CM-SA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
502

ecpaControlTable

table
.1.3.6.1.4.1.2544.1.12.8.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk ecpaControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::ecpaControlTable' 
A list of entries for the control of Etherjack Connection
Performance Analyzer Streams. Upto 12 ECPA streams can
be configured per test head; 3 ECPA streams can be 
simultaneously executed.
ecpaControlEntry row .1.3.6.1.4.1.2544.1.12.8.1.1.1
A conceptual row in the ecpaControlTable.
Indexes
Column Syntax OID
ecpaControlIndex
An arbitrary integer index value used to uniquely identify
this Etherjack Connection Performance Analyzer Control Test head.
There is only one test head per card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.1
ecpaControlSourcePort
Pointer to the Access or Network Port on which the ECPA test
will be started within a card.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.2
ecpaControlTestType
The type of ECPA test to be performed. When 'duration' test is
specified, ECPA test is run for 'ecpaControlDuration' time.
When 'numFrames' test is specified, ECPA test is run for
'ecpaControlNumFrames', when 'contin…
EcpaTestTyper/w
Type Values:
1duration
2numframes
3continuous
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.3
ecpaControlNumFrames
This object enables specification of the number of frames
for traffic generation. Traffic Generation will be completed
after the specified number of frames are transmitted.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.4
ecpaControlDuration
This object enables specification of the time in seconds
for traffic generation. Traffic Generation will be stopped
after the specified time interval is exhausted.
Integer32r/w
Constraints:
range: 0-259200
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.5
ecpaControlInjectorDirection
This object enables specification of the direction of
traffic generation. This value must be specified if the
interface is used for traffic generation. Both of
ecpaControlInjectorDirection and ecpaControlMonitorDirectio…
CM-COMMON-MIBTrafficDirectionr/w
Type Values:
1a2n
2n2a
3ingress
4egress
5n2n
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.6
ecpaControlMonitorDirection
This object enables specification of the direction of
receival of generated traffic. This value must be specified if the
interface is used for receiving/monitoring generated traffic.
Both of ecpaControlInjectorDirection…
CM-COMMON-MIBTrafficDirectionr/w
Type Values:
1a2n
2n2a
3ingress
4egress
5n2n
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.7
ecpaControlStream1
This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream1. Non 0 value indicates the
selected ECPA stream.
Integer32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.8
ecpaControlStream2
This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream2. Non 0 value indicates the
selected ECPA stream.
Integer32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.9
ecpaControlStream3
This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream3. Non 0 value indicates the
selected ECPA stream.
Integer32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.10
ecpaControlAction
This object enables starting/stopping of traffic generation
as well as resetting of monitored streams. This object may
not be specified at configuration creation time - in this
case it will take the value of `none'. Th…
EcpaControlActionr/w
Type Values:
0not-applicable
1start
2stop
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.11
ecpaControlTestStatus
This object reflects the current status of test set configuration
entry. Upon creation, the status has a value of `initial'; the
status changes to `in-progress' upon ecpaControlAction
indicating `start'; the status chan…
EcpaTestStatus
Type Values:
1initial
2in-progress
3stopped
4completed
5aborted
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.12
ecpaControlStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.13
ecpaControlRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.1.1.14

ecpaConfigStreamTable

table
.1.3.6.1.4.1.2544.1.12.8.1.2 · 1 row entry · 29 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk ecpaConfigStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::ecpaConfigStreamTable' 
A list of entries for the configuration of Etherjack Connection
Performance Analyzer Stream Specifications.
ecpaConfigStreamEntry row .1.3.6.1.4.1.2544.1.12.8.1.2.1
A conceptual row in the ecpaConfigStreamTable.
Indexes
Column Syntax OID
ecpaConfigStreamIndex
An arbitrary integer index value used to uniquely identify
this Etherjack Connection Performance Analyzer.
Integer32r/w
Constraints:
range: 1-48
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.1
ecpaConfigStreamName
Symbolic Stream Name that can be associated with an ECPA stream.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.2
ecpaConfigStreamFrameSize
This object enables specification of fixed length frame size
in bytes for traffic generation. If not specified, default value
of 64 bytes is used.
CM Aggregation Product limits the upper range value to 9600.
Integer32r/w
Constraints:
range: 64-9612
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.3
ecpaConfigStreamRate
The object enables specification of the traffic generation rate.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.4
ecpaConfigStreamPayloadType
This object enables specification of type of payload to generate
`fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes.
`random' type indicates traffic generation with pseudo-random
pattern.
EcpaPayloadTyper/w
Type Values:
1fixed
2random
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.5
ecpaConfigStreamSignature
Indicates an 8-byte signature specified by the user in
hexadecimal or ASCII format. This signature is currently
used by the FSP150Mx products for test frame recognition and
will be appended directly after the ECPA Si…
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.6
ecpaConfigStreamDestinationMAC
Allows specification of destination MAC in the generated
traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.7
ecpaConfigStreamSourceMAC
Allows specification of source MAC in the generated
traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.8
ecpaConfigStreamOuterVlanEnabled
Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is manda…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.9
ecpaConfigStreamOuterVlanId
Outer VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.10
ecpaConfigStreamOuterVlanPrio
Outer VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.11
ecpaConfigStreamOuterVlanEtherType
EtherType associated with the Outer VLAN Tag. Valid only
if ecpaConfigStreamOuterVlanEnabled is enabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.12
ecpaConfigStreamInnerVlanEnabled
Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is manda…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.13
ecpaConfigStreamInnerVlanId
Inner VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.14
ecpaConfigStreamInnerVlanPrio
Inner VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.15
ecpaConfigStreamInnerVlanEtherType
EtherType associated with the Inner VLAN Tag. Valid only
if ecpaConfigStreamInnerVlanEnabled is enabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.16
ecpaConfigStreamIpVersion
This object enables specification of IP data in the generated
test traffic. Value of `ipv4' allows test data to be
IP v4 compatible.
Value of `ipv6' allows test data to be IP v6 compatible.
CM-COMMON-MIBIpVersionr/w
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.17
ecpaConfigStreamIpV4Address
This object enables specification of ipv4 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv4.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.18
ecpaConfigStreamIpV6Address
This object enables specification of ipv6 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv6.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.19
ecpaConfigStreamPrioMapMode
This object enables specification of Priority Mapping Mode for
the test stream.
CM-COMMON-MIBIpPriorityMapModer/w
Type Values:
0not-applicable
1none
2priomap-tos
3priomap-dscp
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.20
ecpaConfigStreamPrioVal
This object enables specification of Priority Value for
ecpaConfigStreamPrioMapMode as TOS/DSCP.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.21
ecpaConfigStreamInnerVlan2Enabled
Allows specification of a VLAN tagged ECPA stream. This variable
enables the second(inner) VLAN specification, in the case of a
3-tagged ECPA stream. If a three tagged ECPA stream is
desired, this specification is man…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.22
ecpaConfigStreamInnerVlan2Id
Inner (second) VLAN Id associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.23
ecpaConfigStreamInnerVlan2Prio
Inner (second) VLAN Priority associated with the ECPA stream. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.24
ecpaConfigStreamInnerVlan2EtherType
EtherType associated with the Inner (second) VLAN Tag. Valid only
if ecpaConfigStreamInnerVlan2Enabled is enabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.25
ecpaConfigStreamDestIpV4Address
This object enables specification of destination ipv4 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv4.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.26
ecpaConfigStreamDestIpV6Address
This object enables specification of destination ipv6 IP Address for
the test stream.This is used when ecpaConfigStreamIpVersion is ipv6.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.27
ecpaConfigStreamUsePortSourceMAC
This object when not enabled indicates that
MAC Address specified by ecpaConfigStreamSourceMAC as the source MAC
Address of the ECPA test stream.
For EGX, if enabled indicates that the corresponding ECPA test stream
wil…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.28
ecpaConfigStreamRateHi
The object enables specification of the higher 32 bits of the traffic generation rate.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.2.1.29

ecpaTestStreamTable

table
.1.3.6.1.4.1.2544.1.12.8.1.3 · 1 row entry · 54 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk ecpaTestStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::ecpaTestStreamTable' 
A list of entries containing results of a previous test.
ecpaTestStreamEntry row .1.3.6.1.4.1.2544.1.12.8.1.3.1
A conceptual row in the ecpaTestStreamTable. Entries in this
table show results of the current ECPA test.
Indexes
Column Syntax OID
ecpaTestStreamIndex
An integer index value corresponding to the stream index
for which the ECPA test was initiated.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.1
ecpaTestStreamSourcePort
An integer index value corresponding to the ifIndex
for which the ECPA test was initiated.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.2
ecpaTestStreamName
Symbolic Stream Name that can be associated with an ECPA stream.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.3
ecpaTestStreamFrameSize
This object enables specification of fixed length frame size
in bytes for traffic generation. If not specified, default value
of 64 bytes is used.
Integer32r/w
Constraints:
range: 64-9612
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.4
ecpaTestStreamRate
The object enables specification of the traffic generation rate.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.5
ecpaTestStreamPayloadType
This object enables specification of type of payload to generate
`fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes.
`random' type indicates traffic generation with pseudo-random
pattern.
EcpaPayloadTyper/w
Type Values:
1fixed
2random
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.6
ecpaTestStreamSignature
Indicates an 8-byte signature specified by the user in
hexadecimal or ASCII format. This signature is currently
used by the FSP150Mx products for test frame recognition and
will be appended directly after the ECPA Si…
OctetStringr/w
Constraints:
range: 10-10
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.7
ecpaTestStreamDestinationMAC
Allows specification of destination MAC in the generated
traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.8
ecpaTestStreamSourceMAC
Allows specification of source MAC in the generated
traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.9
ecpaTestStreamOuterVlanEnabled
Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is manda…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.10
ecpaTestStreamOuterVlanId
Outer VLAN Id associated with the ECPA stream. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.11
ecpaTestStreamOuterVlanPrio
Outer VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.12
ecpaTestStreamOuterVlanEtherType
EtherType associated with the Outer VLAN Tag. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.13
ecpaTestStreamInnerVlanEnabled
Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream is
desired, this specification is manda…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.14
ecpaTestStreamInnerVlanId
Inner VLAN Id associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.15
ecpaTestStreamInnerVlanPrio
Inner VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.16
ecpaTestStreamInnerVlanEtherType
EtherType associated with the Inner VLAN Tag. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.17
ecpaTestStreamIpVersion
This object enables specification of IP data in the generated
test traffic. Value of `ipv4' allows test data to be
IP v4 compatible.
Value of `ipv6' allows test data to be IP v6 compatible.
CM-COMMON-MIBIpVersionr/w
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.18
ecpaTestStreamIpV4Address
This object enables specification of ipv4 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv4.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.19
ecpaTestStreamIpV6Address
This object enables specification of ipv6 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv6.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.20
ecpaTestStreamPrioMapMode
This object enables specification of Priority Mapping Mode for
the test stream.
CM-COMMON-MIBIpPriorityMapModer/w
Type Values:
0not-applicable
1none
2priomap-tos
3priomap-dscp
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.21
ecpaTestStreamPrioVal
This object enables specification of Priority Value for
ecpaTestStreamPrioMapMode as TOS/DSCP.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.22
ecpaTestStreamMonStartTime
The start time of the ECPA test for this stream.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.23
ecpaTestStreamMonEndTime
The end time of the ECPA test for this stream.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.24
ecpaTestStreamMonElapsedTime
The elapsed time of ECPA test for this stream in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.25
ecpaTestStreamMonTxFrames
The total number of frames transmitted(generated) so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.26
ecpaTestStreamMonRxFrames
The total number of frames received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.27
ecpaTestStreamMonRxPercentSuccess
Received frames as a percentage of transmitted frames.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.28
ecpaTestStreamMonRxOutOfSeqErrs
The total number of out of sequence errors received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.29
ecpaTestStreamMonRxSeqGaps
The total number of sequence gaps received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.30
ecpaTestStreamMonRxNonEcpaFrames
The total number of non ECPA frames received during the execution.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.31
ecpaTestStreamMonRxMinDelay
The minimum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.32
ecpaTestStreamMonRxMaxDelay
The maximum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.33
ecpaTestStreamMonRxAvgDelay
The average delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.34
ecpaTestStreamMonRx1stFrameSize
Frame size of the Monitored First Frame.
Integer32
Constraints:
range: 64-9612
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.35
ecpaTestStreamMonRx1stFrame1Octets
The frame contents of the first received frame - first 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.36
ecpaTestStreamMonRx1stFrame2Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.37
ecpaTestStreamMonRx1stFrame3Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.38
ecpaTestStreamMonRx1stFrame4Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.39
ecpaTestStreamMonRx1stFrame5Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.40
ecpaTestStreamMonRx1stFrame6Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.41
ecpaTestStreamMonRx1stFrame7Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.42
ecpaTestStreamMonRx1stFrame8Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.43
ecpaTestStreamMonRx1stFrame9Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.44
ecpaTestStreamMonRx1stFrame10Octets
The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state.
OctetString
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.45
ecpaTestStreamMonRxBitRate
The object provides the average bit rate on the ECPA test stream.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.3.1.46
ecpaTestStreamInnerVlan2Enabled
This variable indicates the second(inner) VLAN specification, in the case of a
3-tagged ECPA stream. If a three tagged ECPA stream is
desired, this indicates true.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.47
ecpaTestStreamInnerVlan2Id
This variable provides the Inner (second) VLAN Id associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled.
CM-COMMON-MIBVlanId
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.48
ecpaTestStreamInnerVlan2Prio
This variable provides the Inner (second) VLAN Priority associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled.
CM-COMMON-MIBVlanPriority
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.49
ecpaTestStreamInnerVlan2EtherType
This variable provides the EtherType associated with the Inner (second) VLAN Tag.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.50
ecpaTestStreamDestIpV4Address
This object provides the destination ipv4 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv4.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.51
ecpaTestStreamDestIpV6Address
This object provides the destination ipv6 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv6.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.52
ecpaTestStreamConfigChanged
This object provides information on whether the associated ecpaConfigStream is changed.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.53
ecpaTestStreamRateHi
The object enables specification of the higher 32 bits of the traffic generation rate.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.3.1.54

esaProbeTable

table
.1.3.6.1.4.1.2544.1.12.8.1.4 · 1 row entry · 53 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeTable' 
A list of entries corresponding to ESA Probes.
esaProbeEntry row .1.3.6.1.4.1.2544.1.12.8.1.4.1
A row in the esaProbeTable. Entries can
be created in this table by management application action.
The slotIndex should be 255 if the product is cm5.1.
Indexes
Column Syntax OID
esaProbeIndex
An integer index value used to uniquely identify
this ESA Probe within a Card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.1
esaProbeName
A unique identifier used by the Manager to distinguish
the ESA Probe.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.2
esaProbeSourcePort
This object points to the Port to which the ESA Probe
is attached, i.e.on which the service to be monitored resides.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.3
esaProbeAssocSchedGroup
This object points to the probe's associated Scheduled Group.
Initially, when the probe is not associated with a Group,
this object's value is set to {0.0}.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.4
esaProbeDirection
This object allows to specify the direction of Probe
traffic generation.
EsaProbeDirectionr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.5
esaProbeProtocol
Protocol to be used in ESA Probe messages.
'icmpTimestamp', 'icmpEcho', 'udpEcho' protocols support
layer-3 ethernet service assurance. If the remote reflector
is an ADVA equipment based on CM family of products,
one-…
EsaProbeProtocolr/w
Type Values:
1icmpEcho
2udpEcho
3icmpTimestamp
4y1731
5y1731-slm-slr
6y1731-slm-dmm
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.6
esaProbeSrcIpAddress
Variable that allows specification of the Probe's source
IP Address. This IP Address is used in the IP header of
the ESA Probe generated packets, as source address.
NOTE: This attribute is not applicable to Y.1731 prob…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.7
esaProbeSrcSubnetMask
Variable that allows specification of the Probe's source
IP Subnet Mask.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.8
esaProbeDestIpAddress
Variable that allows specification of the Reflector's
destination IP Address. This IP Address is used in the IP header
of the ESA Probe generated packets, as destination address.
NOTE: This attribute is not applicable …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.9
esaProbeSrcMep
This attribute is applicable only for Y.1731 probes. It identifies
the source MEP that initiates the Y.1731 LMMs and DMMs.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.10
esaProbeDestMepType
This attribute is applicable only for Y.1731 probes. This indicates
if the destination MEP is specified using the MEP ID object
esaProbeDestMepId.
CM-COMMON-MIBMepDestinationTyper/w
Type Values:
0not-applicable
1mepid
2macaddress
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.11
esaProbeDestMepMacAddr
This attribute is applicable only for Y.1731 probes. It identifies
the destination MEP that responds to the LMMs and DMMs. This
MAC address will be the destination MAC address for LMM and DMM
frames if esaProbeY1731Dest…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.12
esaProbeDestMepId
This attribute is applicable only for Y.1731 probes. It identifies
the destination MEP that responds to the LMMs and DMMs. The MAC
address of this RMEP ID from RMEP database will be the destination
MAC address for LMM a…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.13
esaProbeVlanTagEnabled
Ability to specify whether or not to use VLAN tagged or untagged
ESA traffic generation on the Probe.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.14
esaProbeVlanTagEtherType
This variable allows the user to specify the
monitored service's VLAN tag Ether Type.
Valid if 'esaProbeVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.15
esaProbeVlanId
This variable allows the user to specify the
monitored service's VLAN tag. Valid if 'esaProbeVlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.16
esaProbeVlanPrio
This variable allows the user to specify the
monitored service's VLAN priority. Valid if
'esaProbeVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.17
esaProbeInnerVlanTagEnabled
Ability to specify whether or not to use Inner VLAN tag.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.18
esaProbeInnerVlanTagEtherType
This variable allows the user to specify the
monitored service's Inner VLAN tag Ether Type.
Valid if 'esaProbeInnerVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.19
esaProbeInnerVlanId
This variable allows the user to specify the
monitored service's Inner VLAN tag. Valid if 'esaProbeInnerVlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.20
esaProbeInnerVlanPrio
This variable allows the user to specify the
monitored service's Inner VLAN priority. Valid if
'esaProbeInnerVlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.21
esaProbeIpPrioMapMode
This object enables specification of Priority Mapping Mode for
the ESA Probe.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBIpPriorityMapModer/w
Type Values:
0not-applicable
1none
2priomap-tos
3priomap-dscp
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.22
esaProbeIpPriority
This object enables specification of Priority Value for
esaProbePrioMapMode as priomap-tos,priomap-dscp.
NOTE: This attribute is not applicable to Y.1731 probes.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.23
esaProbePktsPerSample
This object enables specification of number of packets within
a sample run for ESA traffic generation. A non-zero value
must be specified.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.24
esaProbePktSize
This object enables specification of fixed length frame size
in bytes for ESA traffic generation. If not specified, default value
of 104 bytes is used.
NOTE: This attribute is not available to Y.1731 probes.
Integer32r/w
Constraints:
range: 64-2000
range: 0-0
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.25
esaProbeInterPktGap
This object enables specification of interval in milliseconds between
packet generation. A non-zero value must be specified.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.26
esaProbePktDeadInterval
This object enables specification of the dead interval in seconds
after 'esaProbePktsPerSample' have been generated within the sample.
This allows for settling time of the ESA traffic.
A non-zero value must be specified…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.27
esaProbeResponseTimeout
This object allows specification of the timeout value to
determine lost packets. Time specified in seconds.
NOTE: This attribute is not applicable to Y.1731 probes.

This object is applicable to Layer 3 an…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.28
esaProbeY1731DmmPktSize
This object is only applicable to Y.1731 probes.
This object enables specification of the TLV size for
Delay Measurement Frames (DMMs).

Value of 0 is a read-only value when the Probe protocol is not y1731…
Integer32r/w
Constraints:
range: 64-9600
range: 0-0
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.29
esaProbeY1731LmmInterval
LMM frame transmission period.
For Loss Measurement Frames, only interval-1sec is supported.
This attribute is only applicable to Y.1731 probes.
EsaProbePktIntervalTyper/w
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.30
esaProbeY1731DmmInterval
DMM frame transmission period.
This attribute is only applicable to Y.1731 probes.
EsaProbePktIntervalTyper/w
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.31
esaProbeHistoryBins
This object allows specification of number of history bins.
This is the total history data that will be maintained
for an ESA Probe run, at any instance.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.32
esaProbeHistoryInterval
This object allows specification of the history interval
period.
EsaProbeHistoryIntervalTyper/w
Type Values:
1interval-1min
2interval-5min
3interval-10min
4interval-15min
5interval-60min
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.33
esaProbeDistHistoryBins
This object allows specification of number of distribution
history bins. This is the total history distribution data that
will be maintained for an ESA Probe run, at any instance.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.34
esaProbeDistHistoryInterval
This object allows specification of the history distribution
interval period.
EsaProbeHistoryIntervalTyper/w
Type Values:
1interval-1min
2interval-5min
3interval-10min
4interval-15min
5interval-60min
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.35
esaProbeCreationTime
This object provides the creation time of the ESA Probe.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.36
esaProbeStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.37
esaProbeRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.38
esaProbeMultiCOSEnabled
This object is introduced for FSP150CC Release 4.3.
This object is only applicable for Y.1731 and
SLM-SLR Probe Protocol Types. This object can be used
to specify the multiple class of services (COS) for each
ESA Pro…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.39
esaProbeSLAMonitorType
This object indicates whether the Probe is a point-to-point type
or a point-to-multipoint type. Only SLM-SLR probes can be
point-to-multipoint.
EsaProbeSLAMonitorTyper/w
Type Values:
0not-applicable
1point-to-point
2point-to-multipoint
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.40
esaProbeCOSType
This object can be used to specify the first Class of Service associated with
the Y.1731/SLM-SLR ESA Probe. In the case of a multiCOS Probe, this object
has no semantics when multiple COS levels exist. This object is …
CM-COMMON-MIBClassOfServiceTyper/w
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.41
esaProbeSLMMulticastMACEnabled
This object can be used to specify whether the SLM/SLR protocol Probe will use
multicast MAC address in SLM (Synthetic Loss Measurement) messages.
This object is only valid for SLM-SLR ESA Probes.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.42
esaProbeSOAMInterval
This object can be used to specify the packet interval type for Y.1731 LM/DM
and SLM/SLR based ESA Probes, for the first Class of Service.
In the case of a multiCOS Probe, this object has no semantics
when multiple C…
EsaProbePktIntervalTyper/w
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.43
esaProbeSOAMPktSize
This object can be used to specify the packet size for SLM-SLR based ESA Probes,
for the first Class of Service. In the case of multiCOS Probe, this object has
no semantics when multiple COS levels exist. In such cases…
Integer32r/w
Constraints:
range: 64-9612
range: 0-0
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.44
esaProbeInner2VlanTagEnabled
Ability to specify whether or not to use Inner2 VLAN tag.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.45
esaProbeInner2VlanTagEtherType
This variable allows the user to specify the
monitored service's Inner2 VLAN tag Ether Type.
Valid if 'esaProbeInner2VlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.46
esaProbeInner2VlanId
This variable allows the user to specify the
monitored service's Inner2 VLAN tag. Valid if 'esaProbeInner2VlanTagEnabled'
is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.47
esaProbeInner2VlanPrio
This variable allows the user to specify the
monitored service's Inner2 VLAN priority. Valid if
'esaProbeInner2VlanTagEnabled' is specified as TRUE.
NOTE: This attribute is not applicable to Y.1731 probes.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.48
esaProbeAdminState
This object represents the Administrative State of the ESA Probe.
This is not externally managed.
CM-COMMON-MIBAdminState
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.49
esaProbeOperationalState
This object represents the Operational State of the ESA Probe.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.50
esaProbeSecondaryState
This object represents the Secondary State of the ESA Probe.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.51
esaProbeMacAddress
This attribute is applicable only for Y.1731 probes. It identifies
the destination MacAddress which esa using
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.52
esaProbeAlias
This object allows SNMP management entities to provide an
alias for an ESA Probe.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2544.1.12.8.1.4.1.53

esaProbeScheduleGroupTable

table
.1.3.6.1.4.1.2544.1.12.8.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeScheduleGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeScheduleGroupTable' 
A list of entries that allow groups of ESA Probes
to be scheduled.
esaProbeScheduleGroupEntry row .1.3.6.1.4.1.2544.1.12.8.1.5.1
A row in esaProbeScheduleGroupTable. Entries are created
in this table by management application action.
Indexes
Column Syntax OID
esaProbeScheduleGroupIndex
A unique index to distinguish the ESA Probe Schedule Group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.1
esaProbeScheduleGroupDescr
Description of the probe schedule group.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.2
esaProbeScheduleGroupProbeList
A comma separated list of esaProbeName's, that will have the
same schedule.
OctetStringr/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.3
esaProbeScheduleGroupType
This object allows to specify whether the ESA probe group
schedule is 'one-shot' or 'periodic'. A 'one-shot' schedule executes only
once and then stops. A 'periodic' schedule reoccurs
every 'esaProbeScheduleGroupInterva…
CM-COMMON-MIBScheduleTyper/w
Type Values:
1periodic
2one-shot
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.4
esaProbeScheduleGroupStartTime
This object allows specification of the start time
of the ESA Probe Group. Value of time less than current system
time will equate to current time. When the system time reaches
this configured time, the ESA Probe Group …
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.5
esaProbeScheduleGroupDuration
This object allows specification of the duration in
'seconds' for ESA Probe Group run. Note that a value of
4294967295 means Duration as FOREVER.
FOREVER value is only applicable to schedule type oneshot.
The value 429…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.6
esaProbeScheduleGroupInterval
This object allows specification of the interval in
'seconds' between successive runs for ESA Probe Group. This
variable is only valid if the 'esaProbeScheduleGroupType' is
'periodic'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.7
esaProbeScheduleGroupAction
This object allows to suspend/resume the ESA scheduled group.
EsaActionr/w
Type Values:
0not-applicable
1suspend
2resume
3addEsaProbe
4removeEsaProbe
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.8
esaProbeScheduleGroupStatus
This object indicates the current status of the ESA Probe Group.
CM-COMMON-MIBSchedActivityStatus
Type Values:
1initial
2active
3suspended
4completed
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.9
esaProbeScheduleGroupStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.10
esaProbeScheduleGroupRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.11
esaProbeScheduleGroupActionProbeList
A comma separated list of esaProbeName's, if set esaProbeScheduleGroupAction as add or remove,
they will be add or remove from esaProbeScheduleGroupProbeList.
OctetStringr/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.2544.1.12.8.1.5.1.12

esaReflectorTable

table
.1.3.6.1.4.1.2544.1.12.8.1.6 · 1 row entry · 18 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaReflectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaReflectorTable' 
A list of entries corresponding to ESA Reflectors.
NOTE: There is no need to create reflectors for Y.1731 probes as
the MEPs will respond by default.
esaReflectorEntry row .1.3.6.1.4.1.2544.1.12.8.1.6.1
A row in the esaReflectorTable. Entries can
be created in this table by management application action.
Indexes
Column Syntax OID
esaReflectorIndex
A unique index to distinguish the ESA Reflector.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.1
esaReflectorName
A unique identifier to distinguish the ESA Reflector.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.2
esaReflectorIpAddress
This object allows specification of the Reflector's IP Address.
Reflector listens for packets destined at this IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.3
esaReflectorSubnetMask
This object allows specification of the
Reflector's IP Subnet mask.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.4
esaReflectorSourcePort
This object points to the Port to which the ESA Reflector
is attached, i.e.on which the service to be monitored resides.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.5
esaReflectorIpPrioMapMode
This object enables specification of Priority Mapping Mode for
the ESA Reflector.
CM-COMMON-MIBIpPriorityMapModer/w
Type Values:
0not-applicable
1none
2priomap-tos
3priomap-dscp
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.6
esaReflectorIpPriority
This object enables specification of Priority Value for
esaReflectorPrioMapMode as priomap-tos,priomap-dscp.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.7
esaReflectorAction
This object allows to suspend/resume the ESA reflector.
EsaActionr/w
Type Values:
0not-applicable
1suspend
2resume
3addEsaProbe
4removeEsaProbe
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.8
esaReflectorSuspended
This object indicates whether the ESA Reflector is active or suspended.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.9
esaReflectorCreationTime
This object provides the creation time of the ESA Reflector.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.10
esaReflectorStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.11
esaReflectorRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.12
esaReflectorDirection
This object provides the direction of the ESA Reflector.
EsaReflectorDirectionr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.13
esaReflectorAdminState
This object represents the Administrative State of the ESA Reflector.
This is not externally managed.
CM-COMMON-MIBAdminState
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.14
esaReflectorOperationalState
This object represents the Operational State of the ESA Reflector.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.15
esaReflectorSecondaryState
This object represents the Secondary State of the ESA Reflector.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.16
esaReflectorMacAddress
This attribute is applicable only for Y.1731 probes. It identifies
the destination MacAddress which esa using
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.17
esaReflectorAlias
This object allows SNMP management entities to provide an
alias for an ESA Reflector.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2544.1.12.8.1.6.1.18

esaProbeStatsTable

table
.1.3.6.1.4.1.2544.1.12.8.1.7 · 1 row entry · 71 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeStatsTable' 
A collection of ESA Probe related statistics kept for
a particular ESA Probe entity. These reflect the
current data.
esaProbeStatsEntry row .1.3.6.1.4.1.2544.1.12.8.1.7.1
A conceptual row in the esaProbeStatsTable. An entry exists
in this table for each ESA Probe.
Indexes
Column Syntax OID
esaProbeStatsDestinationIndex
An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.1
esaProbeStatsCOSIndex
An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.2
esaProbeStatsIndex
An arbitrary integer index value used to uniquely identify
this ESA Probe statistics entry.
Index 1 corresponds to current and index 2 to rollover.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.3
esaProbeStatsIntervalType
Indicates the type of collection, i.e. whether it is
current, or rollover.
EsaProbePmIntervalType
Type Values:
1current
2rollover
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.4
esaProbeStatsCOS
The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported.
CM-COMMON-MIBClassOfServiceType
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.5
esaProbeStatsValid
Indicates the validity of the bin.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.6
esaProbeStatsAction
Allows the Manager to clear the bin.
CM-COMMON-MIBCmPmBinActionr/w
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.7
esaProbeStatsP2RPkts
The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeStatsR…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.8
esaProbeStatsP2RErredPkts
The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to resource
limitations (buffers).
This can h…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.9
esaProbeStatsP2RSyncErrs
The number of (time) Synchronization Errors from probe to reflector
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.10
esaProbeStatsP2RLostPkts
The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.11
esaProbeStatsR2PPkts
The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeStatsP2RP…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.12
esaProbeStatsR2PErredPkts
The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after it was
marked as lost (i.e.beyond timeo…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.13
esaProbeStatsR2PSyncErrs
The number of (time) Synchronization Errors from reflector to probe
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.14
esaProbeStatsR2PLostPkts
The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.15
esaProbeStatsLostPkts
The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This is not applicable for Y.1731 probes.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.16
esaProbeStatsSeqGaps
The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is termed as a sequence gap.
NOTE: This is n…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.17
esaProbeStatsOutOfSeqErrs
The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is termed as out of sequence error.
NOTE: …
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.18
esaProbeStatsMinRoundTripDelay
The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.19
esaProbeStatsMaxRoundTripDelay
The maximum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.20
esaProbeStatsAvgRoundTripDelay
The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.21
esaProbeStatsSumRoundTripDelay
The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.22
esaProbeStatsSumOfSqRoundTripDelay
The sum of square of round trip delays in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.23
esaProbeStatsMinOnewayP2RDelay
The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.24
esaProbeStatsMaxOnewayP2RDelay
The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.25
esaProbeStatsAvgOnewayP2RDelay
The average one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.26
esaProbeStatsSumOnewayP2RDelay
The total sum of one-way delay from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.27
esaProbeStatsSumOfSqOnewayP2RDelay
The sum of square of one-way delay from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.28
esaProbeStatsMinOnewayR2PDelay
The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.29
esaProbeStatsMaxOnewayR2PDelay
The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.30
esaProbeStatsAvgOnewayR2PDelay
The average one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.31
esaProbeStatsSumOnewayR2PDelay
The total sum of one-way delay from destination to source
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.32
esaProbeStatsSumOfSqOnewayR2PDelay
The sum of square of one-way delay from destination to source
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.33
esaProbeStatsMinPosP2RJitter
The minimum positive one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.34
esaProbeStatsMaxPosP2RJitter
The maximum positive one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.35
esaProbeStatsNumPosP2RJitter
The total number of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.36
esaProbeStatsSumPosP2RJitter
The total sum of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.37
esaProbeStatsSumOfSqPosP2RJitter
The sum of square of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.38
esaProbeStatsMinNegP2RJitter
The minimum negative one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.39
esaProbeStatsMaxNegP2RJitter
The maximum negative one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.40
esaProbeStatsNumNegP2RJitter
The total number of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.41
esaProbeStatsSumNegP2RJitter
The total sum of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.42
esaProbeStatsSumOfSqNegP2RJitter
The sum of square of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.43
esaProbeStatsMinPosR2PJitter
The minimum positive one-way jitter from destination to source
in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.44
esaProbeStatsMaxPosR2PJitter
The maximum positive one-way jitter from destination to
source in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.45
esaProbeStatsNumPosR2PJitter
The total number of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.46
esaProbeStatsSumPosR2PJitter
The total sum of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.47
esaProbeStatsSumOfSqPosR2PJitter
The sum of square of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.48
esaProbeStatsMinNegR2PJitter
The minimum negative one-way jitter from destination to source
in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.49
esaProbeStatsMaxNegR2PJitter
The maximum negative one-way jitter from destination to
source in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.50
esaProbeStatsNumNegR2PJitter
The total number of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.51
esaProbeStatsSumNegR2PJitter
The total sum of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.52
esaProbeStatsSumOfSqNegR2PJitter
The sum of square of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.53
esaProbeStatsY1731P2RNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts are non-zero then
there could be some k…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.54
esaProbeStatsY1731R2PNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these counts are non-zero then
there could be som…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.55
esaProbeStatsY1731RxLmSamples
This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by the user
to differentiate between valid…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.56
esaProbeStatsY1731RxDmSamples
This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.57
esaProbeStatsY1731P2RFrames
This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector). Based
on the configuration the MEP co…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.58
esaProbeStatsY1731R2PFrames
This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe). Based
on the configuration the MEP co…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.59
esaProbeStatsAvgAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.60
esaProbeStatsAvgAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.61
esaProbeStatsMinAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.62
esaProbeStatsMinAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.63
esaProbeStatsMaxAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.64
esaProbeStatsMaxAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.7.1.65
esaProbeStatsNumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.66
esaProbeStatsNumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.67
esaProbeStatsSumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.68
esaProbeStatsSumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.69
esaProbeStatsSumOfSqAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.70
esaProbeStatsSumOfSqAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.7.1.71

esaProbeHistoryTable

table
.1.3.6.1.4.1.2544.1.12.8.1.8 · 1 row entry · 71 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeHistoryTable' 
A collection of ESA Probe related history kept for
a particular ESA Probe entity. These reflect the
current data.
esaProbeHistoryEntry row .1.3.6.1.4.1.2544.1.12.8.1.8.1
A conceptual row in the esaProbeHistoryTable. An entry exists
in this table for each ESA Probe.
Indexes
Column Syntax OID
esaProbeHistoryDestinationIndex
An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.1
esaProbeHistoryCOSIndex
An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.2
esaProbeHistoryIndex
An arbitrary integer index value used to uniquely identify
this ESA Probe statistics history entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.3
esaProbeHistoryTime
Indicates the time of history bin creation.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.4
esaProbeHistoryValid
Indicates the validity of the bin.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.5
esaProbeHistoryAction
Allows the Manager to clear the bin.
CM-COMMON-MIBCmPmBinActionr/w
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.6
esaProbeHistoryCOS
The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported.
CM-COMMON-MIBClassOfServiceType
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.7
esaProbeHistoryP2RPkts
The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeHistor…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.8
esaProbeHistoryP2RErredPkts
The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to resource
limitations (buffers).
This can h…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.9
esaProbeHistoryP2RSyncErrs
The number of (time) Synchronization Errors from probe to reflector
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.10
esaProbeHistoryP2RLostPkts
The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.11
esaProbeHistoryR2PPkts
The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will always be the
same as the esaProbeHistoryP2…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.12
esaProbeHistoryR2PErredPkts
The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after it was
marked as lost (i.e.beyond timeo…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.13
esaProbeHistoryR2PSyncErrs
The number of (time) Synchronization Errors from reflector to probe
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.14
esaProbeHistoryR2PLostPkts
The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.15
esaProbeHistoryLostPkts
The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This is not applicable for Y.1731 probes.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.16
esaProbeHistorySeqGaps
The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is termed as a sequence gap.
NOTE: This is n…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.17
esaProbeHistoryOutOfSeqErrs
The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is termed as out of sequence error.
NOTE: …
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.18
esaProbeHistoryMinRoundTripDelay
The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.19
esaProbeHistoryMaxRoundTripDelay
The maximum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.20
esaProbeHistoryAvgRoundTripDelay
The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.21
esaProbeHistorySumRoundTripDelay
The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.22
esaProbeHistorySumOfSqRoundTripDelay
The sum of square of round trip delays in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.23
esaProbeHistoryMinOnewayP2RDelay
The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.24
esaProbeHistoryMaxOnewayP2RDelay
The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.25
esaProbeHistoryAvgOnewayP2RDelay
The average one-way source to destination delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.26
esaProbeHistorySumOnewayP2RDelay
The total sum of one-way delay from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.27
esaProbeHistorySumOfSqOnewayP2RDelay
The sum of square of one-way delay from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.28
esaProbeHistoryMinOnewayR2PDelay
The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.29
esaProbeHistoryMaxOnewayR2PDelay
The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.30
esaProbeHistoryAvgOnewayR2PDelay
The average one-way destination to source delay(in microseconds)
across all packets received in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.31
esaProbeHistorySumOnewayR2PDelay
The total sum of one-way delay from destination to source
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.32
esaProbeHistorySumOfSqOnewayR2PDelay
The sum of square of one-way delay from destination to source
in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.33
esaProbeHistoryMinPosP2RJitter
The minimum positive one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.34
esaProbeHistoryMaxPosP2RJitter
The maximum positive one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.35
esaProbeHistoryNumPosP2RJitter
The total number of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.36
esaProbeHistorySumPosP2RJitter
The total sum of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.37
esaProbeHistorySumOfSqPosP2RJitter
The sum of square of positive one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.38
esaProbeHistoryMinNegP2RJitter
The minimum negative one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.39
esaProbeHistoryMaxNegP2RJitter
The maximum negative one-way jitter from source to
destination in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.40
esaProbeHistoryNumNegP2RJitter
The total number of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.41
esaProbeHistorySumNegP2RJitter
The total sum of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.42
esaProbeHistorySumOfSqNegP2RJitter
The sum of square of negative one-way jitters from source to
destination in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.43
esaProbeHistoryMinPosR2PJitter
The minimum positive one-way jitter from destination to source
in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.44
esaProbeHistoryMaxPosR2PJitter
The maximum positive one-way jitter from destination to
source in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.45
esaProbeHistoryNumPosR2PJitter
The total number of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.46
esaProbeHistorySumPosR2PJitter
The total sum of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.47
esaProbeHistorySumOfSqPosR2PJitter
The sum of square of positive one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.48
esaProbeHistoryMinNegR2PJitter
The minimum negative one-way jitter from destination to source
in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.49
esaProbeHistoryMaxNegR2PJitter
The maximum negative one-way jitter from destination to
source in the current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.50
esaProbeHistoryNumNegR2PJitter
The total number of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.51
esaProbeHistorySumNegR2PJitter
The total sum of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.52
esaProbeHistorySumOfSqNegR2PJitter
The sum of square of negative one-way jitters from destination to
source in the current interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.53
esaProbeHistoryY1731P2RNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts are non-zero then
there could be some k…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.54
esaProbeHistoryY1731R2PNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these counts are non-zero then
there could be som…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.55
esaProbeHistoryY1731RxLmSamples
This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by the user
to differentiate between valid…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.56
esaProbeHistoryY1731RxDmSamples
This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.57
esaProbeHistoryY1731P2RFrames
This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector). Based
on the configuration the MEP co…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.58
esaProbeHistoryY1731R2PFrames
This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe). Based
on the configuration the MEP co…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.59
esaProbeHistoryAvgAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.60
esaProbeHistoryAvgAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.61
esaProbeHistoryMinAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.62
esaProbeHistoryMinAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.63
esaProbeHistoryMaxAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.64
esaProbeHistoryMaxAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.8.1.65
esaProbeHistoryNumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.66
esaProbeHistoryNumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.67
esaProbeHistorySumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.68
esaProbeHistorySumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.69
esaProbeHistorySumOfSqAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.70
esaProbeHistorySumOfSqAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.8.1.71

esaProbeDistStatsConfigTable

table
.1.3.6.1.4.1.2544.1.12.8.1.9 · 1 row entry · 14 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeDistStatsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeDistStatsConfigTable' 
A list of entries that need to be configured
in order to obtain statistical distribution
of ESA Probe collected data.
esaProbeDistStatsConfigEntry row .1.3.6.1.4.1.2544.1.12.8.1.9.1
A row in the esaProbeDistStatsConfigTable.
Indexes
Column Syntax OID
esaProbeDistStatsConfigIndex
A unique index for each row. Each row corresponds to each enumeration
type specified in EsaProbeDistStatsType.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.1
esaProbeDistStatsConfigType
Indicates whether the statistical distribution
is for round-trip delay (rt-delay), one-way probe to reflector
delay (oneway-p2rdelay), one-way reflector to probe delay(oneway-r2pdelay),
probe to reflector jitter (oneway…
EsaProbeDistStatsType
Type Values:
1roundtrip-delay
2oneway-p2r-delay
3oneway-r2p-delay
4oneway-p2r-jitter
5oneway-r2p-jitter
6oneway-p2r-absjitter
7oneway-r2p-absjitter
8roundtrip-absjitter
9oneway-p2r-fdr
10oneway-r2p-fdr
11roundtrip-fdr
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.2
esaProbeDistStatsConfigMinVal
Minimum sample value in distribution.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.3
esaProbeDistStatsConfigMaxVal
Maximum sample value in distribution.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.4
esaProbeDistStatsConfigNumBins
Number of distribution bins.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.5
esaProbeDistStatsConfigLowBoundOfBin1
The lower bound of the 1st bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.6
esaProbeDistStatsConfigLowBoundOfBin2
The lower bound of the 2nd bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.7
esaProbeDistStatsConfigLowBoundOfBin3
The lower bound of the 3rd bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.8
esaProbeDistStatsConfigLowBoundOfBin4
The lower bound of the 4th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.9
esaProbeDistStatsConfigLowBoundOfBin5
The lower bound of the 5th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.10
esaProbeDistStatsConfigLowBoundOfBin6
The lower bound of the 6th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.11
esaProbeDistStatsConfigLowBoundOfBin7
The lower bound of the 7th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.12
esaProbeDistStatsConfigLowBoundOfBin8
The lower bound of the 8th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.13
esaProbeDistStatsConfigLowBoundOfBin9
The lower bound of the 9th bin.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.9.1.14

esaProbeDistStatsTable

table
.1.3.6.1.4.1.2544.1.12.8.1.10 · 1 row entry · 7 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeDistStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeDistStatsTable' 
A list of entries that provide statistical distribution
of ESA Probe collected data.
esaProbeDistStatsEntry row .1.3.6.1.4.1.2544.1.12.8.1.10.1
A row in the esaProbeDistStatsTable.
Indexes
Column Syntax OID
esaProbeDistStatsDestinationIndex
An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.10.1.1
esaProbeDistStatsCOSIndex
An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.10.1.2
esaProbeDistStatsAction
Allows the Manager to clear the bin.
CM-COMMON-MIBCmPmBinActionr/w
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.8.1.10.1.3
esaProbeDistStatsCOS
The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported.
CM-COMMON-MIBClassOfServiceType
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.10.1.4
esaProbeDistStatsNumBins
Number of bins over which the statistical
data is distributed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.10.1.5
esaProbeDistStatsLTMin
Number of sample data points which are
less than the minimum value specified.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.10.1.6
esaProbeDistStatsGTMax
Number of sample data points which are
greater than the maximum value specified.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.10.1.7

esaProbeDistStatsBinTable

table
.1.3.6.1.4.1.2544.1.12.8.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeDistStatsBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeDistStatsBinTable' 
A list of entries that provide statistical distribution
of ESA Probe collected data for specific BINs.
esaProbeDistStatsBinEntry row .1.3.6.1.4.1.2544.1.12.8.1.11.1
A row in the esaProbeDistStatsBinTable.
Indexes
Column Syntax OID
esaProbeDistStatsBinIndex
An index for each row that uniquely provides statistical
data for a range.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.1.12.8.1.11.1.1
esaProbeDistStatsBinLower
The lower limit of values collected in this bin.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.11.1.2
esaProbeDistStatsBinUpper
The upper limit of values collected in this bin.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.11.1.3
esaProbeDistStatsBinNumSamples
Number of sample data points which fall between
the lower and upper limits.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.11.1.4

esaProbeDistHistoryTable

table
.1.3.6.1.4.1.2544.1.12.8.1.12 · 1 row entry · 9 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeDistHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeDistHistoryTable' 
A list of entries that provide statistical distribution
history of ESA Probe collected data.
esaProbeDistHistoryEntry row .1.3.6.1.4.1.2544.1.12.8.1.12.1
A row in the esaProbeDistHistoryTable.
Indexes
Column Syntax OID
esaProbeDistHistoryDestinationIndex
An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point SLA
is supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.1
esaProbeDistHistoryCOSIndex
An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe parameters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.2
esaProbeDistHistoryIndex
An arbitrary integer index value used to uniquely identify
this ESA Probe Distribution History entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.3
esaProbeDistHistoryTime
Indicates the time of history bin creation.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.4
esaProbeDistHistoryAction
Allows the Manager to clear the bin.
CM-COMMON-MIBCmPmBinActionr/w
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.5
esaProbeDistHistoryCOS
The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported.
CM-COMMON-MIBClassOfServiceType
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.6
esaProbeDistHistoryNumBins
Number of bins over which the statistical
data is distributed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.12.1.7
esaProbeDistHistoryLTMin
Number of sample data points which are
less than the minimum value specified.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.12.1.8
esaProbeDistHistoryGTMax
Number of sample data points which are
greater than the maximum value specified.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.12.1.9

esaProbeDistHistoryBinTable

table
.1.3.6.1.4.1.2544.1.12.8.1.13 · 1 row entry · 4 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeDistHistoryBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeDistHistoryBinTable' 
A list of entries that provide historical statistical distribution
of ESA Probe collected data for specific BINs.
esaProbeDistHistoryBinEntry row .1.3.6.1.4.1.2544.1.12.8.1.13.1
A row in the esaProbeDistHistoryBinTable.
Indexes
Column Syntax OID
esaProbeDistHistoryBinIndex
An index for each row that uniquely provides statistical
data for a range.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.1.12.8.1.13.1.1
esaProbeDistHistoryBinLower
The lower limit of values collected in this bin.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.13.1.2
esaProbeDistHistoryBinUpper
The upper limit of values collected in this bin.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.13.1.3
esaProbeDistHistoryBinNumSamples
Number of sample data points which fall between
the lower and upper limits.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.13.1.4

esaProbeStatsThresholdTable

table
.1.3.6.1.4.1.2544.1.12.8.1.14 · 1 row entry · 5 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeStatsThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeStatsThresholdTable' 
A table of entries that allow manageability of ESA
Probe Thresholds.
esaProbeStatsThresholdEntry row .1.3.6.1.4.1.2544.1.12.8.1.14.1
A conceptual row in the esaProbeStatsThresholdTable.
Indexes
Column Syntax OID
esaProbeStatsThresholdIndex
An index that uniquely identifies an entry in the
esaProbeStatsThresholdTable.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.1.12.8.1.14.1.1
esaProbeStatsThresholdVariable
The object identifier of the particular variable to be
sampled. Objects of the esaProbeStatsTable table are
monitored. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, P…
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.14.1.2
esaProbeStatsThresholdAbsValueLo
Lower 32 bits of the absolute value of the threshold.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.14.1.3
esaProbeStatsThresholdAbsValueHi
Higher 32 bits of the absolute value of the threshold.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.14.1.4
esaProbeStatsThresholdMonValue
Monitored value corresponding to esaProbeStatsThresholdVariable.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.14.1.5

esaProbeCOSConfigTable

table
.1.3.6.1.4.1.2544.1.12.8.1.15 · 1 row entry · 11 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeCOSConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeCOSConfigTable' 
A list of entries corresponding to ESA Probes COS Configuration Levels.
esaProbeCOSConfigEntry row .1.3.6.1.4.1.2544.1.12.8.1.15.1
A row in the esaProbeCOSConfigTable. Entries can
be created in this table by management application action.
Indexes
Column Syntax OID
esaProbeCOSConfigIndex
An integer index value used to uniquely identify
SLA (Service Level Agreement) for a specific Class of Service.
Index 1 is associated with cos-0, index 2 with cos-1, index 3 with cos-2 and so on.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.1
esaProbeCOSConfigType
This is the Class of Service Type for Y.1731/SLM-SLR Probes, associated with the row.
CM-COMMON-MIBClassOfServiceTyper/w
Type Values:
0cos-not-applicable
1cos-zero
2cos-one
3cos-two
4cos-three
5cos-four
6cos-five
7cos-six
8cos-seven
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.2
esaProbeCOSConfigInterval
This is the Class of Service Y.1731/SLM-SLR packet interval type.
EsaProbePktIntervalTyper/w
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.3
esaProbeCOSConfigPktSize
This is the Class of Service Y.1731/SLM-SLR Packet Size.
This object enables specification of the TLV size for
Delay Measurement Measures(DMMs) as well as Synthetic Loss Measurement Frames (SLMs).
Integer32r/w
Constraints:
range: 64-9612
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.4
esaProbeCOSConfigStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.5
esaProbeCOSConfigRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.6
esaProbeCOSConfigslmInterval
This allows specification of the interval between subsequent SLM packets.
EsaProbePktIntervalTyper/w
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.7
esaProbeCOSConfigslmPktSize
This allows specification of the SLM Packet Size.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.8
esaProbeCOSConfigSoamPmExtAvailFlrThreshold
Frame loss ratio threshold for Availability (m%).
Unsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.9
esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus
This is the number of loss measurement PDUs.
delta_t is this attribute multiplied by the
loss measurement message period.
For example, if SLM message period is
100ms and this attribute is 10,
then the delta_t is 1s…
Unsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.10
esaProbeCOSConfigSoamPmExtConDeltaTsForAvail
This is the number of consecutive delta_ts used
in the computation of availability/unavailability (n).
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2544.1.12.8.1.15.1.11

esaProbeMultiDestinationTable

table
.1.3.6.1.4.1.2544.1.12.8.1.16 · 1 row entry · 6 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk esaProbeMultiDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::esaProbeMultiDestinationTable' 
A list of entries corresponding to ESA Probes Multi Destinations.
esaProbeMultiDestinationEntry row .1.3.6.1.4.1.2544.1.12.8.1.16.1
A row in the esaProbeMultiDestinationTable. Entries can
be created in this table by management application action. Entries in this table
represent destinations in a point-to-multipoint ESA Probe.
Indexes
Column Syntax OID
esaProbeDestinationIndex
An integer index value used to uniquely identify
a destination.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.1
esaProbeDestinationMepType
This attribute is applicable only for point-to-multipoint probes.
This indicates if the destination MEP is specified using the MEP ID object
esaProbeDestinationMepId.
CM-COMMON-MIBMepDestinationTyper/w
Type Values:
0not-applicable
1mepid
2macaddress
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.2
esaProbeDestinationMepMacAddr
This attribute is applicable only for point-to-multipoint probes.
It identifies the destination MEP. This MAC address will be the
destination MAC address for frames if esaProbeDestinationMepType is 'macaddress'.
If …
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.3
esaProbeDestinationMepId
This attribute is applicable only for point-to-multipoint probes.
It identifies the destination MEP. The MAC
address of this RMEP ID from RMEP database will be the destination
MAC address. This value is used only if th…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.4
esaProbeDestinationStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.5
esaProbeDestinationRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.8.1.16.1.6

bertControlTable

table
.1.3.6.1.4.1.2544.1.12.8.1.17 · 1 row entry · 7 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk bertControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::bertControlTable' 
A list of entries for the control of BERT Streams.
bertControlEntry row .1.3.6.1.4.1.2544.1.12.8.1.17.1
A conceptual row in the bertControlTable.
Indexes
Column Syntax OID
bertControlIndex
An arbitrary integer index value used to uniquely identify
this BERT Control.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.1
bertControlSourceEntity
Pointer to the entity on which the BERT
will be started within a card.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.2
bertControlTestMode
The mode of BERT to be performed.
BerTestModer/w
Type Values:
0not-applicable
1generator
2monitor
3singleend
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.3
bertControlDuration
This object enables specification of the time in seconds
for BERT. BERT will be stopped
after the specified time interval is exhausted.
Integer32r/w
Constraints:
range: 0-259200
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.4
bertControlStream
This object specifies which stream should be included in the
BERT execution. Value of 0 indicates that no streams is selected
by bertControlStream. Non 0 value indicates the
selected BERT stream.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.5
bertControlAction
This object enables starting/stopping of traffic generation
as well as resetting of monitored streams. This object may
not be specified at configuration creation time - in this
case it will take the value of `none'. Th…
BertControlActionr/w
Type Values:
0not-applicable
1start
2stop
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.6
bertControlTestStatus
This object reflects the current status of test set configuration
entry. Upon creation, the status has a value of `initial'; the
status changes to `in-progress' upon ecpaControlAction
indicating `start'; the status chan…
BerTestStatus
Type Values:
0not-applicable
1running
2not-running
 .1.3.6.1.4.1.2544.1.12.8.1.17.1.7

bertConfigStreamTable

table
.1.3.6.1.4.1.2544.1.12.8.1.18 · 1 row entry · 8 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk bertConfigStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::bertConfigStreamTable' 
A list of entries for the configuration of BERT Config Stream Specifications.
bertConfigStreamEntry row .1.3.6.1.4.1.2544.1.12.8.1.18.1
A conceptual row in the bertConfigStreamTable.
Indexes
Column Syntax OID
bertConfigStreamIndex
An arbitrary integer index value used to uniquely identify
this BERT configStream.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.1
bertConfigStreamName
Symbolic Stream Name that can be associated with an BERT Config stream.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.2
bertConfigStreamTxPattern
Allows specification of the Tx pattern of this BERT Config stream.
BertPatternr/w
Type Values:
0not-applicable
1all-0
2all-1
3alt-1100
4bit-1in8
5bit-3in24
6bit-2exp20-qrss
7bit-2exp11-prbs
8bit-2exp15-prbs
9bit-2exp23-prbs
10userdefined
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.3
bertConfigStreamErrInjectEnabled
This object allows specification of whether Bit Error be injected.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.4
bertConfigStreamErrInjectRate
Bit Error Rate, applicable when Error Injection is enabled.
CM-FACILITY-MIBBitErrRater/w
Type Values:
0none
1ber-1e-1
2ber-1e-2
3ber-1e-3
4ber-1e-4
5ber-1e-5
6ber-1e-6
7ber-1e-7
8ber-1e-8
9ber-1e-9
10ber-1e-10
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.5
bertConfigStreamErrInjectRateMultiplier
BER value with 0.1 Step, in this release is fixed 10,
only applicable when Error Injection is enabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.6
bertConfigStreamUserPatternLength
User defined testing pattern length.
BertUserPatternLengthr/w
Type Values:
0not-applicable
1length-1byte
2length-2byte
3length-3byte
4length-4byte
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.7
bertConfigStreamUserPattern
User defined testing pattern in a HEX format display string,
applicable when test pattern is user defined.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2544.1.12.8.1.18.1.8

bertTestStreamTable

table
.1.3.6.1.4.1.2544.1.12.8.1.19 · 1 row entry · 26 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk bertTestStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::bertTestStreamTable' 
A list of entries containing results of a previous test.
bertTestStreamEntry row .1.3.6.1.4.1.2544.1.12.8.1.19.1
A conceptual row in the bertTestStreamTable. Entries in this
table show results of the current BERT.
Indexes
Column Syntax OID
bertTestStreamIndex
An integer index value corresponding to the stream index
for which the BERT was initiated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.1
bertTestStreamName
Symbolic Stream Name that can be associated with an BERT stream.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.2
bertTestStreamTxPattern
Allows specification of the Tx pattern of this BERT Test stream.
BertPattern
Type Values:
0not-applicable
1all-0
2all-1
3alt-1100
4bit-1in8
5bit-3in24
6bit-2exp20-qrss
7bit-2exp11-prbs
8bit-2exp15-prbs
9bit-2exp23-prbs
10userdefined
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.3
bertTestStreamErrInjectEnabled
This object allows specification of whether Bit Error be injected.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.4
bertTestStreamErrInjectRate
Bit Error Rate, applicable when Error Injection is enabled.
CM-FACILITY-MIBBitErrRate
Type Values:
0none
1ber-1e-1
2ber-1e-2
3ber-1e-3
4ber-1e-4
5ber-1e-5
6ber-1e-6
7ber-1e-7
8ber-1e-8
9ber-1e-9
10ber-1e-10
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.5
bertTestStreamErrInjectRateMultiplier
BER value with 0.1 Step, in this release is fixed 10,
only applicable when Error Injection is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.6
bertTestStreamUserPatternLength
User defined testing pattern length.
BertUserPatternLength
Type Values:
0not-applicable
1length-1byte
2length-2byte
3length-3byte
4length-4byte
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.7
bertTestStreamUserPattern
User defined testing pattern in a HEX format display string,
applicable when test pattern is user defined.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.8
bertTestStreamMonStartTime
The start time of the BERT for this stream.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.9
bertTestStreamMonEndTime
The end time of the BERT for this stream.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.10
bertTestStreamMonElapsedTime
The elapsed time of BERT for this stream in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.11
bertTestStreamMonSyncState
The Sync State of the BERT.
BertSyncState
Type Values:
0not-applicable
1sync
2outofsync
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.12
bertTestStreamMonRxPattern
Allows specification of the Rx pattern of this BERT Test stream.
BertPattern
Type Values:
0not-applicable
1all-0
2all-1
3alt-1100
4bit-1in8
5bit-3in24
6bit-2exp20-qrss
7bit-2exp11-prbs
8bit-2exp15-prbs
9bit-2exp23-prbs
10userdefined
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.13
bertTestStreamMonSyncCounts
Allows specification of the Sync counts from test start.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.14
bertTestStreamMonRxBitErrsSinceStart
Allows specification of the Received Errors since test start.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.19.1.15
bertTestStreamMonRxBitsSinceStart
Allows specification of the Received Bits since test start.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.19.1.16
bertTestStreamMonRxESsSinceStart
Allows specification of the Error seconds since test start.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.17
bertTestStreamMonRxErrRateSinceStart
Allows specification of the Received BER Unit since test start.
CM-FACILITY-MIBBitErrRate
Type Values:
0none
1ber-1e-1
2ber-1e-2
3ber-1e-3
4ber-1e-4
5ber-1e-5
6ber-1e-6
7ber-1e-7
8ber-1e-8
9ber-1e-9
10ber-1e-10
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.18
bertTestStreamMonRxErrRateMultiplierSinceStart
Allows specification of the Received BER value with 0.1 Step since test start.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.19
bertTestStreamMonRxBitErrsSinceLastSync
Allows specification of the Received Errors since last sync.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.19.1.20
bertTestStreamMonRxBitsSinceLastSync
Allows specification of the Received Bits since last sync.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.19.1.21
bertTestStreamMonRxESsSinceLastSync
Allows specification of the Received Error seconds since last sync.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.22
bertTestStreamMonRxErrRateSinceLastSync
Allows specification of the Received BER Unit since last sync.
CM-FACILITY-MIBBitErrRate
Type Values:
0none
1ber-1e-1
2ber-1e-2
3ber-1e-3
4ber-1e-4
5ber-1e-5
6ber-1e-6
7ber-1e-7
8ber-1e-8
9ber-1e-9
10ber-1e-10
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.23
bertTestStreamMonRxErrRateMultiplierSinceLastSync
Allows specification of the Received BER value with 0.1 Step since last sync.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.24
bertTestStreamConfigChangedFlag
This object provides information on whether the associated bertConfigStream is changed.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.25
bertTestStreamMonOOSSsSinceStart
This object means the Out of Sync Seconds since start.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.8.1.19.1.26

f3EsaProbeCOSConfigSoamPmExtTable

table
.1.3.6.1.4.1.2544.1.12.8.1.20 · 1 row entry · 3 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3EsaProbeCOSConfigSoamPmExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::f3EsaProbeCOSConfigSoamPmExtTable' 
A list of entries corresponding to ESA Probe Cos Configurations MEF 35.
f3EsaProbeCOSConfigSoamPmExtEntry row .1.3.6.1.4.1.2544.1.12.8.1.20.1
A row in the esaProbeCOSConfigTable MEF 35. Entries can
be created in this table by management application action.
Indexes
No indexes recorded
Column Syntax OID
f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold
Frame loss ratio threshold for Availability (m%).
Unsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2544.1.12.8.1.20.1.1
f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus
This is the number of loss measurement PDUs.
delta_t is this attribute multiplied by the
loss measurement message period.
For example, if SLM message period is
100ms and this attribute is 10,
then the delta_t is 1s…
Unsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.2544.1.12.8.1.20.1.2
f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail
This is the number of consecutive delta_ts used
in the computation of availability/unavailability (n).
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2544.1.12.8.1.20.1.3

f3EsaProbeStatsSoamPmExtTable

table
.1.3.6.1.4.1.2544.1.12.8.1.21 · 1 row entry · 38 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3EsaProbeStatsSoamPmExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::f3EsaProbeStatsSoamPmExtTable' 
A collection of ESA Probe MEF 35 related statistics kept for
a particular ESA Probe entity. These reflect the
current data.
f3EsaProbeStatsSoamPmExtEntry row .1.3.6.1.4.1.2544.1.12.8.1.21.1
A conceptual row in the f3EsaProbeStatsSoamPmExtTable.
Indexes
No indexes recorded
Column Syntax OID
f3EsaProbeStatsSoamPmExtMinP2RFlr
This is the minimum probe to reflector FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.1
f3EsaProbeStatsSoamPmExtMaxP2RFlr
This is the maximum probe to reflector FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.2
f3EsaProbeStatsSoamPmExtAvgP2RFlr
This is the average probe to reflector FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.3
f3EsaProbeStatsSoamPmExtMinR2PFlr
This is the minimum reflector to probe FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.4
f3EsaProbeStatsSoamPmExtMaxR2PFlr
This is the maximum reflector to probe FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.5
f3EsaProbeStatsSoamPmExtAvgR2PFlr
This is the average reflector to probe FLR (m%).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.6
f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs
This is the number of delta_ts in which the FLR is greater
than availability threshold in the probe to reflector direction.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.7
f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs
This is the number of delta_ts in which the FLR is greater
than availability threshold in the reflector to probe direction.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.8
f3EsaProbeStatsSoamPmExtP2rAvailableTime
This is the probe to reflector available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availabilit…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.9
f3EsaProbeStatsSoamPmExtR2PAvailableTime
This is the reflector to probe available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availabilit…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.10
f3EsaProbeStatsSoamPmExtP2rUnavailableTime
This is the probe to reflector unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availabi…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.11
f3EsaProbeStatsSoamPmExtR2PUnavailableTime
This is the reflector to probe unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availabi…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.12
f3EsaProbeStatsSoamPmExtMinAbsRTJitter
Minimum absolute round-trip (two-way) jitter in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.13
f3EsaProbeStatsSoamPmExtMaxAbsRTJitter
Maximum absolute round-trip (two-way) jitter in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.14
f3EsaProbeStatsSoamPmExtAvgAbsRTJitter
Average absolute round-trip (two-way) jitter in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.15
f3EsaProbeStatsSoamPmExtNumAbsRTJitter
Number of absolute round-trip (two-way) jitter samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.16
f3EsaProbeStatsSoamPmExtSumAbsRTJitter
Sum of absolute round-trip (two-way) jitter samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.17
f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter
Sum of squares of absolute round-trip (two-way) jitter samples (microseconds^2).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.18
f3EsaProbeStatsSoamPmExtMaxP2RFDR
Maximum P2R (Forward) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.19
f3EsaProbeStatsSoamPmExtAvgP2RFDR
Average P2R (Forward) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.20
f3EsaProbeStatsSoamPmExtNumP2RFDR
Number of P2R (Forward) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.21
f3EsaProbeStatsSoamPmExtSumP2RFDR
Sum of P2R (Forward) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.22
f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR
Sum of squares of P2R (Forward) FDR samples (microseconds^2).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.23
f3EsaProbeStatsSoamPmExtMaxR2PFDR
Maximum R2P (Backward) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.24
f3EsaProbeStatsSoamPmExtAvgR2PFDR
Average R2P (Backward) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.25
f3EsaProbeStatsSoamPmExtNumR2PFDR
Number of R2P (Backward) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.26
f3EsaProbeStatsSoamPmExtSumR2PFDR
Sum of R2P (Backward) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.27
f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR
Sum of squares of R2P (Backward) FDR samples (microseconds^2).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.28
f3EsaProbeStatsSoamPmExtMaxRTFDR
Maximum round-trip (two-way) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.29
f3EsaProbeStatsSoamPmExtAvgRTFDR
Average round-trip (two-way) FDR in a measurement interval (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.30
f3EsaProbeStatsSoamPmExtNumRTFDR
Number of round-trip (two-way) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.31
f3EsaProbeStatsSoamPmExtSumRTFDR
Sum of round-trip (two-way) FDR samples (microseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.32
f3EsaProbeStatsSoamPmExtSumOfSqRTFDR
Sum of squares of round-trip (two-way) FDR samples (microseconds^2).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.33
f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs
Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.34
f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs
Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.35
f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs
Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.36
f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs
Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.37
f3EsaProbeStatsSoamPmExtElapsedTime
The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.21.1.38

f3EsaProbeHistorySoamPmExtTable

table
.1.3.6.1.4.1.2544.1.12.8.1.22 · 1 row entry · 38 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3EsaProbeHistorySoamPmExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-SA-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-SA-MIB::f3EsaProbeHistorySoamPmExtTable' 
A collection of ESA Probe MEF 35 related history kept for
a particular ESA Probe entity. These reflect the
history data.
f3EsaProbeHistorySoamPmExtEntry row .1.3.6.1.4.1.2544.1.12.8.1.22.1
A conceptual row in the f3EsaProbeHistorySoamPmExtTable.
Indexes
No indexes recorded
Column Syntax OID
f3EsaProbeHistorySoamPmExtMinP2RFlr
This is the minimum probe to reflector FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.1
f3EsaProbeHistorySoamPmExtMaxP2RFlr
This is the maximum probe to reflector FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.2
f3EsaProbeHistorySoamPmExtAvgP2RFlr
This is the average probe to reflector FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.3
f3EsaProbeHistorySoamPmExtMinR2PFlr
This is the minimum reflector to probe FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.4
f3EsaProbeHistorySoamPmExtMaxR2PFlr
This is the maximum reflector to probe FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.5
f3EsaProbeHistorySoamPmExtAvgR2PFlr
This is the average reflector to probe FLR.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.6
f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs
This is the number of delta_ts in which the FLR is greater
than availability threshold in the probe to reflector direction.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.7
f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs
This is the number of delta_ts in which the FLR is greater
than availability threshold in the reflector to probe direction.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.8
f3EsaProbeHistorySoamPmExtP2rAvailableTime
This is the probe to reflector available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availabilit…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.9
f3EsaProbeHistorySoamPmExtR2PAvailableTime
This is the reflector to probe available delta_ts which begins to increment
when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is greater than availabilit…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.10
f3EsaProbeHistorySoamPmExtP2rUnavailableTime
This is the probe to reflector unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availabi…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.11
f3EsaProbeHistorySoamPmExtR2PUnavailableTime
This is the reflector to probe unavailable delta_ts which begins to increment
when FLR is greater than availability threshold for 'n' consecutive delta_ts.
It is incremented until FLR is less than or equal to availabi…
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.12
f3EsaProbeHistorySoamPmExtMinAbsRTJitter
Minimum absolute round-trip (two-way) jitter in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.13
f3EsaProbeHistorySoamPmExtMaxAbsRTJitter
Maximum absolute round-trip (two-way) jitter in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.14
f3EsaProbeHistorySoamPmExtAvgAbsRTJitter
Average absolute round-trip (two-way) jitter in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.15
f3EsaProbeHistorySoamPmExtNumAbsRTJitter
Number of absolute round-trip (two-way) jitter samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.16
f3EsaProbeHistorySoamPmExtSumAbsRTJitter
Sum of absolute round-trip (two-way) jitter samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.17
f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter
Sum of squares of absolute round-trip (two-way) jitter samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.18
f3EsaProbeHistorySoamPmExtMaxP2RFDR
Maximum P2R (Forward) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.19
f3EsaProbeHistorySoamPmExtAvgP2RFDR
Average P2R (Forward) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.20
f3EsaProbeHistorySoamPmExtNumP2RFDR
Number of P2R (Forward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.21
f3EsaProbeHistorySoamPmExtSumP2RFDR
Sum of P2R (Forward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.22
f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR
Sum of squares of P2R (Forward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.23
f3EsaProbeHistorySoamPmExtMaxR2PFDR
Maximum R2P (Backward) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.24
f3EsaProbeHistorySoamPmExtAvgR2PFDR
Average R2P (Backward) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.25
f3EsaProbeHistorySoamPmExtNumR2PFDR
Number of R2P (Backward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.26
f3EsaProbeHistorySoamPmExtSumR2PFDR
Sum of R2P (Backward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.27
f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR
Sum of squares of R2P (Backward) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.28
f3EsaProbeHistorySoamPmExtMaxRTFDR
Maximum round-trip (two-way) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.29
f3EsaProbeHistorySoamPmExtAvgRTFDR
Average round-trip (two-way) FDR in a measurement interval.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.30
f3EsaProbeHistorySoamPmExtNumRTFDR
Number of round-trip (two-way) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.31
f3EsaProbeHistorySoamPmExtSumRTFDR
Sum of round-trip (two-way) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.32
f3EsaProbeHistorySoamPmExtSumOfSqRTFDR
Sum of squares of round-trip (two-way) FDR samples.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.33
f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs
Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.34
f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs
Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.35
f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs
Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.36
f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs
Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.37
f3EsaProbeHistorySoamPmExtElapsedTime
The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds).
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.8.1.22.1.38