LEC is actually trying to become or is operational. See lecInterfaceState in the ATM Forum's LAN Emulation MIB to see which state the LEC is in. LEC_notInService - The LEC is not trying to be…	Enumeration Enumerated Values: 1 lecactive 2 lecnotInService 3 lecnoLink 4 lecnoATMaddrnoUNI 5 lecnoATMaddr 6 lecnoUNI 7 lecmemError	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.2
ctATMLANEInfoExtStatusSendTopo This configuration value is used to define whether or not this LEC should send a LE_TOPOLOGY_CHANGE message when the situation presents itself.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.3
ctATMLANEInfoExtStatusTimeLeft A string used to describe the amount of time left in a certain LEC state before the LEC will try again in that state. This will read NULL if the LEC is operational.	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.4
ctATMLANEInfoExtStatusNumQueues This configuration value is used to define the number of traffic descriptors used by this LEC to implement Traffic Mangement. It's value ranges from 1 to ctATMLANEInfoExtStatusMaxNumQueues.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.5
ctATMLANEInfoExtStatusMaxNumQueues Defines the maximum number that ctATMLANEInfoExtNumQueues can be set to.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.6

Defines a list, of length ctATMLANEInfoExtStatusNumQueues, of traffic
descriptor indexes matching atmTrafficDescrParamIndex in the
atmTrafficDescrParamTable defined in the RFC 1695.

ctATMLANEInfoExtTMEntry row .1.3.6.1.4.1.52.4.1.2.10.1.6.2.1

An entry containing OBJECTS describing information about
an LEC's (LAN Emulation Client) Traffic Management parameters.
It is instanced by lecIndex, which is the same as what is defined
in the ATM Forum's LAN Emulation …

Indexes

lecIndex ctATMLANEInfoExtTMIndex

Column	Syntax	OID
ctATMLANEInfoExtTMIndex Defines the list index and will range from 1 to ctATMLANEInfoExtStatusNumQueues.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.1
ctATMLANEInfoExtTMTrafficDescrIndex Defines a traffic descriptor index that matches the index atmTrafficDescrParamIndex in the atmTrafficDescrParamTable defined in the RFC 1695. NOTE: This table will always be at least of length 1. In th…	ATM-TC-MIBAtmTrafficDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.2

An association between a string describing a traffic 
descriptor and a traffic descriptor index into the 
atmTrafficDescrParamTable in RFC 1695.

ctATMTrafficDescrNameEntry row .1.3.6.1.4.1.52.4.1.2.10.1.7.1.1

An entry containing objects associating a string describing
a traffic descriptor on this device and a traffic descriptor
index into the atmTrafficDescrParamTable in RFC 1695.

Indexes

ATM-MIBatmTrafficDescrParamIndex

Column	Syntax	OID
ctATMTrafficDescrName The name of the traffic descriptor.	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.52.4.1.2.10.1.7.1.1.1

A table related to traffic management service categories supported.

ctATMTrafficServiceCategoriesSupportedEntry row .1.3.6.1.4.1.52.4.1.2.10.1.7.2.1

A table entry containing information related to the traffic
management service categories that are supported for a certain
physical interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ctATMTrafficServiceCategoriesSupportedBitMask This indicates the traffic service categories supported by this physical interface. other(0) Undefined, or service category unknown PVC Bandwidth Allocation(1) Proprie…	Bits Enumerated Values: 0 other 1 pvcBandwidthAllocation 2 cbr 3 vbrnrt 4 ubr 5 abr 6 vbrrt	.1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.1
ctATMTrafficManagementAllocBandwidth Returns the amount of bandwidth in use on this ATM interface in bits per second. Value only valid when running more than just UBR traffic.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.2