CPQSTSYS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
136

cpqSsDrvBoxTable

table mandatory
.1.3.6.1.4.1.232.8.2.1 · 1 row entry · 31 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsDrvBoxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsDrvBoxTable' 
Drive Box Table.
cpqSsDrvBoxEntry row .1.3.6.1.4.1.232.8.2.1.1
Drive Box Entry.
Indexes
Column Syntax OID
cpqSsBoxCntlrIndexmandatory
Drive Box Controller Index.

The controller index indicates to which adapter card instance
this table entry belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.1.1.1
cpqSsBoxBusIndexmandatory
Drive Box Bus Index.

The bus index indicates to which bus instance on an adapter card
this table entry belongs.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.1.1.2
cpqSsBoxTypeobsolete
Drive Box Type.

This is the type of drive box. The following types are defined:

other(1)
The agent does not recognize this drive storage system.

proLiant(2)
…
Enumeration
Enumerated Values:
1other
2proLiant
3proLiant2
4proLiant2Internal
5proLiant2DuplexTop
6proLiant2DuplexBottom
7proLiant2InternalDuplexTop
8proLiant2InternalDuplexBottom
 .1.3.6.1.4.1.232.8.2.1.1.3
cpqSsBoxModelmandatory
Drive Box Model.

This is a description of the drive box`s model.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.232.8.2.1.1.4
cpqSsBoxFWRevmandatory
Drive Box Firmware Revision.

This is the revision level of the drive box.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.1.1.5
cpqSsBoxVendormandatory
Drive Box Vendor

This is the drive box`s vendor name.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-9
 .1.3.6.1.4.1.232.8.2.1.1.6
cpqSsBoxFanStatusmandatory
Drive Box Fan Status.

This is the current status of the fans in the drive box.
This value will be one of the following:
other(1)
Fan monitoring is not supported by this system
or it is not su…
Enumeration
Enumerated Values:
1other
2ok
3failed
4noFan
5degraded
 .1.3.6.1.4.1.232.8.2.1.1.7
cpqSsBoxConditionmandatory
SCSI Drive Box Condition.

This is the overall condition of the drive box.
The following values are defined:

other(1)
The agent does not recognize the status. You may need to
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.1.1.8
cpqSsBoxTempStatusmandatory
The temperature of the drive system.

This value will be one of the following:
other(1)
Temperature monitoring is not supported by this system
or it is not supported by the driver.

ok(2)…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
5noTemp
 .1.3.6.1.4.1.232.8.2.1.1.9
cpqSsBoxSidePanelStatusmandatory
Drive Box Side Panel Status.

This value will be one of the following:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.

sidePanelInPlace(2)
The…
Enumeration
Enumerated Values:
1other
2sidePanelInPlace
3sidePanelRemoved
4noSidePanelStatus
 .1.3.6.1.4.1.232.8.2.1.1.10
cpqSsBoxFltTolPwrSupplyStatusmandatory
This value specifies the overall status of the fault tolerant
power supply sub-system in a drive box.

This value will be one of the following:
other(1)
The power supply status cannot be determined.
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
5noFltTolPower
 .1.3.6.1.4.1.232.8.2.1.1.11
cpqSsBoxBackPlaneVersionmandatory
Drive Box Back Plane Version.

This is the version of the drive box back plane. The following
types are defined:

other(1)
The agent does not recognize this drive storage system b…
Enumeration
Enumerated Values:
1other
2proLiant
3proLiant2
4proLiant3
5proLiant4
6proLiant5
 .1.3.6.1.4.1.232.8.2.1.1.12
cpqSsBoxTotalBaysmandatory
Drive Box Total Bays.

This is the total number of bays in this storage system. If the
value cannot be determined or does not apply, -1 is returned.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.1.1.13
cpqSsBoxPlacementmandatory
Drive Box Placement.

The following values are defined:

other(1)
The agent is unable to determine if this storage system is
located internal or external to the system chassis.
…
Enumeration
Enumerated Values:
1other
2internal
3external
 .1.3.6.1.4.1.232.8.2.1.1.14
cpqSsBoxDuplexOptionmandatory
Drive Box Duplex Option.

The following values are defined:

other(1)
The agent is unable to determine if this storage system is
duplexed.

notDuplexed(2)
This storage sys…
Enumeration
Enumerated Values:
1other
2notDuplexed
3duplexTop
4duplexBottom
 .1.3.6.1.4.1.232.8.2.1.1.15
cpqSsBoxBoardRevisionmandatory
Drive Box Board Revision.

This is the board revision of this storage system backplane.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.1.1.16
cpqSsBoxSerialNumbermandatory
Drive Box Serial Number.

This is the drive box`s serial number which is normally display
on the front panel. This can be used for identification
purposes. If the box`s serial number cannot be determined,…
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.1.1.17
cpqSsBoxCntlrHwLocationmandatory
A text description of the hardware location of the controller
to which this box is attached. A NULL string indicates that
the hardware location could not be determined or is irrelevant.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.1.1.18
cpqSsBoxBackplaneSpeedmandatory
Drive Box Backplane Speed.

The following values are defined:

other(1)
The agent is unable to determine the backplane speed for this
storage system.

ultra3(2)
This stora…
Enumeration
Enumerated Values:
1other
2ultra3
3ultra320
 .1.3.6.1.4.1.232.8.2.1.1.19
cpqSsBoxConnectionTypemandatory
Drive Box Connection Type.

The following values are defined:

other(1)
The agent is unable to determine the type of connection to
this storage system.

scsiAttached(2)
Th…
Enumeration
Enumerated Values:
1other
2scsiAttached
3sasAttached
4sataAttached
 .1.3.6.1.4.1.232.8.2.1.1.20
cpqSsBoxHostConnectormandatory
Drive Box Host Connector.

This is the host connector to which the drive box is attached.
If the host connector cannot be determined, the agent will
return a NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.8.2.1.1.21
cpqSsBoxBoxOnConnectormandatory
Drive Box, Box on Connector.

The box on connector indicates which box instance this table
entry belongs. The instances start at one and increment for
each box attached to a connector. If the value canno…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.1.1.22
cpqSsBoxLocationStringmandatory
Drive Box Location String.

This string describes the location of the drive box in relation
to the controller to which it is attached. If the location
string cannot be determined, the agent will return a …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.1.1.23
cpqSsBoxInitiatorSasAddressmandatory
Drive Box Initiator SAS Address String.

This string describes the SAS address of the initiator connected
to the drive box. If the drive box initiator SAS address string
cannot be determined, the agent w…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.232.8.2.1.1.24
cpqSsBoxTargetSasAddressmandatory
Drive Box Target SAS Address String.

This string describes the SAS address of the target (i.e. the
drive box itself). If the drive box target SAS address string
cannot be determined, the agent will retu…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.232.8.2.1.1.25
cpqSsBoxLocalManageIpAddressmandatory
Drive Box Local Management IP Address String.

This string reports the management IP address for the
storage box primary controller. If the drive box local management
IP address string cannot be determine…
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.232.8.2.1.1.26
cpqSsBoxPartnerManageIpAddressmandatory
Drive Box Partner Management IP Address String.

This string reports the management IP address for the
storage box partner controller. If the drive box partner management
IP address string cannot be deter…
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.232.8.2.1.1.27
cpqSsBoxConnectionStatusmandatory
Drive Box Connection Status.

The following values are defined:

other(1)
The agent is unable to determine the storage system`s
connection status.

notSupported(2)
Repo…
Enumeration
Enumerated Values:
1other
2notSupported
3connected
4notConnected
 .1.3.6.1.4.1.232.8.2.1.1.28
cpqSsBoxTargetBasedManagementmandatory
Drive Box Target Based Management.

The following values are defined:

other(1)
The agent is unable to determine if this storage system
supports target based management.
…
Enumeration
Enumerated Values:
1other
2tbmNotSupported
3tbmSupported
 .1.3.6.1.4.1.232.8.2.1.1.29
cpqSsBoxGSIStatusmandatory
Drive Box GSI Status.

This is the status based on the stateof the
Global Service Indicator.
The following values are defined:

other(1)
The agent does not recognize the status. Yo…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.1.1.30
cpqSsBoxGSIMessagesmandatory
Drive Box GSI Messages.

This string will contain any error message from the drive box
describing why the Global Service Indicator is set.
Please refer to User Documentation for the attached device
to find…
OctetString
Constraints:
range: 0-511
 .1.3.6.1.4.1.232.8.2.1.1.31

cpqSsChassisTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.1 · 1 row entry · 26 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsChassisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsChassisTable' 
Storage System Chassis Table.
cpqSsChassisEntry row .1.3.6.1.4.1.232.8.2.2.1.1
Storage System Chassis Entry.
Indexes
Column Syntax OID
cpqSsChassisIndexmandatory
Storage System Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.1.1.1
cpqSsChassisConnectionTypemandatory
Storage System Chassis Connection Type.

The following values are defined:

other(1)
The agent is unable to determine the type of connection to
this chassis.

…
Enumeration
Enumerated Values:
1other
2fibreAttached
3scsiAttached
4iScsiAttached
5sasAttached
 .1.3.6.1.4.1.232.8.2.2.1.1.2
cpqSsChassisSerialNumbermandatory
Storage System Chassis Serial Number.

This is the storage system chassis`s serial number which is normally
displayed on the front panel. This can be used for identification
purposes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.8.2.2.1.1.3
cpqSsChassisNamemandatory
Storage System Chassis Name.

This is a user defined name for this storage system chassis.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.8.2.2.1.1.4
cpqSsChassisSystemBoardSerNummandatory
Storage System Chassis System Controller Board Serial Number.

This is the system controller board`s serial number. This can be
used for identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.1.1.5
cpqSsChassisSystemBoardRevmandatory
Storage System Chassis System Controller Board Revision.

This is the system controller board revision.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.1.1.6
cpqSsChassisPowerBoardSerNummandatory
Storage System Chassis Power Backplane Board Serial Number.

This is the power backplane board`s serial number. This can be used
for identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.1.1.7
cpqSsChassisPowerBoardRevmandatory
Storage System Chassis Power Backplane Board Revision.

This is the power backplane board revision.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.1.1.8
cpqSsChassisScsiBoardSerNummandatory
Storage System Chassis SCSI Drive Backplane Board Serial
Number.

This is the SCSI drive backplane board`s serial number. This can be
used for identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.1.1.9
cpqSsChassisScsiBoardRevmandatory
Storage System Chassis SCSI Drive Backplane Board Revision.

This is the SCSI drive backplane board revision.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.1.1.10
cpqSsChassisOverallConditionmandatory
Storage System Chassis Overall Condition.

This is the condition of the storage system chassis and all of its
components. The following values are defined:

other(1)
The agent does…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.11
cpqSsChassisPowerSupplyConditionmandatory
Storage System Power Supply Condition.

This is the aggregate condition of all power supplies in
the storage system chassis. The following values are defined:

other(1)
The agent d…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.12
cpqSsChassisFanConditionmandatory
Storage System Fan Condition.

This is the aggregate condition of all fan modules in the
storage system chassis. The following values are defined:

other(1)
The agent does not reco…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.13
cpqSsChassisTemperatureConditionmandatory
Storage System Temperature Condition.

This is the aggregate condition of all the temperatur sensors
in the storage system chassis. The following values are defined:

other(1)
The …
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.14
cpqSsChassisFcaCntlrConditionmandatory
Storage System Fibre Channel Array Controller Condition.

This is the aggregate condition of all Fibre Channel Array controllers
in the storage system chassis. The following values are defined:
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.15
cpqSsChassisFcaLogicalDriveConditionmandatory
Storage System Fibre Channel Array Logical Drive Condition.

This is the aggregate condition of all Fibre Channel Array Logical
Drives in this storage system chassis.
The following values are defined:
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.16
cpqSsChassisFcaPhysDrvConditionmandatory
Storage System Fibre Channel Array Physical Drive Condition.

This is the aggregate condition of all Fibre Channel Array Physical
Drives in this storage system chassis.
The following values are defined:
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.17
cpqSsChassisTimemandatory
Storage System Chassis Time.

This is the storage system chassis`s time in tenths of seconds.
If the chassis time is not supported, the agent will return 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.1.1.18
cpqSsChassisModelmandatory
Storage System Chassis Model.

The following values are defined:

other(1)
The agent is unable to determine the model of this chassis.

ra4x00(2)
Compaq Stor…
Enumeration
Enumerated Values:
1other
2ra4x00
3msa1000
4smartArrayClusterStorage
5enterpriseModularArray
6enterpriseVirtualArray
7msa500G2
8msa20
9msa1500cs
10msa1510i
 .1.3.6.1.4.1.232.8.2.2.1.1.19
cpqSsChassisBackplaneConditionmandatory
Storage System Backplane Condition.

This is the aggregate condition of all the backplanes for the
storage system chassis. The following values are defined:

other(1)
The agent doe…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.20
cpqSsChassisFcaTapeDrvConditionmandatory
Storage System Array Tape Drive Condition.

This is the aggregate condition of all tape drives in this storage
system chassis.
The following values are defined:

other(1)
The condit…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.21
cpqSsChassisRsoStatusmandatory
Storage System Chassis Recovery Server Option Status.

The following values are defined:

other(1)
The recovery server option status cannot be determined for
this storage syst…
Enumeration
Enumerated Values:
1other
2notSupported
3notConfigured
4disabled
5daemonDownDisabled
6ok
7daemonDownActive
8noSecondary
9daemonDownNoSecondary
10linkDown
11daemonDownLinkDown
12secondaryRunningAuto
13secondaryRunningUser
14evTimeoutError
 .1.3.6.1.4.1.232.8.2.2.1.1.22
cpqSsChassisRsoConditionmandatory
Storage System Chassis Recovery Server Option Condition.

This is the condition of the recovery server option. The
following values are defined:

other(1)
The agent does not recogn…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.1.1.23
cpqSsChassisScsiIoModuleTypemandatory
Storage System Chassis SCSI I/O Module Type.

The following values are defined:

other(1)
The agent does not recognize SCSI I/O module type. You may
need to upgrade your soft…
Enumeration
Enumerated Values:
1other
2io2port
3io4portUpgradeFirmware
4io4port
5io2port320
6io4port320
7io1port320
 .1.3.6.1.4.1.232.8.2.2.1.1.24
cpqSsChassisPreferredPathModemandatory
Array Controller Preferred Path Mode.

This is the storage system active/active preferred path mode.
The following values are valid:

other (1)
Indicates that the agent does not recognize t…
Enumeration
Enumerated Values:
1other
2notActiveActive
3automatic
4manual
 .1.3.6.1.4.1.232.8.2.2.1.1.25
cpqSsChassisProductIdmandatory
Storage System Chassis Product Identifier.

This is the storage system chassis's product identifier. This can
be used for identification purposes. If the product identifier can
not be determined, the age…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.8.2.2.1.1.26

cpqSsIoSlotTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsIoSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsIoSlotTable' 
Storage System I/O Slot Table.
cpqSsIoSlotEntry row .1.3.6.1.4.1.232.8.2.2.2.1
Storage System I/O Slot Entry.
Indexes
Column Syntax OID
cpqSsIoSlotChassisIndexmandatory
Storage System I/O Slot Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.2.1.1
cpqSsIoSlotIndexmandatory
Storage System I/O Slot Index.

This index uniquely identifies a storage system I/O Slot.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.2.1.2
cpqSsIoSlotControllerTypemandatory
Storage System I/O Slot Controller Type.

The following values are defined:

other(1)
The agent is unable to determine if anything is installed in
this storage system I/O slot.
…
Enumeration
Enumerated Values:
1other
2notInstalled
3unknownBoard
4fibreArray
5scsiArray
6noSlot
7iScsiArray
8sasArray
 .1.3.6.1.4.1.232.8.2.2.2.1.3

cpqSsPowerSupplyTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsPowerSupplyTable' 
Storage System Power Supply Table.
cpqSsPowerSupplyEntry row .1.3.6.1.4.1.232.8.2.2.3.1
Storage System Power Supply Entry.
Indexes
Column Syntax OID
cpqSsPowerSupplyChassisIndexmandatory
Storage System Power Supply Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.3.1.1
cpqSsPowerSupplyIndexmandatory
Storage System Power Supply Bay.

This index uniquely identifies a power supply bay.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.3.1.2
cpqSsPowerSupplyBaymandatory
Storage System Power Supply Bay.

The following values are defined:

other(1)
The agent does not recognize the bay. You may need to upgrade
your software.

…
Enumeration
Enumerated Values:
1other
2powerBay1
3powerBay2
4composite
 .1.3.6.1.4.1.232.8.2.2.3.1.3
cpqSsPowerSupplyStatusmandatory
Storage System Power Supply Status.

The following values are defined:

other(1)
The agent is unable to determine if this storage system power
supply bay is occupied.
…
Enumeration
Enumerated Values:
1other
2notInstalled
3ok
4failed
5degraded
 .1.3.6.1.4.1.232.8.2.2.3.1.4
cpqSsPowerSupplyUpsStatusmandatory
Storage System Power Supply Uninterruptible Power Supply (UPS)
Status.

The following values are defined:

other(1)
The agent is unable to determine if this power supply is
a…
Enumeration
Enumerated Values:
1other
2noUps
3ok
4powerFailed
5batteryLow
 .1.3.6.1.4.1.232.8.2.2.3.1.5
cpqSsPowerSupplyConditionmandatory
Storage System Power Supply Condition.

This is the condition of the storage system chassis and all of
its components. The following values are defined:

other(1)
The agent does no…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.3.1.6
cpqSsPowerSupplySerialNumbermandatory
Storage System Power Supply Serial Number.

This is the power supply's serial number. This can be used
for identification purposes. If the serial number is not supported,
the agent will return a NULL str…
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.3.1.7
cpqSsPowerSupplyBoardRevisionmandatory
Storage System Power Supply Board Revision.

This is the power supply board revision. If the board revision is
not supported, the agent will return a NULL string.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.3.1.8
cpqSsPowerSupplyFirmwareRevisionmandatory
Storage System Power Supply Firmware Revision.

This is the power supply firmware revision. If the firmware revision
is not supported, the agent will return a NULL string.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.3.1.9

cpqSsFanModuleTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsFanModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsFanModuleTable' 
Storage System Fan Module Table.
cpqSsFanModuleEntry row .1.3.6.1.4.1.232.8.2.2.4.1
Storage System Fan Module Entry.
Indexes
Column Syntax OID
cpqSsFanModuleChassisIndexmandatory
Storage System Fan Module Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.4.1.1
cpqSsFanModuleIndexmandatory
Storage System Fan Module Index.

This index uniquely identifies a storage system fan module.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.4.1.2
cpqSsFanModuleStatusmandatory
Storage System Fan Module Status.

The following values are defined:

other(1)
The agent is unable to determine if this storage system fan
module is installed.

…
Enumeration
Enumerated Values:
1other
2notInstalled
3ok
4degraded
5failed
 .1.3.6.1.4.1.232.8.2.2.4.1.3
cpqSsFanModuleConditionmandatory
Storage System Fan Module Condition.

This is the condition of the storage system fan module.
The following values are defined:

other(1)
The agent does not recognize the status. Y…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.4.1.4
cpqSsFanModuleLocationmandatory
Storage System Fan Module Location.

The following values are defined:

other(1)
The agent is unable to determine the location of this storage
system fan module.

…
Enumeration
Enumerated Values:
1other
2fanBay
3composite
4fanBay2
 .1.3.6.1.4.1.232.8.2.2.4.1.5
cpqSsFanModuleSerialNumbermandatory
Storage System Fan Module Serial Number.

This is the fan module's serial number. This can be used
for identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.4.1.6
cpqSsFanModuleBoardRevisionmandatory
Storage System Fan Module Board Revision.

This is the fan module board revision.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.4.1.7

cpqSsTempSensorTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.5 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsTempSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsTempSensorTable' 
Storage System Temperature Sensor Table.
cpqSsTempSensorEntry row .1.3.6.1.4.1.232.8.2.2.5.1
Storage System Temperature Sensor Entry.
Indexes
Column Syntax OID
cpqSsTempSensorChassisIndexmandatory
Storage System Temperature Sensor Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.5.1.1
cpqSsTempSensorIndexmandatory
Storage System Temperature Sensor Index.

This index uniquely identifies a temperature sensor.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.5.1.2
cpqSsTempSensorStatusmandatory
Storage System Temperature Sensor Status.

The following values are defined:

other(1)
The agent is unable to determine if the storage system
temperature sensor status.
…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.5.1.3
cpqSsTempSensorConditionmandatory
Storage System Fan Module Condition.

This is the condition of the storage system temperature sensor.
The following values are defined:

other(1)
The agent does not recognize the st…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.5.1.4
cpqSsTempSensorLocationmandatory
Storage System Fan Module Location.

The following values are defined:

other(1)
The agent is unable to determine the location of this storage
system temperature sensor.
…
Enumeration
Enumerated Values:
1other
2fanBay
3backplane
 .1.3.6.1.4.1.232.8.2.2.5.1.5
cpqSsTempSensorCurrentValuemandatory
Storage System Temperature Sensor Current Value.

The current value of the temperature sensor in degrees Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.5.1.6
cpqSsTempSensorLimitValuemandatory
Storage System Temperature Sensor Limit Value.

The limit value of the temperature sensor in degrees Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.5.1.7
cpqSsTempSensorHysteresisValuemandatory
Storage System Temperature Sensor Hysteresis Value.

The hysteresis value of the temperature sensor in degrees Celsius.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.5.1.8

cpqSsBackplaneTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.6 · 1 row entry · 20 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsBackplaneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsBackplaneTable' 
Storage System SCSI Backplane Table.
cpqSsBackplaneEntry row .1.3.6.1.4.1.232.8.2.2.6.1
Storage System SCSI Backplane Entry.
Indexes
Column Syntax OID
cpqSsBackplaneChassisIndexmandatory
Storage System Backplane Chassis Index.

The chassis index uniquely identifies a storage system chassis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.6.1.1
cpqSsBackplaneIndexmandatory
Storage System Backplane Index.

This index uniquely identifies a storage system backplane.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.6.1.2
cpqSsBackplaneFWRevmandatory
Storage System Backplane Firmware Revision.

This is the revision level of storage system backplane.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.8.2.2.6.1.3
cpqSsBackplaneDriveBaysmandatory
Storage System Backplane Drive Bays.

This is the number of bays on this storage system backplane.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.6.1.4
cpqSsBackplaneDuplexOptionmandatory
Storage System Backplane Duplex Option.

The following values are defined:

other (1)
The agent is unable to determine if this storage
system is duplexed.

n…
Enumeration
Enumerated Values:
1other
2notDuplexed
3duplexTop
4duplexBottom
 .1.3.6.1.4.1.232.8.2.2.6.1.5
cpqSsBackplaneConditionmandatory
Storage System Backplane Condition.

This is the overall condition of the backplane.
The following values are defined:

other(1)
The agent does not recognize the status. You may ne…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.6.1.6
cpqSsBackplaneVersionmandatory
Storage System Backplane Version.

This is the version of the drive box back plane.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.6.1.7
cpqSsBackplaneVendormandatory
Storage System Backplane Vendor

This is the storage box`s vendor name.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-9
 .1.3.6.1.4.1.232.8.2.2.6.1.8
cpqSsBackplaneModelmandatory
Storage System Backplane Model.

This is a description of the storage system`s model.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.232.8.2.2.6.1.9
cpqSsBackplaneFanStatusmandatory
Storage System Backplane Fan Status.

This is the current status of the fans in the storage system.
This value will be one of the following:

other(1)
The agent is unable to determine…
Enumeration
Enumerated Values:
1other
2notInstalled
3ok
4degraded
5failed
6notSupported
7degraded-Fan1Failed
8degraded-Fan2Failed
 .1.3.6.1.4.1.232.8.2.2.6.1.10
cpqSsBackplaneTempStatusmandatory
Storage System Backplane Fan Status.

This value will be one of the following:

other(1)
The agent is unable to determine if this storage system has
temperature monitoring.
…
Enumeration
Enumerated Values:
1other
2noTemp
3ok
4degraded
5failed
6notSupported
 .1.3.6.1.4.1.232.8.2.2.6.1.11
cpqSsBackplaneFtpsStatusmandatory
Storage System Backplane Fault Tolerant Power Supply Status.

This value specifies the overall status of the redundant power
supply in a drive box. This value will be one of the following:

…
Enumeration
Enumerated Values:
1other
2noFltTolPower
3ok
4degraded
5failed
6notSupported
7noFltTolPower-Bay1Missing
8noFltTolPower-Bay2Missing
 .1.3.6.1.4.1.232.8.2.2.6.1.12
cpqSsBackplaneSerialNumbermandatory
Storage System Backplane Serial Number.

This is the storage system backplane serial number which is normally
displayed on the front bezel. This can be used for identification
purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.2.2.6.1.13
cpqSsBackplanePlacementmandatory
Storage System Backplane Placement.

The following values are defined:

other(1)
The agent is unable to determine if this storage system is
located internal or external to the system chas…
Enumeration
Enumerated Values:
1other
2internal
3external
 .1.3.6.1.4.1.232.8.2.2.6.1.14
cpqSsBackplaneBoardRevisionmandatory
Storage System Backplane Board Revision.

This is the board revision of this storage system backplane.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.6.1.15
cpqSsBackplaneSpeedmandatory
Storage System Backplane Speed.

The following values are defined:

other(1)
The agent is unable to determine the backplane speed for this
storage system.

ultra3(2)
This …
Enumeration
Enumerated Values:
1other
2ultra3
3ultra320
4sata
 .1.3.6.1.4.1.232.8.2.2.6.1.16
cpqSsBackplaneConnectionTypemandatory
Backlane Box Connection Type.

The following values are defined:

other(1)
The agent is unable to determine the type of connection to
this backplane.

scsiAttached(2)
This…
Enumeration
Enumerated Values:
1other
2scsiAttached
3sasAttached
 .1.3.6.1.4.1.232.8.2.2.6.1.17
cpqSsBackplaneConnectormandatory
Backplane Connector.

This is the connector to which the backplane is attached.
If the backplane connector cannot be determined, the agent will
return a NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.8.2.2.6.1.18
cpqSsBackplaneOnConnectormandatory
Backplane on Connector.

The backplane on connector indicates to which backplane instance
this table entry belongs. The instances start at one and
increment for each backplane attached to a connector.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.6.1.19
cpqSsBackplaneLocationStringmandatory
Backplane Location String.

This string describes the location of the backplane in relation
to the controller to which it is attached. If the location
string cannot be determined, the agent will return a …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.6.1.20

cpqSsFibreAttachmentTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.7 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsFibreAttachmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsFibreAttachmentTable' 
Storage System Fibre Attachment Table.
cpqSsFibreAttachmentEntry row .1.3.6.1.4.1.232.8.2.2.7.1
Storage System Fibre Attachment Entry.
Indexes
Column Syntax OID
cpqSsFibreAttachmentIndexmandatory
Storage System Fibre Attachment Index.

The index uniquely identifies a Fibre Attachment association entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.7.1.1
cpqSsFibreAttachmentHostControllerIndexmandatory
Storage System Fibre Attachment Host Controller Index.

The host controller index indicates which host controller is
associated with this entry. This is equal to cpqFcaHostCntlrIndex,
from the Fibre Chann…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.7.1.2
cpqSsFibreAttachmentHostControllerPortmandatory
Storage System Fibre Attachment Host Controller Port.

This is the Fibre port number of the host controller. For each host
controller, the port number starts at 1 and increments for each port.
This is cur…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.7.1.3
cpqSsFibreAttachmentDeviceTypemandatory
Storage System Fibre Attachment Device Type.

This is the type of device associated with this entry.
The following values are defined:

other(1)
The agent is unable to determine if the type …
Enumeration
Enumerated Values:
1other
2storageBox
3tapeController
4fibreChannelSwitch
 .1.3.6.1.4.1.232.8.2.2.7.1.4
cpqSsFibreAttachmentDeviceIndexmandatory
Storage System Fibre Attachment Device Index.

The is the index for the Fibre attached device. For a Fibre
attached storage system, this is equal to cpqSsChassisIndex from the
Storage System Chassis Table…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.7.1.5
cpqSsFibreAttachmentDevicePortmandatory
Storage System Fibre Attachment Device Port.

This is the Fibre port on a device. For a Fibre attached storage
system, this is equal to cpqFcaCntlrBoxIoSlot from the Fibre Channel
Array Controller Table. …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.7.1.6

cpqSsScsiAttachmentTable

table mandatory
.1.3.6.1.4.1.232.8.2.2.8 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsScsiAttachmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsScsiAttachmentTable' 
Storage System SCSI Attachment Table.
cpqSsScsiAttachmentEntry row .1.3.6.1.4.1.232.8.2.2.8.1
Storage System SCSI Attachment Entry.
Indexes
Column Syntax OID
cpqSsScsiAttachmentIndexmandatory
Storage System SCSI Attachment Index.

The index uniquely identifies a SCSI Attachment association entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.2.8.1.1
cpqSsScsiAttachmentControllerIndexmandatory
Storage System SCSI Attachment Controller Index.

The controller index indicates which internal array controller is
associated with this entry. This is equal to cpqDaCntlrIndex,
from the Array Controller …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.8.1.2
cpqSsScsiAttachmentControllerPortmandatory
Storage System SCSI Attachment Controller Port.

The controller port indicates which SCSI port of an internal
controller is associated with this entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.8.1.3
cpqSsScsiAttachmentControllerTargetmandatory
Storage System SCSI Attachment Controller Target.

The controller target indicates which SCSI target is associated with
this entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.8.1.4
cpqSsScsiAttachmentControllerLunmandatory
Storage System SCSI Attachment Controller Lun.

The controller Lun indicates which SCSI Lun is associated with this
entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.8.1.5
cpqSsScsiAttachmentChassisIndexmandatory
Storage System SCSI Attachment Chassis Index.

The is the index for the SCSI attached storage system. This is equal
to cpqSsChassisIndex from the Storage System Chassis Table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.8.2.2.8.1.6
cpqSsScsiAttachmentChassisIoSlotmandatory
Storage System SCSI Attachment Chassis I/O Slot.

This is the I/O slot in the SCSI attached storage system. This is
equal to cpqFcaCntlrBoxIoSlot from the Fibre Channel Array Controller
Table.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.2.8.1.7
cpqSsScsiAttachmentPathStatusmandatory
Storage System SCSI Attachment Path Status.

This is the status of this path to the chassis. The following
values are defined:

other(1)
The agent does not recognize the status. Y…
Enumeration
Enumerated Values:
1other
2ok
3offline
 .1.3.6.1.4.1.232.8.2.2.8.1.8
cpqSsScsiAttachmentPathConditionmandatory
Storage System SCSI Attachment Path Condition.

This is the condition of this path to the chassis.
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.2.2.8.1.9

cpqSsDrvBoxPathTable

table mandatory
.1.3.6.1.4.1.232.8.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsDrvBoxPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsDrvBoxPathTable' 
Drive Box Access Path Table.
cpqSsDrvBoxPathEntry row .1.3.6.1.4.1.232.8.2.3.1
Drive Box Access Path Entry.
Indexes
Column Syntax OID
cpqSsDrvBoxPathCntlrIndexmandatory
Drive Box Access Path Controller Index.

The controller index indicates to which adapter card instance
this table entry belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.3.1.1
cpqSsDrvBoxPathBoxIndexmandatory
Drive Box Access Path Box Index.

The box index indicates to which box instance on an adapter card
this table entry belongs. The value of this index is the same as
cpqSsDrvBoxBusIndex used under the drive …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.3.1.2
cpqSsDrvBoxPathIndexmandatory
Drive Box Access Path Index.

This path index keeps track of multiple instances of access
paths from a controller to a storage box. This number, along with
the cpqSsDrvBoxPathCntlrIndex and cpqSsDrvBoxPath…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.3.1.3
cpqSsDrvBoxPathStatusmandatory
Drive Box Access Path Status.

This shows the status of the drive box access path. The
following values are valid:

Other (1)
Indicates that the instrument agent can not determine the
st…
Enumeration
Enumerated Values:
1other
2ok
3linkDown
 .1.3.6.1.4.1.232.8.2.3.1.4
cpqSsDrvBoxPathCurrentRolemandatory
Drive Box Access Path Current Role.

This shows the current role of drive box acess path. The
following values are valid:

Other (1)
Indicates that the instrument agent does not recognize …
Enumeration
Enumerated Values:
1other
2active
3alternate
 .1.3.6.1.4.1.232.8.2.3.1.5
cpqSsDrvBoxPathHostConnectormandatory
Drive Box Access Path Host Connector.

This is the host connector to which the access path is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.8.2.3.1.6
cpqSsDrvBoxPathBoxOnConnectormandatory
Drive Box Access Path Box on Connector.

The box on connector indicates to which box instance this
access path belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.8.2.3.1.7
cpqSsDrvBoxPathLocationStringmandatory
Drive Box Access Path Location String.

This string describes drive box access path in relation to the
controller to which it is attached. If the location string
cannot be determined, the agent will retur…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.2.3.1.8

cpqSsTrapLogTable

table obsolete
.1.3.6.1.4.1.232.8.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsTrapLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsTrapLogTable' 
An ordered list of trap log entries (conceptually a queue).
The trap log entries will be kept in the order in which they
were generated with the most recent trap at index 1 and the
oldest trap entry at index trapLogMaxSize.  If the maximum
number size has been reached and a new trap occurs the oldest
trap will be removed when the new trap is added so the
trapMaxLogSize is not exceeded.
cpqSsTrapLogEntry row .1.3.6.1.4.1.232.8.3.3.1
A description of a trap event.
Indexes
Column Syntax OID
cpqSsTrapLogIndexobsolete
The value of this object uniquely identifies this trapLogEntry
at this time. The most recent trap will have an index of 1 and
the oldest trap will have an index of trapLogMaxSize. Because of
the queue-like nature of t…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.8.3.3.1.1
cpqSsTrapTypeobsolete
The type of the trap event that this entry describes. This
number refers to an entry in a list of traps enumerating the
possible traps the agent may issue.
Enumeration
Enumerated Values:
1cpqSsFanStatusChange
8001cpqSs2FanStatusChange
8002cpqSsTempFailed
8003cpqSsTempDegraded
8004cpqSsTempOk
8005cpqSsSidePanelInPlace
8006cpqSsSidePanelRemoved
 .1.3.6.1.4.1.232.8.3.3.1.2
cpqSsTrapTimeobsolete
The time of the trap event that this entry describes. The time
is given in year (first octet), month, day of month, hour,
minute, second (last octet) order. Each octet gives the value in
BCD.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.232.8.3.3.1.3

cpqSsRaidSystemTable

table mandatory
.1.3.6.1.4.1.232.8.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqSsRaidSystemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQSTSYS-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQSTSYS-MIB::cpqSsRaidSystemTable' 
RAID Storage System Table.
cpqSsRaidSystemEntry row .1.3.6.1.4.1.232.8.4.1.1
RAID Storage System Entry.
Indexes
Column Syntax OID
cpqSsRaidSystemIndexmandatory
RAID Storage System Index.

The RAID Storage System index indicates to which storage system instance
this table entry belongs.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.4.1.1.1
cpqSsRaidSystemNamemandatory
RAID Storage System Name.

This is a description of the RAID Storage System`s name.
This can be used for identification purposes.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.8.4.1.1.2
cpqSsRaidSystemStatusmandatory
RAID Storage System Status.

This is the current status of the RAID Storage System.
This value will be one of the following:

other(1)
Indicates that the agent does not recognize the …
Enumeration
Enumerated Values:
1other
2agentNotRunning
3good
4warning
5communicationLoss
 .1.3.6.1.4.1.232.8.4.1.1.3
cpqSsRaidSystemConditionmandatory
RAID Storage System Condition.

This is the overall condition of the storage system.
The following values are defined:

other(1)
The agent does not recognize the status. You may ne…
Enumeration
Enumerated Values:
1other
2ok
3degraded
4failed
 .1.3.6.1.4.1.232.8.4.1.1.4
cpqSsRaidSystemCntlr1SerialNumbermandatory
RAID Storage System Controller 1 Serial Number.

This is the controller number 1`s serial number which is normally
display on the front panel. This can be used for
identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.4.1.1.5
cpqSsRaidSystemCntlr2SerialNumbermandatory
RAID Storage System Controller 2 Serial Number.

This is the controller number 2`s serial number which is normally
display on the front panel. This can be used for
identification purposes.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.232.8.4.1.1.6