CISCO-WIRELESS-P2MP-LINK-METRICS-MIB Table View

This table contains the precision and scale values to
be used when interpreting fixed point values in this
MIB.  This information is encapsulated in a table to
accomodate for multiple cards in the same system having
different precision values.
This table is indexed by the ifIndex for the physical 
card (propDocsWirelessMaclayer).  The user can refer to 
the entAliasMappingTable in the ENTITY-MIB to determine 
the upstream/downstream channels associated with 
each card.

This table contains threshold values that are the
trigger points for controlling the collection of the
Link Metrics such as Codeword Errored Seconds and 
others.

This table contains metrics collected over the duration
of one second.
          
This table will have a maximum of 60 entries providing 
cumulative status of the link, identified by ifIndex of 
propDocsWirelessDownstream, over the past one minute.
          
This table is updated once every second.  After 60 
seconds, only the latest 60 entries will be stored in 
the table.

This table contains metrics collected over the duration
of one minute.
          
This table will have a maximum of 60 entries providing 
cumulative statistics of the link, identified by ifIndex
of propDocsWirelessDownstream, over the past one hour.
          
This table is updated once every minute.

This table contains metrics collected over the duration
of one hour.
          
This table will have a maximum of 24 entries providing 
cumulative status of the link, identified by ifIndex, 
over the past 24 hours.
          
This table is updated once every hour.

This table contains metrics used to measure the quality
of the radio link identified by the ifIndex. The metrics
in this table are cumulated since the last Link Admin Up
time.

This table contains thresholds that are the trigger
points to determine if an excessive number of errored 
codewords are being transmitted.
          
The thresholds can be set for each upstream channel.  
This helps determine if a particular upstream channel is
experiencing excessive errors.
          
The thresholds can also be set for all the subscriber 
units communicating with the head end.  These thresholds
will not be set on a per subscriber basis.  Instead, 
there is only one entry in this table for all the 
subscriber units.

This table lists all the subscriber units who have
either failed to transmit a minimum number of codewords
in an operational hour OR have transmitted a total 
number of codewords equal to or greater than 
p2mpHe1HrMinTotalCWThresh but have a codeword error 
percentage (ratio of errored codewords to the total 
number of codewords transmitted) greater than 
p2mpHe1HrPctErrCWThresh.

This table contains codeword error history for the past 24
hours, at 1 hour intervals, on a per subscriber basis.
          
This table will have a maximum of 24 entries providing 
cumulative status of the link, identified by ifIndex, over the 
past 24 hours.
          
This table is updated once every hour.

This table contains metrics collected over the duration
of one second.
          
This table will have a maximum of 60 entries providing 
cumulative status of the upstream channel, identified by
ifIndex of propDocsWirelessUpstream, over the past one
minute.
          
This table is updated once every second.

This table contains metrics collected over the duration
of one minute.
          
This table will have a maximum of 60 entries providing 
cumulative status of the upstream channel, identified by
ifIndex of propDocsWirelessUpstream, over the past one 
hour.
          
This table is updated once every minute.

This table contains metrics collected over the duration
of one hour.
          
This table will have a maximum of 24 entries providing 
cumulative status of the upstream channel, identified by
ifIndex of propDocsWirelessUpstream, over the past 24 
hours.
          
This table is updated once every hour.