CISCO-WAN-MODULE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

cwmConfigTable

table
.1.3.6.1.4.1.9.9.145.1.1.1 · 1 row entry · 7 columns
Open in standard view 
This table contains objects required for configuring module
specific parameters. These parameters may be related to the
hardware specific parameters which can affect the
ATM Connection characteristics.
cwmConfigEntry entry .1.3.6.1.4.1.9.9.145.1.1.1.1
Entry containing information for each module.
Indexes
cwmIndex
Column Syntax OID
cwmIndex
This object's value generally corresponds to the
slot number where the module resides. However,
system wide uniqueness is the only true requirement.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.145.1.1.1.1.1
cwmIngressSCTFileId
The file ID of the Service Class Template(SCT) file. The SCT
holds the connection specific parameters for this module in
the ingress direction(From Network to the Switch).

Terminologies used:
SCT : Servic…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.145.1.1.1.1.2
cwmIngressSCTFileName
This variable contains the SCT filename. Write access
is not required. The filename has cwmIngressSCTFileId
value as the suffix. For example, the value SCT.INGR.13
for this object indicates 13 is the value of
cwmIngress…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.145.1.1.1.1.3
cwmAutoLineDiagEnable
This object enables/disables automatic diagnostic feature
of physical lines on module.
In case of a line alarm, enabling this feature temporarily
suspends traffic in both direction and starts local loop-back
testing. D…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.9.9.145.1.1.1.1.4
cwmSCTFileVerCfg
The Configured version of the Service Class Template(SCT)
file. This version applies to both the card SCT and the port
SCT files in a service module.

The port SCT files are specified while provisioning a …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.145.1.1.1.1.5
cwmSCTFileVerOpr
The operational version of the Service Class Template(SCT)
file. This is sct version currently in use. The operational
version could be different from the configured version
(cwmSCTFileVerCfg), until the service modul…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.145.1.1.1.1.6
cwmUploadCounter
This counter is used by the management station to
determine if any changes(other than ATM/FR connections)
have been done on configuration of a card.

The use of this object is implementation specific.
Thi…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.9.145.1.1.1.1.7

cwmStatConfigTable

table
.1.3.6.1.4.1.9.9.145.1.2.1 · 1 row entry · 6 columns
Open in standard view 
This table has objects required for configuring module statistic 
collection related parameters. The statistics related to interfaces
and ATM Connections are stored in a file. The statistics file can be
uploaded by NMS applications using file transfer protocols such as tftp 
or ftp. While current interval of data is being collected in memory,
previous interval of data is uploaded by NMS. Each interval's
data will overwrite the previous interval's data in the statistic 
file after the interval is over.
cwmStatConfigEntry entry .1.3.6.1.4.1.9.9.145.1.2.1.1
Entry containing statistics configuration information for
the module.
Indexes
cwmIndex
Column Syntax OID
cwmStatBucketInterval
This object contains the bucket interval in minutes used in
collecting statistics. This specifies the interval over
which the module accumulates a sample. This value also
defines the amount of time available to NMS app…
minutesEnumerationr/w
Enumerated Values:
5five
10ten
15fifteen
20twenty
30thirty
60sixty
 .1.3.6.1.4.1.9.9.145.1.2.1.1.1
cwmStatCollectionInterval
The collection interval of statistics. Within a sampling interval,
as defined by cwmStatBucketInterval, statistics counters are
updated every collection interval.

Default value of collection interval is …
minutesEnumerationr/w
Enumerated Values:
0default
1one
5five
 .1.3.6.1.4.1.9.9.145.1.2.1.1.2
cwmStatCollectionStatus
Enables or disables statistics collection on the module.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.9.9.145.1.2.1.1.3
cwmStatCurrentLevel
The current statistics level of the module.

A change in the card statistic level can take place only
after a module reset. This object shows the current module
statistic level. While cwmStatLevelConfigure…
StatisticsLevel
Textual Convention: StatisticsLevel Enumeration
Type Values:
0notApplicable
1levelOne
2levelTwo
3levelThree
 .1.3.6.1.4.1.9.9.145.1.2.1.1.4
cwmStatLevelConfigured
This object is used to configure the statistics level
for the module. The statistics level value set in this
object will take effect only on reset of the module.

This object can be set only if cwmStatCol…
StatisticsLevelr/w
Textual Convention: StatisticsLevel Enumeration
Type Values:
0notApplicable
1levelOne
2levelTwo
3levelThree
 .1.3.6.1.4.1.9.9.145.1.2.1.1.5
cwmStatMaximumConnections
The maximum number of connections for which the statistics are
being collected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.145.1.2.1.1.6