CISCO-WIRELESS-P2MP-LINK-METRICS-MIB
This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface link metrics
specification.
Glossary
The following terms are used in the MIB definitions below.
Radio Interface: The interface that provides wireless communication
features.
Radio Link: The bi-directional wireless link between two
communicating wireless radios.
Radio PHY: Represents the transmission characteristics of the
Radio link.
Link Admin Up: This is the system time when the link is configured
to be 'administratively up'. The user can configure
the link to be up either by executing a 'no shut'
command via the CLI or by setting the ifAdminStatus
object in the IF-MIB to 'up(1)' via SNMP.
Cisco Wireless MIB Organization
The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
divided into 2 main groups.
Head End: These objects are supported on the Head End only.
Subscriber Unit: These objects are supported on the Subscriber
unit only.
- Source file
CISCO-WIRELESS-P2MP-LINK-METRICS-MIB- Last revised
- Identity
ciscoWirelessLinkMetricsMIB- Base OID
1.3.6.1.4.1.9.9.181
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-WIRELESS-TC-MIB | CwrCwConsecutiveSevErrSecond CwrCwDegradedSecond CwrCwErroredSecond CwrCwErrorFreeSecond CwrCwSeverelyErroredSecond CwrFixedPointPrecision CwrFixedPointScale CwrFixedPointValue CwrPercentageValue CwrUpdateTime WirelessGauge64 |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress TimeInterval |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WIRELESS-P2MP-LINK-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::ciscoWirelessLinkMetricsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WIRELESS-P2MP-LINK-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::ciscoWirelessLinkMetricsMIB'
Objects (131)
Showing 131 of 131 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.181 |
||
.1.3.6.1.4.1.9.9.181.1 |
||
.1.3.6.1.4.1.9.9.181.1.1 |
||
.1.3.6.1.4.1.9.9.181.1.1.1 |
||
.1.3.6.1.4.1.9.9.181.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.181.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.181.1.2 |
||
.1.3.6.1.4.1.9.9.181.1.2.0 |
||
.1.3.6.1.4.1.9.9.181.2 |
||
.1.3.6.1.4.1.9.9.181.2.1 |
||
.1.3.6.1.4.1.9.9.181.2.1.1 |
||
.1.3.6.1.4.1.9.9.181.2.1.1.1 |
||
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.1.1.2 |
|
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.1.1.3 |
|
.1.3.6.1.4.1.9.9.181.2.1.1.4 |
||
.1.3.6.1.4.1.9.9.181.2.1.1.5 |
||
.1.3.6.1.4.1.9.9.181.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.181.2.1.1.7 |
||
.1.3.6.1.4.1.9.9.181.2.1.1.8 |
||
.1.3.6.1.4.1.9.9.181.2.2 |
||
.1.3.6.1.4.1.9.9.181.2.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.2.2.1.1 |
|
.1.3.6.1.4.1.9.9.181.2.2.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.181.2.2.1.3 |
|
.1.3.6.1.4.1.9.9.181.2.2.1.4 |
||
.1.3.6.1.4.1.9.9.181.2.2.1.5 |
||
.1.3.6.1.4.1.9.9.181.2.2.1.6 |
||
.1.3.6.1.4.1.9.9.181.2.3 |
||
.1.3.6.1.4.1.9.9.181.2.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.2.3.1.1 |
|
.1.3.6.1.4.1.9.9.181.2.3.1.10 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.11 |
||
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.12 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.13 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.14 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.15 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.16 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.17 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.18 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.19 |
|
.1.3.6.1.4.1.9.9.181.2.3.1.2 |
||
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.3.1.20 |
|
.1.3.6.1.4.1.9.9.181.2.3.1.3 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.4 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.5 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.6 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.7 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.8 |
||
.1.3.6.1.4.1.9.9.181.2.3.1.9 |
||
.1.3.6.1.4.1.9.9.181.2.4 |
||
.1.3.6.1.4.1.9.9.181.2.4.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.2.4.1.1 |
|
.1.3.6.1.4.1.9.9.181.2.4.1.10 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.11 |
||
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.12 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.13 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.14 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.15 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.16 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.17 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.18 |
|
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.19 |
|
.1.3.6.1.4.1.9.9.181.2.4.1.2 |
||
|
dBm - decibel milliwattsCISCO-WIRELESS-TC-MIBCwrFixedPointValue
|
.1.3.6.1.4.1.9.9.181.2.4.1.20 |
|
.1.3.6.1.4.1.9.9.181.2.4.1.3 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.4 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.5 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.6 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.7 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.8 |
||
.1.3.6.1.4.1.9.9.181.2.4.1.9 |
||
.1.3.6.1.4.1.9.9.181.2.6 |
||
.1.3.6.1.4.1.9.9.181.2.6.1 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.1 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.10 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.11 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.12 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.13 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.14 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.15 |
||
.1.3.6.1.4.1.9.9.181.2.6.1.16 |
||
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.17 |
|
.1.3.6.1.4.1.9.9.181.2.6.1.2 |
||
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.3 |
|
.1.3.6.1.4.1.9.9.181.2.6.1.4 |
||
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.5 |
|
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.6 |
|
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.7 |
|
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.2.6.1.8 |
|
.1.3.6.1.4.1.9.9.181.2.6.1.9 |
||
.1.3.6.1.4.1.9.9.181.3 |
||
.1.3.6.1.4.1.9.9.181.3.1 |
||
.1.3.6.1.4.1.9.9.181.3.1.1 |
||
.1.3.6.1.4.1.9.9.181.3.1.1.1 |
||
|
0.00001 percentCISCO-WIRELESS-TC-MIBCwrPercentageValue
|
.1.3.6.1.4.1.9.9.181.3.1.1.2 |
|
.1.3.6.1.4.1.9.9.181.3.2 |
||
.1.3.6.1.4.1.9.9.181.3.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.3.2.1.1 |
|
.1.3.6.1.4.1.9.9.181.3.2.1.2 |
||
.1.3.6.1.4.1.9.9.181.3.2.1.3 |
||
.1.3.6.1.4.1.9.9.181.3.2.1.4 |
||
.1.3.6.1.4.1.9.9.181.3.2.1.5 |
||
.1.3.6.1.4.1.9.9.181.3.3 |
||
.1.3.6.1.4.1.9.9.181.3.3.1 |
||
.1.3.6.1.4.1.9.9.181.3.3.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.3.3.1.2 |
|
.1.3.6.1.4.1.9.9.181.3.3.1.3 |
||
.1.3.6.1.4.1.9.9.181.3.3.1.4 |
||
.1.3.6.1.4.1.9.9.181.3.3.1.5 |
||
.1.3.6.1.4.1.9.9.181.3.3.1.6 |
||
.1.3.6.1.4.1.9.9.181.3.4 |
||
.1.3.6.1.4.1.9.9.181.3.4.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.3.4.1.1 |
|
.1.3.6.1.4.1.9.9.181.3.4.1.2 |
||
.1.3.6.1.4.1.9.9.181.3.4.1.3 |
||
.1.3.6.1.4.1.9.9.181.3.4.1.4 |
||
.1.3.6.1.4.1.9.9.181.3.5 |
||
.1.3.6.1.4.1.9.9.181.3.5.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.3.5.1.1 |
|
.1.3.6.1.4.1.9.9.181.3.5.1.2 |
||
.1.3.6.1.4.1.9.9.181.3.5.1.3 |
||
.1.3.6.1.4.1.9.9.181.3.5.1.4 |
||
.1.3.6.1.4.1.9.9.181.3.6 |
||
.1.3.6.1.4.1.9.9.181.3.6.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.181.3.6.1.1 |
|
.1.3.6.1.4.1.9.9.181.3.6.1.2 |
||
.1.3.6.1.4.1.9.9.181.3.6.1.3 |
||
.1.3.6.1.4.1.9.9.181.3.6.1.4 |
||
.1.3.6.1.4.1.9.9.181.4 |
||
.1.3.6.1.4.1.9.9.181.4.1 |
||
.1.3.6.1.4.1.9.9.181.4.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-WIRELESS-TC-MIBcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-WIRELESS-P2MP-LINK-METRICS-MIBciscoselected
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.181.4.1.1The compliance statement for devices implementing the
Point to MultiPoint wireless interface compliant to
Cisco Systems Inc. specification.
Point to MultiPoint wireless interface compliant to
Cisco Systems Inc. specification.
Required groups
| mandatory | p2mpComplianceLinkMetricsGroup | |
| optional | p2mpComplianceSuMetricsGroup |
This group is mandatory at the Subscriber Unit. It is not implemented at the Head End. |
| optional | p2mpComplianceHeMetricsGroup |
This group is mandatory at the Head End. It is not implemented at the Subscriber Unit. |
| optional | p2mpComplianceNotifGroup |
Implementation of the notifications specified by this group is optional. |
Notifications / Traps (6)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.181.1.2.0.1 |
The p2mpHe1HrPctErrCWThresh for an upstream channel was
exceeded. |
|
.1.3.6.1.4.1.9.9.181.1.2.0.2 |
The p2mpHe1HrPctErrCWThresh for the subscriber
unit was exceeded. The subscriber unit was added to the p2mpHeBadSuTable. |
|
.1.3.6.1.4.1.9.9.181.1.2.0.3 |
The p2mpSuLink1HrESAlarmThresh was exceeded.
|
|
.1.3.6.1.4.1.9.9.181.1.2.0.4 |
The p2mpSuLink1HrSESAlarmThresh was exceeded.
|
|
.1.3.6.1.4.1.9.9.181.1.2.0.5 |
The p2mpSuLink1HrCSESAlarmThresh was exceeded.
|
|
.1.3.6.1.4.1.9.9.181.1.2.0.6 |
The p2mpSuLink1HrDCSAlarmThresh was exceeded.
|