CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

MIB version

Standard view Table view

Tables

Rows

Columns

152

hpSwitchPortTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1 · 1 row entry · 34 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchPortTable'

A table that contains information about the current
port status in this device.

hpSwitchPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1

Information about a specific port status in this
device.

Indexes

hpSwitchPortIndex

Column Syntax OID

hpSwitchPortIndexmandatory

The ifIndex value which uniquely identifies a row in
the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.1

hpSwitchPortTypemandatory

The type of port.

HP-ICF-TCHpSwitchPortType

Type Values:

1	other
2	none
3	unknown
6	ethernetCsmacd
7	iso88023Csmacd
15	fddi
37	atm
54	propMultiplexor
55	ieee80212
62	fastEther
69	fastEtherFX
70	fastEtherFX-sfp
112	tenGSFP-SR
113	tenGSFP-LR
114	tenGSFP-ER
115	tenGSFP-LRM
116	tenGSFP-LX4
117	gigabitEthernetSX
118	gigabitEthernetLX
119	gigabitEthernetT
120	gigabitEthernetStk
121	gigabitEthernetLH
122	tenGbE-CX4
123	gigabitEthernetESP
124	tenGbE-SR
125	tenGbE-ER
126	tenGbE-LR
127	gigabitEthernetT-sfp
128	fastEtherGEN
129	gigabitEthernetGEN
130	tenGbE-GEN
131	fastEtherBX-D
132	fastEtherBX-U
133	gigabitEthernetBX-D
134	gigabitEthernetBX-U
135	tenGbE-LRM
136	sFP-PLUS-SR
137	sFP-PLUS-LR
138	sFP-PLUS-LRM
139	sFP-PLUS-DAC
140	sFP-PLUS-DA1
141	sFP-PLUS-DA2
142	sFP-PLUS-DA3
143	sFP-PLUS-DA5
144	sFP-PLUS-DA7
145	sFP-PLUS-DA10
146	sFP-PLUS-DA15
147	sFP-PLUS-DA20
148	tenGbE-T
149	tenGbE-TSH
150	tenGbE-TLH
151	tenGbE-STK
152	xFP-SFP-PLUS-DAC
153	xFP-SFP-PLUS-DA1
154	xFP-SFP-PLUS-DA3
155	xFP-SFP-PLUS-DA5
156	xFP-SFP-PLUS-DA7
157	xFP-SFP-PLUS-DA10
158	tenGbE-K
160	sFP-PLUS-ER
161	sFP-CWDM1470
162	sFP-CWDM1490
163	sFP-CWDM1510
164	sFP-CWDM1530
165	sFP-CWDM1550
166	sFP-CWDM1570
167	sFP-CWDM1590
168	sFP-CWDM1610
169	tenGigabitEthernetESP
170	fourGbE-GEN
171	fortyGbE-GEN
172	qSFP-PLUS-SR4
173	qSFP-PLUS-eSR4
174	qSFP-PLUS-LR4
175	qSFP-PLUS-DA1
176	qSFP-PLUS-DA3
177	qSFP-PLUS-DA5
178	qSFP-PLUS-SPLIT-sFP-PLUS-DA1
179	qSFP-PLUS-SPLIT-sFP-PLUS-DA3
180	qSFP-PLUS-SPLIT-sFP-PLUS-DA5
181	sFP-PLUS-AO1
182	sFP-PLUS-AO2
183	sFP-PLUS-AO3
184	sFP-PLUS-AO5
185	sFP-PLUS-AO7
186	sFP-PLUS-AO10
187	sFP-PLUS-AO15
188	qSFP-PLUS-AO1
189	qSFP-PLUS-AO2
190	qSFP-PLUS-AO3
191	qSFP-PLUS-AO5
192	qSFP-PLUS-AO7
193	qSFP-PLUS-AO10
194	qSFP-PLUS-AO15
195	qSFP-PLUS-AO20
196	qSFP-PLUS-SPLIT-sFP-PLUS-AO1
197	qSFP-PLUS-SPLIT-sFP-PLUS-AO2
198	qSFP-PLUS-SPLIT-sFP-PLUS-AO3
199	qSFP-PLUS-SPLIT-sFP-PLUS-AO5
200	qSFP-PLUS-SPLIT-sFP-PLUS-AO7
201	qSFP-PLUS-SPLIT-sFP-PLUS-AO10
202	qSFP-PLUS-SPLIT-sFP-PLUS-AO15
203	qSFP-PLUS-BIDI
204	fiveGbE-T

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.2

hpSwitchPortDescrmandatory

A textual string containing information about the
interface.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.3

hpSwitchPortAdminStatusobsolete

The desired state of the interface. This variable is
similar to the ifAdminStatus but instead of keeping
the operational status, this variable maintain the
desired state in the configuration data base.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.4

hpSwitchPortEtherModemandatory

The type of transmission on this port. This
variable is valid only if the hpSwitchPortType
was Ethernet.

Enumerationr/w

Enumerated Values:

1	half-duplex
2	full-duplex

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.5

hpSwitchPortVgModemandatory

The type of transmission on this port. This variable
is valid only if the hpSwitchPortType was VG.

Enumerationr/w

Enumerated Values:

1	main
2	endNode
3	autoDetect

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.6

hpSwitchPortLinkbeatmandatory

The linkbeat status of this port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.7

hpSwitchPortTrunkGroupmandatory

The trunk group this port belong to.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.8

hpSwitchPortBcastLimitmandatory

The percentage of network bandwidth consumed by
broadcast traffic through this port. If the value of
this variable is 0, there will be no broadcast limit.

Integer32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.9

hpSwitchPortFastEtherModemandatory

This object provides the mode of data transfer operation on a port.
The port can transfer the data either in full-duplex or in half-duplex mode.
In full-duplex mode, the port can send and receive the data simultaneousl…

Enumerationr/w

Enumerated Values:

1	half-duplex-10Mbits
2	half-duplex-100Mbits
3	full-duplex-10Mbits
4	full-duplex-100Mbits
5	auto-neg
6	full-duplex-1000Mbits
7	auto-10Mbits
8	auto-100Mbits
9	auto-1000Mbits
10	auto-10Gbits
11	auto-10-100Mbits
12	auto-40Gbits
13	auto-2500Mbits
14	auto-5000Mbits
15	auto-2500-5000Mbits
16	auto-1000-2500Mbits
17	auto-1000-2500-5000Mbits

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.10

hpSwitchPortFlowControlmandatory

The Flow Control of this port.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.11

hpSwitchPortTrunkTypemandatory

Used in conjunction with hpSwitchPortTrunkGroup to
determine what type of trunk and which group it
belongs to. If hpSwitchPortTrunkGroup is set to 0,
trunking is disabled on the port and this variable
becomes a 'don't …

Enumerationr/w

Enumerated Values:

1	trunk
2	fecAuto
3	saTrunk
4	lacpTrk
5	none
6	dtLacpTrk
7	dtTrunk

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.13

hpSwitchPortTrunkLACPStatusmandatory

Used in conjunction with hpSwitchPortTrunkType.
When the trunk is a LACP trunk, this variable defines
its administrative status

Enumerationr/w

Enumerated Values:

1	disabled
2	active
3	passive

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.14

hpSwitchPortMDIXStatusmandatory

Shows the MDI/MDIX setting for an RJ-45 port.
Returns a value of 'not-applicable' for all
ports except RJ-45 ports.

Enumeration

Enumerated Values:

1	not-applicable
2	mdi
3	mdix
4	automdix

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.15

hpSwitchPortAutoMDIXmandatory

Sets the MDI/MDIX value for an RJ-45 port.
Negates need for crossover cables. 'automdix',
'mdi', or 'mdix' may be set when the port
configuration is set to any auto-negotiation mode,
for example 'auto' or 'auto-100', or…

Enumerationr/w

Enumerated Values:

1	not-applicable
2	mdi
3	mdix
4	automdix

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.16

hpSwitchPortLACPKeymandatory

This is the key associated with the port. The user
can configure this key to control the dynamic link
aggregation. The ports with the same key can be
aggregated in the single trunk. The key can also be
configured with d…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17

hpSwitchPortTrafficTemplateNamemandatory

The name of Traffic template that is applied to this
port defining the priority to queue mapping.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.18

hpSwitchPortEEEAdminStatusmandatory

This indicates the Admin status of the port EEE. This
says whether energy-efficient-ethernet is enabled or
disabled on the port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.19

hpSwitchPortEEEOperStatusmandatory

This indicates the current operational status of the port
EEE.
NotSupported indicates that the local PHY do not
have EEE capability.
Active indicates that the port is operating in EEE mode.
Inactive indicates that EEE…

Enumeration

Enumerated Values:

1	notSupported
2	active
3	inactive

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.20

hpSwitchPortEEECurrentTwSysTxobsolete

This indicates the current period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.21

hpSwitchPortEEEMinTwSysTxobsolete

This indicates the minimum period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.22

hpSwitchPortEEEMaxTwSysTxobsolete

This indicates the maximum period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.23

hpSwitchPortPvidmandatory

This indicates the vlan in which the given port
is untagged in.

Integer32

Constraints:
range: 1-4096

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.25

hpSwitchPortTaggedVlanMap1kmandatory

A string of octets containing one bit per VLAN ID in
the range 1 through 1024. The first octet corresponds
to VLAN IDs 1 through 8, the second octet to VLAN IDs
9 through 16, etc. Within each octet, the most
significant…

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.26

hpSwitchPortTaggedVlanMap2kmandatory

A string of octets containing one bit per VLAN ID in
the range 1025 through 2048. The first octet corresponds
to VLAN IDs 1025 through 1032, the second octet to VLAN
IDs 1033 through 1040, etc. Within each octet, the mo…

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.27

hpSwitchPortTaggedVlanMap3kmandatory

A string of octets containing one bit per VLAN ID in
the range 2049 through 3072. The first octet corresponds
to VLAN IDs 2049 through 2056, the second octet to VLAN
IDs 2057 through 2064, etc. Within each octet, the mo…

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.28

hpSwitchPortTaggedVlanMap4kmandatory

A string of octets containing one bit per VLAN ID in
the range 3073 through 4096. The first octet corresponds
to VLAN IDs 3073 through 3080, the second octet to VLAN
IDs 3081 through 3088, etc. Within each octet, the mo…

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.29

hpSwitchPortEEECurrentTwSysTx1mandatory

This indicates the current period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.30

hpSwitchPortEEEMinTwSysTx1mandatory

This indicates the minimum period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.31

hpSwitchPortEEEMaxTwSysTx1mandatory

This indicates the maximum period of time the
system has to wait between a request to transmit
and its readiness to transmit.

microsecondsInteger32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.32

hpSwitchPortPtpAdminStatusmandatory

The administrative status of IEEE 1588 transparent
mode on this port. When enabled, the port will
operate in IEEE 1588 end-to-end transparent mode
where the correction field of PTP packets egressing
this port will be up…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.35

hpSwitchPortPtpOperStatusmandatory

The operational status of IEEE 1588 transparent
mode on this port.

notSupported(1) - indicates the port is not
capable of supporting IEEE 1588

active(2) - indicates IEEE 1588 is enabled…

Enumeration

Enumerated Values:

1	notSupported
2	active
3	inactive

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.36

hpSwitchPortPtpRxCountmandatory

The number of IEEE 1588 PTP Sync and Delay Request
packets received by this port. Packets are counted
even when PTP is administratively disabled on the port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.37

hpSwitchPortPtpTxCountmandatory

The number of IEEE 1588 PTP Sync and Delay Request
packets sent by this port. Packets are counted even
when PTP is administratively disabled on the port.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.38

hpSwitchPortDevTypeTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.4 · 1 row entry · 1 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchPortDevTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchPortDevTypeTable'

A table that contains information about the type of a
device being connected to a port.

hpSwitchPortDevTypeEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.4.1

Information about the type of a device being connected
to a port.

Indexes

hpSwitchPortIndex

Column Syntax OID

hpSwitchPortDevTypeNetworkDevicemandatory

This object marks a port being connected with a network
infra device (switch / AP / router).

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.4.1.2

hpSwitchFilterConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1 · 1 row entry · 8 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchFilterConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchFilterConfigTable'

A table that contains information about the 
traffic filter configuration in this device.

hpSwitchFilterConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1

Information about a traffic filter configuration
in this device.

Indexes

hpSwitchFilterIndex

Column Syntax OID

hpSwitchFilterIndexmandatory

An index that uniquely identifies a traffic filter
for which this entry contains information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.1

hpSwitchFilterTypemandatory

The type of filter.

Enumerationr/w

Enumerated Values:

1	multicast
2	level-3
3	port
4	unicast

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.2

hpSwitchFilterSrcPortmandatory

This variable is required when a port filter or
unicast filter was configured. It will be ignored
otherwise.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.3

hpSwitchFilterMacAddrmandatory

This variable is valid only if a unicast or
multicast filter was defined. It will be ignored
otherwise.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.4

hpSwitchFilterProtocolTypemandatory

This variable is valid only if a level-3 filter
was defined. It will be ignored otherwise. This
variable will contain either a etherType (DIX
Ethernet) or SAP(IEEE 802) value of the level-3
protocol.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.5

hpSwitchFilterPortMaskmandatory

This variable specifies a group of ports whose
traffic will be filtered. Each octet within the value
of this object specifies a set of eight ports, with
the first octet specifying ports 1 through 8, the
second octet spe…

OctetStringr/w

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.6

hpSwitchFilterEntryStatusmandatory

The status of a filter entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.7

hpSwitchFilterNamemandatory

This variable applies only when 'hpSwitchFilterType' is
port. This variable specifies the filter name and can
only be specified for named filters.
Filter name can be upto 20 characters long and cannot
contain tilde (…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.8

hpSwitchFddiIpFragConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1 · 1 row entry · 2 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchFddiIpFragConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchFddiIpFragConfigTable'

A list of IP fragmentation configuration 
parameters for the FDDI cards in the switch.

hpSwitchFddiIpFragConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1

An Fddi IP fragmentation entry which is
containing configurable options for the FDDI
cards in the switch.

Indexes

hpSwitchFddiIpFragConfigIndex

Column Syntax OID

hpSwitchFddiIpFragConfigIndexmandatory

A unique value for each FDDI Card.
The value for each FDDI card must remain constant
at least from one re-initialization of the entity's
network management system to the next
re-initialization.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.1

hpSwitchFddiIpFragConfigStatusmandatory

The operational status of FDDI IP fragmentation
for each FDDI card.
enable(1): FDDI card will fragment all packets which
are bigger than the Ethernet packet size
limitation, 1518 Bytes.
disable(2): FDD…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2

hpSwitchABCConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchABCConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchABCConfigTable'

A list of Automatic Broadcast Control (ABC
disable/enable entries for each VLAN on the switch.

hpSwitchABCConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1

Contains the ABC status for each VLAN on the switch,
including IP RIP control and IPX RIP/SAP control.

Indexes

hpSwitchABCConfigVlan

Column Syntax OID

hpSwitchABCConfigVlanmandatory

The user is able to enable/disable ABC on a per VLAN
basis, so the VLAN serves as an index into the ABC
configuration table.

VlanID

Type Constraints:
range: 1..65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.1

hpSwitchABCConfigControlmandatory

ABC control is either IP&IPX or IP or IPX or disabled
for each VLAN on the switch.

Enumerationr/w

Enumerated Values:

1	ipipx
2	ip
3	ipx
4	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.2

hpSwitchABCConfigIpRipControlmandatory

IP RIP control. If this feature is enabled then IP
RIP packets will only be forwarded on ports, within
its VLAN domain, that have heard RIPs before. If
this feature is disabled then IP RIP packets seen by
a given port …

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.3

hpSwitchABCConfigIpxRipSapControlmandatory

IPX RIP/SAP control. If this feature is enabled then
IPX RIP/SAP packets will only be forwarded on ports,
within its VLAN domain, that have previously seen
RIP/SAP packets. If this feature is disabled then
IPX RIP and…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.4

hpSwitchABCConfigVlanBcastLimitmandatory

The percentage of network bandwidth consumed by
broadcast traffic through VLAN. If the value of this
variable is 0, there will be no broadcast limit. There
is a default value chosen when ABC is enabled.

Integer32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.5

hpSwitchABCConfigAutoGatewayConfigmandatory

If this feature is enabled then DHCP packets both
ucast and bcast with UDP destination port 68 will be
intercepted. DHCP packets with the router option in
the options field in the DHCP message will be
modified so that …

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.7

hpSwitchStpVlanTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchStpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchStpVlanTable'

A table that contains vlan-specific information
for the Spanning Tree Protocol.

hpSwitchStpVlanEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

hpSwitchStpVlan

Column Syntax OID

hpSwitchStpVlanmandatory

The VLAN ID for which this entry contains STP
configuration.

VlanID

Type Constraints:
range: 1..65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.1

hpSwitchStpAdminStatusmandatory

The admin status of the spanning tree
protocol.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.2

hpSwitchStpPrioritymandatory

The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.3

hpSwitchStpMaxAgemandatory

The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.

Timeoutr/w

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.4

hpSwitchStpHelloTimemandatory

The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…

Timeoutr/w

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.5

hpSwitchStpForwardDelaymandatory

This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…

Timeoutr/w

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.6

hpSwitchStpPortTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2 · 1 row entry · 11 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchStpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchStpPortTable'

A table that contains port-specific information
for the Spanning Tree Protocol.

hpSwitchStpPortEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

hpSwitchStpPort

Column Syntax OID

hpSwitchStpPortmandatory

The port number of the port for which this entry
contains Spanning Tree Protocol management
information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.1

hpSwitchStpPortTypemandatory

The type of port.

HP-ICF-TCHpSwitchPortType

Type Values:

1	other
2	none
3	unknown
6	ethernetCsmacd
7	iso88023Csmacd
15	fddi
37	atm
54	propMultiplexor
55	ieee80212
62	fastEther
69	fastEtherFX
70	fastEtherFX-sfp
112	tenGSFP-SR
113	tenGSFP-LR
114	tenGSFP-ER
115	tenGSFP-LRM
116	tenGSFP-LX4
117	gigabitEthernetSX
118	gigabitEthernetLX
119	gigabitEthernetT
120	gigabitEthernetStk
121	gigabitEthernetLH
122	tenGbE-CX4
123	gigabitEthernetESP
124	tenGbE-SR
125	tenGbE-ER
126	tenGbE-LR
127	gigabitEthernetT-sfp
128	fastEtherGEN
129	gigabitEthernetGEN
130	tenGbE-GEN
131	fastEtherBX-D
132	fastEtherBX-U
133	gigabitEthernetBX-D
134	gigabitEthernetBX-U
135	tenGbE-LRM
136	sFP-PLUS-SR
137	sFP-PLUS-LR
138	sFP-PLUS-LRM
139	sFP-PLUS-DAC
140	sFP-PLUS-DA1
141	sFP-PLUS-DA2
142	sFP-PLUS-DA3
143	sFP-PLUS-DA5
144	sFP-PLUS-DA7
145	sFP-PLUS-DA10
146	sFP-PLUS-DA15
147	sFP-PLUS-DA20
148	tenGbE-T
149	tenGbE-TSH
150	tenGbE-TLH
151	tenGbE-STK
152	xFP-SFP-PLUS-DAC
153	xFP-SFP-PLUS-DA1
154	xFP-SFP-PLUS-DA3
155	xFP-SFP-PLUS-DA5
156	xFP-SFP-PLUS-DA7
157	xFP-SFP-PLUS-DA10
158	tenGbE-K
160	sFP-PLUS-ER
161	sFP-CWDM1470
162	sFP-CWDM1490
163	sFP-CWDM1510
164	sFP-CWDM1530
165	sFP-CWDM1550
166	sFP-CWDM1570
167	sFP-CWDM1590
168	sFP-CWDM1610
169	tenGigabitEthernetESP
170	fourGbE-GEN
171	fortyGbE-GEN
172	qSFP-PLUS-SR4
173	qSFP-PLUS-eSR4
174	qSFP-PLUS-LR4
175	qSFP-PLUS-DA1
176	qSFP-PLUS-DA3
177	qSFP-PLUS-DA5
178	qSFP-PLUS-SPLIT-sFP-PLUS-DA1
179	qSFP-PLUS-SPLIT-sFP-PLUS-DA3
180	qSFP-PLUS-SPLIT-sFP-PLUS-DA5
181	sFP-PLUS-AO1
182	sFP-PLUS-AO2
183	sFP-PLUS-AO3
184	sFP-PLUS-AO5
185	sFP-PLUS-AO7
186	sFP-PLUS-AO10
187	sFP-PLUS-AO15
188	qSFP-PLUS-AO1
189	qSFP-PLUS-AO2
190	qSFP-PLUS-AO3
191	qSFP-PLUS-AO5
192	qSFP-PLUS-AO7
193	qSFP-PLUS-AO10
194	qSFP-PLUS-AO15
195	qSFP-PLUS-AO20
196	qSFP-PLUS-SPLIT-sFP-PLUS-AO1
197	qSFP-PLUS-SPLIT-sFP-PLUS-AO2
198	qSFP-PLUS-SPLIT-sFP-PLUS-AO3
199	qSFP-PLUS-SPLIT-sFP-PLUS-AO5
200	qSFP-PLUS-SPLIT-sFP-PLUS-AO7
201	qSFP-PLUS-SPLIT-sFP-PLUS-AO10
202	qSFP-PLUS-SPLIT-sFP-PLUS-AO15
203	qSFP-PLUS-BIDI
204	fiveGbE-T

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.2

hpSwitchStpPortSrcMacmandatory

The source MAC address used by the spanning
tree protocol.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.3

hpSwitchStpPortPrioritymandatory

The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.4

hpSwitchStpPortPathCostmandatory

The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.5

hpSwitchStpPortModemandatory

If the value of this variable is set to fast(2), the
port will go directly into the Forwarding State when a
device is connected to it. Use this feature only on
ports that are connected to an individual PC or
Workstatio…

Enumerationr/w

Enumerated Values:

1	normal
2	fast
3	uplink

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.6

hpSwitchStpPortBpduFilteroptional

Setting True will cause port to ignore ingress BPDUs
and not generate egress BPDUs, as the result the port
will stay in forwarding state. Default is False.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.7

hpSwitchStpPortBpduProtectionoptional

Setting True indicates that no BPDUs are expected to
be received on this port. At the reception of BPDUs
the BPDU protection mechanism will disable this port
and port will transition into bpduError state.
Default is F…

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.8

hpSwitchStpPortErrantBpduCounteroptional

Counts the number of BPDUs that were not expected
to be received on this port. This counter gets
incremented only if hpSwitchStpPortBpduProtection,
hpSwitchStpPortBpduFilter, hpSwitchStpPortPvstFilter,
or hpSwitchStpP…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.9

hpSwitchStpPortPvstFilteroptional

Setting True will cause the port to ignore incoming
PVST BPDUs.
Default is False.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.10

hpSwitchStpPortPvstProtectionoptional

Setting True indicates that any PVST BPDUs arriving
on this port should be discarded and that this will
cause the port to be disabled. The port will remain
disabled for the time period indicated by
hpSwitchStpBpduProte…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.11

hpSwitchIgmpConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchIgmpConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchIgmpConfigTable'

A table that contains information about the IGMP
Querier capacity or High Priority Forward
configuration on any given vlan on the switch.

hpSwitchIgmpConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1

Information about the IGMP Querier feature associated
with a specific virtual LAN in this device.

Indexes

hpSwitchIgmpVlanIndex

Column Syntax OID

hpSwitchIgmpVlanIndexmandatory

An index that uniquely identifies the IGMP
configuration of a virtual LAN for which this entry
contains information.

VlanID

Type Constraints:
range: 1..65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.1

hpSwitchIgmpStatemandatory

The operational status of the IGMP support for
this virtual LAN.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.2

hpSwitchIgmpQuerierStatemandatory

The operational status of the IGMP Querier
functionality for this virtual LAN.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.3

hpSwitchIgmpPriorityStateobsolete

The operational status of the IGMP Forward with High
Priority mode for this virtual LAN. This feature is now
deprecated since the functionality is not supported by
IGMP.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.4

hpSwitchIgmpQuerierIntervalmandatory

The time (in seconds) to wait between Querier
election cycles for this virtual LAN.

Integer32r/w

Constraints:
range: 5-300

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.5

hpSwitchIgmpProxyDomainMapmandatory

Denotes the IGMP proxy domains that are associated with
this VLAN. Only IGMP proxy domains that already exist
can be associated.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.6

hpSwitchIgmpPortConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchIgmpPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchIgmpPortConfigTable'

A table that contains information about the IGMP port
configurations on this switch.

hpSwitchIgmpPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1

The information associated with each IGMP port
configuration.

Indexes

hpSwitchIgmpPortIndex

Column Syntax OID

hpSwitchIgmpPortIndexmandatory

The ifIndex value which uniquely identifies a row in
the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.1

hpSwitchIgmpPortTypemandatory

The type of port.

HP-ICF-TCHpSwitchPortType

Type Values:

1	other
2	none
3	unknown
6	ethernetCsmacd
7	iso88023Csmacd
15	fddi
37	atm
54	propMultiplexor
55	ieee80212
62	fastEther
69	fastEtherFX
70	fastEtherFX-sfp
112	tenGSFP-SR
113	tenGSFP-LR
114	tenGSFP-ER
115	tenGSFP-LRM
116	tenGSFP-LX4
117	gigabitEthernetSX
118	gigabitEthernetLX
119	gigabitEthernetT
120	gigabitEthernetStk
121	gigabitEthernetLH
122	tenGbE-CX4
123	gigabitEthernetESP
124	tenGbE-SR
125	tenGbE-ER
126	tenGbE-LR
127	gigabitEthernetT-sfp
128	fastEtherGEN
129	gigabitEthernetGEN
130	tenGbE-GEN
131	fastEtherBX-D
132	fastEtherBX-U
133	gigabitEthernetBX-D
134	gigabitEthernetBX-U
135	tenGbE-LRM
136	sFP-PLUS-SR
137	sFP-PLUS-LR
138	sFP-PLUS-LRM
139	sFP-PLUS-DAC
140	sFP-PLUS-DA1
141	sFP-PLUS-DA2
142	sFP-PLUS-DA3
143	sFP-PLUS-DA5
144	sFP-PLUS-DA7
145	sFP-PLUS-DA10
146	sFP-PLUS-DA15
147	sFP-PLUS-DA20
148	tenGbE-T
149	tenGbE-TSH
150	tenGbE-TLH
151	tenGbE-STK
152	xFP-SFP-PLUS-DAC
153	xFP-SFP-PLUS-DA1
154	xFP-SFP-PLUS-DA3
155	xFP-SFP-PLUS-DA5
156	xFP-SFP-PLUS-DA7
157	xFP-SFP-PLUS-DA10
158	tenGbE-K
160	sFP-PLUS-ER
161	sFP-CWDM1470
162	sFP-CWDM1490
163	sFP-CWDM1510
164	sFP-CWDM1530
165	sFP-CWDM1550
166	sFP-CWDM1570
167	sFP-CWDM1590
168	sFP-CWDM1610
169	tenGigabitEthernetESP
170	fourGbE-GEN
171	fortyGbE-GEN
172	qSFP-PLUS-SR4
173	qSFP-PLUS-eSR4
174	qSFP-PLUS-LR4
175	qSFP-PLUS-DA1
176	qSFP-PLUS-DA3
177	qSFP-PLUS-DA5
178	qSFP-PLUS-SPLIT-sFP-PLUS-DA1
179	qSFP-PLUS-SPLIT-sFP-PLUS-DA3
180	qSFP-PLUS-SPLIT-sFP-PLUS-DA5
181	sFP-PLUS-AO1
182	sFP-PLUS-AO2
183	sFP-PLUS-AO3
184	sFP-PLUS-AO5
185	sFP-PLUS-AO7
186	sFP-PLUS-AO10
187	sFP-PLUS-AO15
188	qSFP-PLUS-AO1
189	qSFP-PLUS-AO2
190	qSFP-PLUS-AO3
191	qSFP-PLUS-AO5
192	qSFP-PLUS-AO7
193	qSFP-PLUS-AO10
194	qSFP-PLUS-AO15
195	qSFP-PLUS-AO20
196	qSFP-PLUS-SPLIT-sFP-PLUS-AO1
197	qSFP-PLUS-SPLIT-sFP-PLUS-AO2
198	qSFP-PLUS-SPLIT-sFP-PLUS-AO3
199	qSFP-PLUS-SPLIT-sFP-PLUS-AO5
200	qSFP-PLUS-SPLIT-sFP-PLUS-AO7
201	qSFP-PLUS-SPLIT-sFP-PLUS-AO10
202	qSFP-PLUS-SPLIT-sFP-PLUS-AO15
203	qSFP-PLUS-BIDI
204	fiveGbE-T

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.2

hpSwitchIgmpIpMcastStatemandatory

The operational status of the IGMP feature for this
port or trunk. 1 implies that all IP Multicast
traffic will be monitored on the port, 2 implies that
IP Multicast traffic will be dropped on the port, and
3 implies t…

Enumerationr/w

Enumerated Values:

1	auto
2	blocked
3	forward

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.3

hpSwitchIgmpPortConfigTable2

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchIgmpPortConfigTable2

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchIgmpPortConfigTable2'

A table that contains information about the IGMP port
configurations on this switch.  This table supersedes
hpSwitchIgmpPortConfigTable for products which support
multiple VLANs on each port.

hpSwitchIgmpPortConfigEntry2 row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1

The information associated with each IGMP port
configuration.

Indexes

hpSwitchIgmpPortVlanIndex2 hpSwitchIgmpPortIndex2

Column Syntax OID

hpSwitchIgmpPortVlanIndex2mandatory

The Vlan Index value which uniquely identifies a row
in the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.1

hpSwitchIgmpPortIndex2mandatory

The ifIndex value which uniquely identifies a row in
the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.2

hpSwitchIgmpPortType2mandatory

The type of port.

HP-ICF-TCHpSwitchPortType

Type Values:

1	other
2	none
3	unknown
6	ethernetCsmacd
7	iso88023Csmacd
15	fddi
37	atm
54	propMultiplexor
55	ieee80212
62	fastEther
69	fastEtherFX
70	fastEtherFX-sfp
112	tenGSFP-SR
113	tenGSFP-LR
114	tenGSFP-ER
115	tenGSFP-LRM
116	tenGSFP-LX4
117	gigabitEthernetSX
118	gigabitEthernetLX
119	gigabitEthernetT
120	gigabitEthernetStk
121	gigabitEthernetLH
122	tenGbE-CX4
123	gigabitEthernetESP
124	tenGbE-SR
125	tenGbE-ER
126	tenGbE-LR
127	gigabitEthernetT-sfp
128	fastEtherGEN
129	gigabitEthernetGEN
130	tenGbE-GEN
131	fastEtherBX-D
132	fastEtherBX-U
133	gigabitEthernetBX-D
134	gigabitEthernetBX-U
135	tenGbE-LRM
136	sFP-PLUS-SR
137	sFP-PLUS-LR
138	sFP-PLUS-LRM
139	sFP-PLUS-DAC
140	sFP-PLUS-DA1
141	sFP-PLUS-DA2
142	sFP-PLUS-DA3
143	sFP-PLUS-DA5
144	sFP-PLUS-DA7
145	sFP-PLUS-DA10
146	sFP-PLUS-DA15
147	sFP-PLUS-DA20
148	tenGbE-T
149	tenGbE-TSH
150	tenGbE-TLH
151	tenGbE-STK
152	xFP-SFP-PLUS-DAC
153	xFP-SFP-PLUS-DA1
154	xFP-SFP-PLUS-DA3
155	xFP-SFP-PLUS-DA5
156	xFP-SFP-PLUS-DA7
157	xFP-SFP-PLUS-DA10
158	tenGbE-K
160	sFP-PLUS-ER
161	sFP-CWDM1470
162	sFP-CWDM1490
163	sFP-CWDM1510
164	sFP-CWDM1530
165	sFP-CWDM1550
166	sFP-CWDM1570
167	sFP-CWDM1590
168	sFP-CWDM1610
169	tenGigabitEthernetESP
170	fourGbE-GEN
171	fortyGbE-GEN
172	qSFP-PLUS-SR4
173	qSFP-PLUS-eSR4
174	qSFP-PLUS-LR4
175	qSFP-PLUS-DA1
176	qSFP-PLUS-DA3
177	qSFP-PLUS-DA5
178	qSFP-PLUS-SPLIT-sFP-PLUS-DA1
179	qSFP-PLUS-SPLIT-sFP-PLUS-DA3
180	qSFP-PLUS-SPLIT-sFP-PLUS-DA5
181	sFP-PLUS-AO1
182	sFP-PLUS-AO2
183	sFP-PLUS-AO3
184	sFP-PLUS-AO5
185	sFP-PLUS-AO7
186	sFP-PLUS-AO10
187	sFP-PLUS-AO15
188	qSFP-PLUS-AO1
189	qSFP-PLUS-AO2
190	qSFP-PLUS-AO3
191	qSFP-PLUS-AO5
192	qSFP-PLUS-AO7
193	qSFP-PLUS-AO10
194	qSFP-PLUS-AO15
195	qSFP-PLUS-AO20
196	qSFP-PLUS-SPLIT-sFP-PLUS-AO1
197	qSFP-PLUS-SPLIT-sFP-PLUS-AO2
198	qSFP-PLUS-SPLIT-sFP-PLUS-AO3
199	qSFP-PLUS-SPLIT-sFP-PLUS-AO5
200	qSFP-PLUS-SPLIT-sFP-PLUS-AO7
201	qSFP-PLUS-SPLIT-sFP-PLUS-AO10
202	qSFP-PLUS-SPLIT-sFP-PLUS-AO15
203	qSFP-PLUS-BIDI
204	fiveGbE-T

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.3

hpSwitchIgmpIpMcastState2mandatory

The operational status of the IGMP feature for this
port or trunk. 1 implies that all IP Multicast traffic
will be monitored on the port, 2 implies that
IP Multicast traffic will be dropped on the port, and
3 implies t…

Enumerationr/w

Enumerated Values:

1	auto
2	blocked
3	forward

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.4

hpSwitchIgmpPortForcedLeaveStatemandatory

The operational status of the IGMP feature for this
port or trunk indicates whether any IGMP V2 Leaves
received for an IP Multicast group will cause the
group to be deleted after the
hpSwitchIgmpForcedLeaveInterval if n…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.5

hpSwitchIgmpPortFastLeaveStatemandatory

The operational status of the IGMP feature for this
port or trunk indicates whether any IGMP V2 Leaves
received for an IP Multicast group will cause the
group to be deleted immediately on single-
connection ports. Norm…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.6

hpSwitchCosPortConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosPortConfigTable'

A table that contains information about the CoS port
configurations on this switch.

hpSwitchCosPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1

The information associated with each CoS port
configuration.

Indexes

hpSwitchCosPortIndex

Column Syntax OID

hpSwitchCosPortIndexmandatory

The ifIndex value which uniquely identifies a row
in the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.1

hpSwitchCosPortTypeobsolete

The type of port.

HP-ICF-TCHpSwitchPortType

Type Values:

1	other
2	none
3	unknown
6	ethernetCsmacd
7	iso88023Csmacd
15	fddi
37	atm
54	propMultiplexor
55	ieee80212
62	fastEther
69	fastEtherFX
70	fastEtherFX-sfp
112	tenGSFP-SR
113	tenGSFP-LR
114	tenGSFP-ER
115	tenGSFP-LRM
116	tenGSFP-LX4
117	gigabitEthernetSX
118	gigabitEthernetLX
119	gigabitEthernetT
120	gigabitEthernetStk
121	gigabitEthernetLH
122	tenGbE-CX4
123	gigabitEthernetESP
124	tenGbE-SR
125	tenGbE-ER
126	tenGbE-LR
127	gigabitEthernetT-sfp
128	fastEtherGEN
129	gigabitEthernetGEN
130	tenGbE-GEN
131	fastEtherBX-D
132	fastEtherBX-U
133	gigabitEthernetBX-D
134	gigabitEthernetBX-U
135	tenGbE-LRM
136	sFP-PLUS-SR
137	sFP-PLUS-LR
138	sFP-PLUS-LRM
139	sFP-PLUS-DAC
140	sFP-PLUS-DA1
141	sFP-PLUS-DA2
142	sFP-PLUS-DA3
143	sFP-PLUS-DA5
144	sFP-PLUS-DA7
145	sFP-PLUS-DA10
146	sFP-PLUS-DA15
147	sFP-PLUS-DA20
148	tenGbE-T
149	tenGbE-TSH
150	tenGbE-TLH
151	tenGbE-STK
152	xFP-SFP-PLUS-DAC
153	xFP-SFP-PLUS-DA1
154	xFP-SFP-PLUS-DA3
155	xFP-SFP-PLUS-DA5
156	xFP-SFP-PLUS-DA7
157	xFP-SFP-PLUS-DA10
158	tenGbE-K
160	sFP-PLUS-ER
161	sFP-CWDM1470
162	sFP-CWDM1490
163	sFP-CWDM1510
164	sFP-CWDM1530
165	sFP-CWDM1550
166	sFP-CWDM1570
167	sFP-CWDM1590
168	sFP-CWDM1610
169	tenGigabitEthernetESP
170	fourGbE-GEN
171	fortyGbE-GEN
172	qSFP-PLUS-SR4
173	qSFP-PLUS-eSR4
174	qSFP-PLUS-LR4
175	qSFP-PLUS-DA1
176	qSFP-PLUS-DA3
177	qSFP-PLUS-DA5
178	qSFP-PLUS-SPLIT-sFP-PLUS-DA1
179	qSFP-PLUS-SPLIT-sFP-PLUS-DA3
180	qSFP-PLUS-SPLIT-sFP-PLUS-DA5
181	sFP-PLUS-AO1
182	sFP-PLUS-AO2
183	sFP-PLUS-AO3
184	sFP-PLUS-AO5
185	sFP-PLUS-AO7
186	sFP-PLUS-AO10
187	sFP-PLUS-AO15
188	qSFP-PLUS-AO1
189	qSFP-PLUS-AO2
190	qSFP-PLUS-AO3
191	qSFP-PLUS-AO5
192	qSFP-PLUS-AO7
193	qSFP-PLUS-AO10
194	qSFP-PLUS-AO15
195	qSFP-PLUS-AO20
196	qSFP-PLUS-SPLIT-sFP-PLUS-AO1
197	qSFP-PLUS-SPLIT-sFP-PLUS-AO2
198	qSFP-PLUS-SPLIT-sFP-PLUS-AO3
199	qSFP-PLUS-SPLIT-sFP-PLUS-AO5
200	qSFP-PLUS-SPLIT-sFP-PLUS-AO7
201	qSFP-PLUS-SPLIT-sFP-PLUS-AO10
202	qSFP-PLUS-SPLIT-sFP-PLUS-AO15
203	qSFP-PLUS-BIDI
204	fiveGbE-T

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.2

hpSwitchCosPortPrioritymandatory

The 802.1p priority value to assign to packets
received on the specified port. This value will be
inserted in the 802.1Q tag and the packet will be
placed in the appropriate outbound port queue. The
value of 255 is us…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.3

hpSwitchCosPortDSCPPolicymandatory

The DSCP Policy to assign to packets received on
the specified Port. This is an index into the
hpSwitchCosDSCPPolicy table, or the value 255
indicating no DSCP Policy exists. This policy is
associated with an 802.1p …

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.4

hpSwitchCosPortResolvedPrioritymandatory

The 802.1p priority that will be applied to packets
received on the specified port. This value
represents the actual operating value for this CoS
port entry. A value of 255 represents no override
of the incoming priori…

Integer32

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.5

hpSwitchCosPortApplyPolicymandatory

This object determines which configuration policy,
noPolicyOverride, hpSwitchCosPortPriority or
hpSwitchCosPortDSCPPolicy, applies for the given
Port CoS entry. These configuration policies are
mutually exclusive of o…

Enumerationr/w

Enumerated Values:

1	noPolicyOverride
2	applyHpSwitchCosPortPriority
3	applyHpSwitchCosPortDSCPPolicy

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.6

hpSwitchCosPortTrustModemandatory

This object determines which trust mode,
trustNone, trust802.1pCos, trustTosIpPrecedence,
trustTosDffserv, trustAll or trustPartnerDevice
applies for the given Port CoS entry.
When the trust-mode is anything other…

Enumerationr/w

Enumerated Values:

1	trustNone
2	trust8021pCos
3	trustTosIpPrecedence
4	trustTosDiffserv
5	trustAll
6	trustPartnerDevice

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.7

hpSwitchCosPortPartnerDevicemandatory

This object lists the device-types for which DSCP
priority is trusted when hpSwitchCosPortTrustMode is set
to trustPartnerDevice.

HP-ICF-DEV-CONF-MIBHpPartnerDeviceTypeListr/w

Type Values:

0	reserved
1	none
2	arubaAccessPoint
3	arubaBridgeRouter
4	hpBridgeRouter
5	ciscoBridgeRouter
6	ciscoPhone
7	scsWanCpe
8	deviceIdentity

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.8

hpSwitchCosPortTrustedPartnerStatemandatory

This object is set to 'trusted' when an approved device
is detected. The default value is 'untrusted'.

Enumeration

Enumerated Values:

1	untrusted
2	trusted

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.9

hpSwitchCosVlanConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosVlanConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosVlanConfigTable'

A table that contains information about the CoS Vlan
configurations on this switch.

hpSwitchCosVlanConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1

The information associated with each CoS Vlan
configuration.

Indexes

hpSwitchCosVlanIndex

Column Syntax OID

hpSwitchCosVlanIndexmandatory

The index that uniquely identifies the CoS
configuration of a virtual LAN for which this entry
contains information.

VlanID

Type Constraints:
range: 1..65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.1

hpSwitchCosVlanPrioritymandatory

The 802.1p priority value to assign to packets
received on the specified Vlan. This value will be
inserted in the 802.1Q tag and the packet will be
placed in the appropriate outbound port queue. The
value of 255 is us…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.2

hpSwitchCosVlanDSCPPolicymandatory

The DSCP Policy to assign to packets received on
the specified Vlan. This is an index into the
hpSwitchCosDSCPPolicy table, or the value 255
indicating no DSCP Policy exists. This policy is
associated with an 802.1p pr…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.3

hpSwitchCosVlanResolvedPrioritymandatory

The 802.1p priority that will be applied to
packets received on the specified VLAN. This value
represents the actual operating value for this CoS
vlan entry. A value of 255 represents no override of
the incoming priori…

Integer32

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.4

hpSwitchCosVlanApplyPolicymandatory

This object determines which configuration policy,
noPolicyOverride, hpSwitchCosVlanPriority or
hpSwitchCosDSCPPolicy, applies for this given Vlan
CoS entry. These configuration policies are mutually
exclusive of one a…

Enumerationr/w

Enumerated Values:

1	noPolicyOverride
2	applyHpSwitchCosVlanPriority
3	applyHpSwitchCosVlanDSCPPolicy

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.5

hpSwitchCosProtocolConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3 · 1 row entry · 2 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosProtocolConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosProtocolConfigTable'

A table that contains information about the CoS
protocol type configurations on this switch.

hpSwitchCosProtocolConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1

The information associated with each CoS protocol
configuration.

Indexes

hpSwitchCosProtocolType

Column Syntax OID

hpSwitchCosProtocolTypemandatory

Packets with this protocol type will receive the new
priority value.

Enumeration

Enumerated Values:

1	ip
2	ipx
3	arp
4	decnet
5	appletalk
6	sna
7	netbios

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1.1

hpSwitchCosProtocolPrioritymandatory

The 802.1p priority value to assign to packets
received for the specified protocol. This value will
be inserted in the 802.1Q tag and the packet will be
placed in the appropriate outbound port queue. The
value of 255 …

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1.2

hpSwitchCosAddressConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4 · 1 row entry · 11 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosAddressConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosAddressConfigTable'

A table that contains information about the CoS
address configurations on this switch.

hpSwitchCosAddressConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1

The information associated with each CoS address
configuration.

Indexes

hpSwitchCosAddressIndex

Column Syntax OID

hpSwitchCosAddressIndexmandatory

The index that uniquely identifies the CoS
configuration for an address for which this entry
contains information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.1

hpSwitchCosAddressTypemandatory

The type of address to configure. Default is ip
(IPv4). This field indicates which of the other
address fields must be configured for this table
entry.

Enumerationr/w

Enumerated Values:

1	ip
2	ipv6

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.2

hpSwitchCosAddressIpmandatory

This variable is valid only if an IPv4 CoS
configuration was defined. It will be ignored
otherwise. Packets with this IPv4 address as a source
or destination will receive the new priority value.

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.3

hpSwitchCosAddressPrioritymandatory

The 802.1p priority value to assign to packets
received for the specified address. This value will
be inserted in the 802.1Q tag and the packet will be
placed in the appropriate outbound port queue.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.4

hpSwitchCosAddressStatusmandatory

The status of a Cos Address entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.5

hpSwitchCosAddressDSCPPolicymandatory

The DSCP Policy to assign to packets received for
the specified address. This is an index into the
hpSwitchCosDSCPPolicy table, or the value 255
indicating no DSCP Policy exists. This policy is
associated with an 802.1p…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.6

hpSwitchCosAddressResolvedPrioritymandatory

The 802.1p priority that will be applied to packets
received for the specified address. This value
represents the actual operating value for this given
address entry. A value of 255 represents no override.

Integer32

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.7

hpSwitchCosAddressApplyPolicymandatory

This object determines which configuration policy,
hpSwitchCosAddressPriority or hpSwitchCosDSCPPolicy,
applies for the given Address CoS entry. These
configuration policies are mutually exclusive of
one another.

Enumerationr/w

Enumerated Values:

1	applyHpSwitchCosAddressPriority
2	applyHpSwitchCosAddressDSCPPolicy

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.8

hpSwitchCosIpv4AddressMaskmandatory

This value is applied as a direct IPv4-address mask
when an IPv4 CoS configuration is defined for this
table entry. It will be ignored otherwise. The
default mask value is 255.255.255.255, which
specifies the exact…

RFC1155-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.9

hpSwitchCosAddressIpv6mandatory

This variable is valid only if an IPv6 CoS
configuration was defined. It will be ignored
otherwise. Packets with this IPv6 address as a source
or destination will receive the new priority value.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.10

hpSwitchCosAddressIpv6PrefixLengthmandatory

The prefix length associated with the
hpSwitchCosAddressIpv6 object, if an IPv6 CoS
configuration is valid and hpSwitchCosAddressType is
type ipv6. This variable will otherwise be ignored.
The prefix length for an IP…

INET-ADDRESS-MIBInetAddressPrefixLengthr/w

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.11

hpSwitchCosTosConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosTosConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosTosConfigTable'

A table that contains information about the CoS Type
of Service configurations on this switch.  This table
is used only when the hpSwitchCosTosConfigMode is set
to diffserv.

hpSwitchCosTosConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1

The information associated with each CoS TOS
configuration.

Indexes

hpSwitchCosTosIndex

Column Syntax OID

hpSwitchCosTosIndexmandatory

Packets with this value in the upper bits of the Type
of Service field of the IP protocol header will receive
the new priority value. For Differentiated Services
the upper 6 bits of the TOS field are used.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.1

hpSwitchCosTosPriorityobsolete

The 802.1p priority value to assign to packets
received for the specified TOS. This value will be
inserted in the 802.1Q tag and the packet will be
placed in the appropriate outbound port queue. The
value of 255 is us…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.2

hpSwitchCosTosDSCPPolicymandatory

The DSCP Policy to assign to packets received for
the specified ToS codepoint. This is an index
into the hpSwitchCosDSCPPolicy table, or the value
255 indicating no DSCP Policy exists. The DSCP
policy is associated …

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.3

hpSwitchCosTosResolvedPrioritymandatory

The 802.1p priority that will be applied to
packets received for the specified ToS. This
value represents the actual operating value for
this given ToS entry. A value of 255 represents no
override of the incoming prior…

Integer32

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.4

hpSwitchCosTosApplyPolicymandatory

This object determines which configuration policy,
applyInheritedPriority or hpSwitchCosTosDSCPPolicy,
applies for the given Tos CoS entry.

Enumerationr/w

Enumerated Values:

1	applyInheritedPriority
2	applyHpSwitchCosTosDSCPPolicy

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.5

hpSwitchCosDSCPPolicyConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosDSCPPolicyConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosDSCPPolicyConfigTable'

A table that contains information about the
priority applied to each of the Differentiated
Services Code Points.

hpSwitchCosDSCPPolicyConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1

A list of objects describing a DiffServe Codepoint
(DSCP), and the 802.1p priority to apply for that
DSCP.

Indexes

hpSwitchCosDSCPPolicyIndex

Column	Syntax	OID
hpSwitchCosDSCPPolicyIndexmandatory An index to uniquely identify each row in the hpSwitchCosDSCPPolicyConfigTable.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.1`
hpSwitchCosDSCPPolicyPrioritymandatory The 802.1p priority value to assign to packets with a given DSCP. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicat…	Integer32r/w Constraints: `range: 0-7` `range: 255-255`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.2`
hpSwitchCosDSCPPolicyNamemandatory A user settable name describing a DSCP policy table entry.	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.3`

hpSwitchCosAppTypeConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7 · 1 row entry · 12 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchCosAppTypeConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchCosAppTypeConfigTable'

A table that contains information about the CoS
Application type configurations on the switch.  An
application is determined by its network source
and/or destination port number.

hpSwitchCosAppTypeConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1

An entry in the switch
hpSwitchCosAppTypeConfigEntry Table.

Indexes

hpSwitchCosAppTypeConfigIndex

Column Syntax OID

hpSwitchCosAppTypeConfigIndexmandatory

An index to uniquely identify this
hpSwitchCosAppType row.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.1

hpSwitchCosAppTypeConfigTypemandatory

This signifies which network port number to apply
to the given CoS Application policy.

Enumerationr/w

Enumerated Values:

1	udpSrcPortConfig
2	udpDestPortConfig
3	udpBothPortsConfig
4	tcpSrcPortConfig
5	tcpDestPortConfig
6	tcpBothPortsConfig

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.2

hpSwitchCosAppTypeSrcPortmandatory

This object represents the source network port
that this policy applies to.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.3

hpSwitchCosAppTypeDestPortmandatory

This object represents the destination network
port that this policy applies to.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.4

hpSwitchCosAppTypePrioritymandatory

The 802.1p priority that should be applied to
packets containing the particular configured source
and/or destination port number in this entry. A
value of 255 represents that no priority override
should take place.

Integer32r/w

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.5

hpSwitchCosAppTypeDSCPPolicymandatory

The DSCP Policy to assign to packets received for
the specified application. This is an index into
the hpSwitchCosDSCPPolicy table, or the value 255
indicating no DSCP Policy exists. This policy is
associated with an 8…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.6

hpSwitchCosAppTypeResolvedPrioritymandatory

The 802.1p priority that will be applied to
packets received on the specified application.
This value represents the actual operating value
for this CoS application entry. A value of 255
represents no override of the in…

Integer32

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.7

hpSwitchCosAppTypeApplyPolicymandatory

This object determines which configuration policy,
hpSwitchCosAppTypePriority or
hpSwitchCosAppTypeDSCPPolicy, applies for the given
AppType CoS entry. These configuration policies
are mutually exclusive of one another.

Enumerationr/w

Enumerated Values:

1	applyHpSwitchCosAppTypePriority
2	applyHpSwitchCosAppTypeDSCPPolicy

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.8

hpSwitchCosAppTypeStatusmandatory

This object is used to create and delete in the
hpSwitchCosAppType table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.9

hpSwitchCosAppTypeMaxSrcPortmandatory

This object represents the maximum source network
port that this policy applies to. If a single,
specific port is being used and not a range, then
value of this object is zero.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.10

hpSwitchCosAppTypeMaxDestPortmandatory

This object represents the maximum destination
network port that this policy applies to. If a
single, specific port is being used and not a range,
then value of this object is zero.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.11

hpSwitchCosAppTypeIpPacketTypemandatory

This object represents the type of IP packet for which
this TCP and/or UDP application QoS will apply. The
default is IPv4.

Enumerationr/w

Enumerated Values:

1	ipv4PacketsOnly
2	ipv6PacketsOnly
3	ipv4AndIpv6Packets

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.12

hpSwitchQueueWatchTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10 · 1 row entry · 2 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchQueueWatchTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchQueueWatchTable'

A table that contains port-specific information
for queue monitoring.

hpSwitchQueueWatchEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1

A list of information maintained by every port
about queue monitoring for that port.

Indexes

hpSwitchQueueWatchPort

Column Syntax OID

hpSwitchQueueWatchPortmandatory

The port number of the port for which this entry
contains Queue monitoring information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1.1

hpSwitchQueueWatchStatemandatory

If configured for outbound, egress queues for the
corresponding port will be monitored for drops.

Enumerationr/w

Enumerated Values:

1	disabled
2	outbound

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1.2

hpSwitchPortIsolationConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2 · 1 row entry · 2 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchPortIsolationConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchPortIsolationConfigTable'

A table that contains information about the CoS
Application type configurations on the switch.  An
application is determined by its network source
and/or destination port number.

hpSwitchPortIsolationConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1

An entry in the switch
hpSwitchPortIsolationConfigEntry Table.

Indexes

hpSwitchPortIsolationPort

Column Syntax OID

hpSwitchPortIsolationPortmandatory

An entry in the IfIndex table representing a logical port
on this switch.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1.1

hpSwitchPortIsolationPortModemandatory

Defines the operational mode of a port when Port
Isolation feature is enabled.

Enumerationr/w

Enumerated Values:

1	uplink
2	public
3	private
4	local
5	group1
6	group2

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1.2

hpSwitchBWMinEgressPortConfigTable

table obsolete

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchBWMinEgressPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchBWMinEgressPortConfigTable'

New definitions under HP-ICF-RATE-LIMIT-MIB.
A table that contains information about the port's
	    egress Guaranteed Minimum Bandwidth configurations
	    on this switch.

hpSwitchBWMinEgressPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1

New definitions under HP-ICF-RATE-LIMIT-MIB.
The information associated with each port's egress
Guaranteed Minimum Bandwidth configuration.

Indexes

hpSwitchBWMinEgressPortIndex

Column	Syntax	OID
hpSwitchBWMinEgressPortIndexobsolete New definitions under HP-ICF-RATE-LIMIT-MIB. The ifIndex value which uniquely identifies a row in the Interfaces Table.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.1`
hpSwitchBWMinEgressPortPrctLowPriorityobsolete New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to be assigned to the egress Low-Priority queue for this port. Total values for all four queues must not exceed…	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.2`
hpSwitchBWMinEgressPortPrctNormalPriorityobsolete New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to be assigned to the egress Normal-Priority queue for this port. Total values for all four queues must not exc…	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.3`
hpSwitchBWMinEgressPortPrctMedPriorityobsolete New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to be assigned to the egress Medium-Priority queue for this port. Total values for all four queues must not exc…	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.4`
hpSwitchBWMinEgressPortPrctHighPriorityobsolete New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to be assigned to the egress High-Priority queue for this port. Total values for all four queues must not excee…	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.5`

hpSwitchRateLimitPortConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1 · 1 row entry · 7 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchRateLimitPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchRateLimitPortConfigTable'

A table that contains information about the port
Rate-Limiting configurations on this switch.

hpSwitchRateLimitPortConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1

The information associated with each port's
Rate-Limiting configuration.

Indexes

hpSwitchRateLimitPortIndex

Column Syntax OID

hpSwitchRateLimitPortIndexmandatory

The ifIndex value which uniquely identifies a row
in the Interfaces Table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.1

hpSwitchRateLimitPortControlModemandatory

The mode by which this port will be Rate-Limited
on ingress. If rateLimitPerPortOnly is configured,
there will be a single maximum rate for the entire
port. If rateLimitPerQueue is configured, the values
for each of the…

Enumerationr/w

Enumerated Values:

1	disabled
2	rateLimitPerPortOnly
3	rateLimitPerQueue

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.2

hpSwitchRateLimitPortSingleControlPrctmandatory

When hpSwitchRateLimitPortControlMode is configured
for rateLimitPerPortOnly, this value is the maximum
percentage of traffic that may be received by this
port on ingress.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.3

hpSwitchRateLimitPortPrctLowPrioritymandatory

The maximum percentage of traffic that may be
received by this port's Low-Priority queue on ingress.
hpSwitchRateLimitPortControlMode must be configured to
use rateLimitPerQueue for this to take effect. A value
of 0-per…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.4

hpSwitchRateLimitPortPrctNormalPrioritymandatory

The maximum percentage of traffic that may be
received by this port's Normal-Priority queue on
ingress. hpSwitchRateLimitPortControlMode must be
configured to use rateLimitPerQueue for this to take
effect. A value of 0-…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.5

hpSwitchRateLimitPortPrctMedPrioritymandatory

The maximum percentage of traffic that may be
received by this port's Medium-Priority queue on
ingress. hpSwitchRateLimitPortControlMode must be
configured to use rateLimitPerQueue for this to take
effect. A value of 0-…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.6

hpSwitchRateLimitPortPrctHighPrioritymandatory

The maximum percentage of traffic that may be
received by this port's High-Priority queue on
ingress. hpSwitchRateLimitPortControlMode must be
configured to use rateLimitPerQueue for this to take
effect. A value of 0-pe…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.7

hpSwitchDSCPRateLimitConfigTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchDSCPRateLimitConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchDSCPRateLimitConfigTable'

A table containing information about DSCP-based
rate limits and ports on which they are applied.

hpSwitchDSCPRateLimitConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1

Information about a single DSCP-based rate limit.

Indexes

hpSwitchDSCPRateLimitIndex

Column	Syntax	OID
hpSwitchDSCPRateLimitIndexmandatory An index into the DSCP rate limit table. The value is a DSCP codepoint.	DIFFSERV-DSCP-TCDscp Type Constraints: `range: 0..63`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.1`
hpSwitchDSCPRateLimitKbpsmandatory The rate limit in kilobits per second for a row of the DSCP rate limit table. Incoming traffic with the DSCP field of the IP header matching the index of the row will be limited to this rate and excess traffic will be …	Integer32r/w Constraints: `range: -1-10000000`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.2`
hpSwitchDSCPRateLimitPortsmandatory The applied ports for a row of the DSCP rate limit table. The rate limit from the hpSwitchDSCPRateLimitKbps column of the row will be applied on the logical ports specified. A rate limit may not be applied to individual…	Q-BRIDGE-MIBPortListr/w	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3`

hpSwitchTrunkTable

table mandatory

.1.3.6.1.4.1.11.2.14.11.5.1.7.1.35.1 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpSwitchTrunkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CONFIG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CONFIG-MIB::hpSwitchTrunkTable'

A table that contains information about the trunks
in this device.

hpSwitchTrunkEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.35.1.1

Information about a specific trunk in this device.

Indexes

hpSwitchTrunkIndex

Column	Syntax	OID
hpSwitchTrunkIndexmandatory The trunk index value which uniquely identifies a row in the Trunk Table.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.35.1.1.1`
hpSwitchTrunkMinActiveLinksoptional When the trunk is an LACP trunk, this variable defines the threshold for the minimum active links in the trunk. When the number of active links in the trunk reaches below the threshold, the trunk will be shut down. Conf…	Integer32r/w Constraints: `range: 0-8`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.35.1.1.2`
hpSwitchTrunkLacpEnableTimeroptional When the trunk is an LACP trunk, this variable defines the time in seconds to wait before re-enabling the trunk disabled by LACP threshold for active minimum links. This timer is disabled by default. Configuring a value…	Integer32r/w Constraints: `range: 0-604800`	`.1.3.6.1.4.1.11.2.14.11.5.1.7.1.35.1.1.3`