CISCO-WAN-RSRC-PART-MIB Table View

This table is for configuring resource partition parameters.
A resource partition is configured on an interface whose
ifType is atmVirtual(149) or atm(37). An entry can be added,
deleted or modified. Entries in this table can be modified
through the commands provided by the CLI also.

cwRsrcPartConfEntry row .1.3.6.1.4.1.9.9.125.1.1.1.1

An entry for a resource partition. A resource partition
has to be created before connections can be added to the
interface.
In the following objects, ingress direction means, from network
to switch, and egress direc…

Indexes

IF-MIBifIndex cwRsrcPartID

Column	Syntax	OID
cwRsrcPartID This is resource partition identifier. One interface can have multiple resource partitions on it.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.125.1.1.1.1.1
cwRsrcPartController This is controller identifier. Once a resource partition is added the controller identified by this identifier can access resources configured for this partition.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.125.1.1.1.1.2
cwRsrcPartEgrGuarPctBwConf The guaranteed percentage bandwidth reserved for the resource partition in egress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of interface's guaranteed bandwidth.	0.0001 percentageUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.3
cwRsrcPartEgrMaxPctBwConf The maximum percentage bandwidth for the resource partition in egress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to this value.	0.0001 percentageUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.4
cwRsrcPartIngGuarPctBwConf The guaranteed percentage bandwidth reserved for the resource partition in ingress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of the interface's guaranteed bandwidth.	0.0001 percentageUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.5
cwRsrcPartIngMaxPctBwConf The maximum percentage bandwidth allocated for the resource partition in ingress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to th…	0.0001 percentageUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.6
cwRsrcPartEgrPctBwUsed This is the percentage bandwidth used by the resource partition in egress direction.	0.0001 percentageUnsigned32 Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.7
cwRsrcPartIngPctBwUsed This is the percentage bandwidth used by the resource partition in ingress direction.	0.0001 percentageUnsigned32 Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.8
cwRsrcPartEgrPctBwAvail This is the percentage bandwidth available on the resource partition in egress direction.	0.0001 percentageUnsigned32 Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.9
cwRsrcPartIngPctBwAvail This is the percentage bandwidth available on the resource partition in ingress direction.	0.0001 percentageUnsigned32 Constraints: range: 0-1000000	.1.3.6.1.4.1.9.9.125.1.1.1.1.10
cwRsrcPartVpiLo The beginning of the VPI range for this partition. Connections provisioned on this partition must have a VPI greater than or equal to this value.	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.125.1.1.1.1.11
cwRsrcPartVpiHigh The end of the VPI range for this partition. Connections provisioned on this partition must have a VPI less than or equal to this value.	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.125.1.1.1.1.12
cwRsrcPartVciLo The beginning of the VCI range for this partition. Connections provisioned on this partition must have VCI greater than or equal to this VCI.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.125.1.1.1.1.13
cwRsrcPartVciHigh The end of the VCI range reserved for this partition. Connections provisioned on this partition must have a VCI less than or equal to this VCI.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.125.1.1.1.1.14
cwRsrcPartGuarCon The guaranteed number of connections that can be configured on this partition.	Unsigned32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.9.9.125.1.1.1.1.15
cwRsrcPartMaxCon The maximum number of connections that can be configured on this partition.	Unsigned32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.9.9.125.1.1.1.1.16
cwRsrcPartUsedCon This is the number of connections currently in use on this partition.	Unsigned32 Constraints: range: 0-131072	.1.3.6.1.4.1.9.9.125.1.1.1.1.17
cwRsrcPartAvailCon This is the number of connections available, that can be added on this partition.	Unsigned32 Constraints: range: 0-131072	.1.3.6.1.4.1.9.9.125.1.1.1.1.18
cwRsrcPartRowStatus This will add, delete or modify the partition. Resource partition can be created by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.125.1.1.1.1.19

This is the ILMI configuration table. If the interface supports
ILMI, the agent will automatically create a row in this table
when a row is created in cwRsrcPartConfTable. The ILMI objects
will be set with default values, i.e, with ILMI signalling
disabled.

cwRsrcPartIlmiEntry row .1.3.6.1.4.1.9.9.125.1.1.2.1

If the interface supports ILMI, the agent will automatically
create an entry in this table when a resource partition is
created. By default, ILMI is disabled on resource partitions.
ILMI can be enabled by setting 'cwR…

Indexes

IF-MIBifIndex cwRsrcPartID

Column	Syntax	OID
cwRsrcPartIlmiEnabled By setting the value of this object to 'true', ILMI signalling is enabled on the resource partition.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.125.1.1.2.1.1
cwRsrcPartSignallingVpi Indicates the VPI on which signalling cells arrive on this resource partition.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.125.1.1.2.1.2
cwRsrcPartSignallingVci Indicates the VCI on which signalling cells arrive on this resource partition.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.125.1.1.2.1.3
cwRsrcPartIlmiTrapEnable ILMI trap generation can be enabled or disabled using this object.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.125.1.1.2.1.4
cwRsrcPartIlmiEstablishConPollIntvl The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.	secondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.125.1.1.2.1.5
cwRsrcPartIlmiCheckConPollIntvl The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on thi…	secondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.125.1.1.2.1.6
cwRsrcPartIlmiConPollInactFactor The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.125.1.1.2.1.7

This table is for configuring additional controllers to
manage a resource partition.

cwRsrcPartCtlrConfEntry row .1.3.6.1.4.1.9.9.125.1.1.3.1

An entry for additional controllers to control an existing
resource partition. The resource partition, identified by
indices ifIndex and cwRsrcPartID, must exist in the
cwRsrcPartConfTable. An entry from this table is …

Indexes

IF-MIBifIndex cwRsrcPartID cwRsrcPartCtlrController

Column	Syntax	OID
cwRsrcPartCtlrController This is controller identifier. One resource partition can be controlled by multiple controllers.User may want to do this to configure redundant controllers.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.125.1.1.3.1.1
cwRsrcPartCtlrRowStatus This is used to create a row in the cwRsrcPartCtlrConfTable. A redundant controller is added by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.125.1.1.3.1.2

This table is for configuring an SVC aggregate resource within 
a resource partition. This provides aggregate bandwidth and 
VPI range within a resource partition that CAC (Call Admission
Control) can dynamically allocate the required resource from 
it to establish a SVC connection for the incoming call. 
          
The allocated bandwidth will become available in the SVC 
aggregate when the call is torn down.  When the required 
bandwidth of an incoming call exceeds the bandwidth available 
for SVC connection, the CAC will fail the establishment of the 
new call.

cwRsrcSvcAggregateEntry row .1.3.6.1.4.1.9.9.125.1.2.1.1

An entry of SVC Aggregate.
An SVC Aggregate is used to reserve certain bandwidth
in the resource partition to be dedicated for call set-up.

Indexes

IF-MIBifIndex cwRsrcPartID

Column	Syntax	OID
cwRsrcSvcAggrVpiLow The low end of the VPI range for this SVC aggregate. This value has to be greater than or equal to the value of cwRsrcPartVpiLo of the containing resource partition. SVC connection provisioned on this SVC aggregate mus…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.125.1.2.1.1.1
cwRsrcSvcAggrVpiHigh The high end of the VPI range for this SVC aggregate. This value has to be less than or equal to the value of cwRsrcPartVpiHigh of the containing resource partition. SVC connection provisioned on this SVC aggregate must…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.125.1.2.1.1.2
cwRsrcSvcAggrEgrPctBw This object indicates the percentage egress bandwidth that is used by SVC connections within the resource partition. The total egress bandwidth will be used by SVC connections within the resource parti…	percentInteger32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.125.1.2.1.1.3
cwRsrcSvcAggrIngPctBw This object indicates the percentage ingress bandwidth that is used by SVC connections within the resource partition. The total ingress bandwidth will be used by SVC connections within the resource par…	percentInteger32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.125.1.2.1.1.4
cwRsrcSvcAggrChanVADTolerance The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed value. The actual range of this object is 0.0001(or 0.01%) to …	0.0001Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.9.9.125.1.2.1.1.5
cwRsrcSvcAggrChanVADDutyCycle This object refers to the talk-spurts duty cycle. The actual range of this object is 0.01(or 1%) to 0.99(or 99%). When the value of this object is to be passed to underlying CAC module th…	0.01Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.9.9.125.1.2.1.1.6
cwRsrcSvcAggrRowStatus When an entry of the table is created, the following objects are mandatory: cwRsrcSvcAggrVpiLow cwRsrcSvcAggrVpiHigh cwRsrcSvcAggrEgrPctBw cwRsrcSvcAggrIngPctBw	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.125.1.2.1.1.7