Standard view Table view

CISCO-WAN-MODULE-MIB

        The MIB to configure Connection Specific parameters and
statistics related information in a Service Module.
The Service Module(SM) is defined as any Module which
provides services such as ATM, Frame Relay or Voice in a
Wide Area Network(WAN) switch.
Source file
CISCO-WAN-MODULE-MIB
Last revised
Identity
ciscoWanModuleMIB
Base OID
1.3.6.1.4.1.9.9.145
Imported Objects
CISCO-SMI ciscoMgmt
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString TEXTUAL-CONVENTION
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WAN-MODULE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WAN-MODULE-MIB::ciscoWanModuleMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-MODULE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-MODULE-MIB::ciscoWanModuleMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (26)
ciscoWanModuleMIB
.1.3.6.1.4.1.9.9.145
cwmMIBObjects
.1.3.6.1.4.1.9.9.145.1
cwmConfig
.1.3.6.1.4.1.9.9.145.1.1
cwmConfigTable
.1.3.6.1.4.1.9.9.145.1.1.1
cwmConfigEntry
cwmIndex
 .1.3.6.1.4.1.9.9.145.1.1.1.1
cwmIndex
Unsigned32
 .1.3.6.1.4.1.9.9.145.1.1.1.1.1
cwmIngressSCTFileId r/w
Unsigned32
 .1.3.6.1.4.1.9.9.145.1.1.1.1.2
cwmIngressSCTFileName r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.9.145.1.1.1.1.3
cwmAutoLineDiagEnable r/w
Enumeration
 .1.3.6.1.4.1.9.9.145.1.1.1.1.4
cwmSCTFileVerCfg r/w
Unsigned32
 .1.3.6.1.4.1.9.9.145.1.1.1.1.5
cwmSCTFileVerOpr
Unsigned32
 .1.3.6.1.4.1.9.9.145.1.1.1.1.6
cwmUploadCounter
Unsigned32
 .1.3.6.1.4.1.9.9.145.1.1.1.1.7
cwmStatsConfig
.1.3.6.1.4.1.9.9.145.1.2
cwmStatConfigTable
.1.3.6.1.4.1.9.9.145.1.2.1
cwmStatConfigEntry
cwmIndex
 .1.3.6.1.4.1.9.9.145.1.2.1.1
cwmStatBucketInterval r/w
minutesEnumeration
 .1.3.6.1.4.1.9.9.145.1.2.1.1.1
cwmStatCollectionInterval r/w
minutesEnumeration
 .1.3.6.1.4.1.9.9.145.1.2.1.1.2
cwmStatCollectionStatus r/w
Enumeration
 .1.3.6.1.4.1.9.9.145.1.2.1.1.3
cwmStatCurrentLevel
StatisticsLevel
 .1.3.6.1.4.1.9.9.145.1.2.1.1.4
cwmStatLevelConfigured r/w
StatisticsLevel
 .1.3.6.1.4.1.9.9.145.1.2.1.1.5
cwmStatMaximumConnections
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.145.1.2.1.1.6
ciscoWanModuleMIBNotificationPrefix
.1.3.6.1.4.1.9.9.145.2
ciscoWanModuleMIBNotifications
.1.3.6.1.4.1.9.9.145.2.0
ciscoWanModuleMIBConformance
.1.3.6.1.4.1.9.9.145.3
ciscoWanModuleMIBCompliances
.1.3.6.1.4.1.9.9.145.3.1
ciscoWanModuleMIBGroups
.1.3.6.1.4.1.9.9.145.3.2
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. CISCO-WAN-MODULE-MIBciscoselected
Type Definitions (1)
StatisticsLevel
Enumeration
notApplicable(0)
levelOne(1)
levelTwo(2)
levelThree(3)
Conformance Groups (4)
cwmConfigGroup
cwmIngressSCTFileId cwmIngressSCTFileName cwmAutoLineDiagEnable
Group containing Module Specific Parameters.
 .1.3.6.1.4.1.9.9.145.3.2.1
cwmStatConfigGroup
cwmStatBucketInterval cwmStatCurrentLevel cwmStatLevelConfigured cwmStatCollectionStatus cwmStatCollectionInterval cwmStatMaximumConnections
Group containing statistics configuration.
 .1.3.6.1.4.1.9.9.145.3.2.2
cwmConfigGroup2
cwmSCTFileVerCfg cwmSCTFileVerOpr
Group containing additional Module Specific Parameters.
 .1.3.6.1.4.1.9.9.145.3.2.3
cwmUploadGroup
cwmUploadCounter
Group containing objects related to configuration
changes in a card.
 .1.3.6.1.4.1.9.9.145.3.2.4
Compliance Statements (3)

OID .1.3.6.1.4.1.9.9.145.3.1.1
The Compliance statement for cwmConfigGroup group.
Required groups
mandatory cwmConfigGroup
optional cwmStatConfigGroup Implementation of this group is not mandatory for
the modules which does not support statistics collection.
Object refinements
ObjectAccessSyntaxDescription
cwmIngressSCTFileName readonly
Write access is not required if the cwmIngressSCTFileId
is specified.
cwmStatCollectionInterval noaccess
This is an optional attribute.
cwmStatCurrentLevel noaccess
This is an optional attribute. This attribute is not required
if the cwmStatLevelConfigured object is not supported.
cwmStatLevelConfigured noaccess
This is an optional attribute. This object is not required
if the module does not support the statistics based on
statistics level setting.

OID .1.3.6.1.4.1.9.9.145.3.1.2
The Compliance statement for cwmConfigGroup group,
with addition of SCT file versioning
Required groups
mandatory cwmConfigGroup
mandatory cwmConfigGroup2
optional cwmStatConfigGroup Implementation of this group is not mandatory for
the modules which does not support statistics
collection.
Object refinements
ObjectAccessSyntaxDescription
cwmIngressSCTFileName readonly
Write access is not required if the cwmIngressSCTFileId
is specified.
cwmStatCollectionInterval noaccess
This is an optional attribute.
cwmStatCurrentLevel noaccess
This is an optional attribute. This attribute is not
required if the cwmStatLevelConfigured object is not
supported.
cwmStatLevelConfigured noaccess
This is an optional attribute. This object is
not required if the module does not support the
statistics based on statistics level setting.

OID .1.3.6.1.4.1.9.9.145.3.1.3
The Compliance statement for cwmConfigGroup group,
with addition of SCT file versioning
Required groups
mandatory cwmConfigGroup
mandatory cwmConfigGroup2
optional cwmUploadGroup The implementation of this group is mandatory
where the changes to card configuration can
be tracked.
optional cwmStatConfigGroup Implementation of this group is not mandatory for
the modules which does not support statistics
collection.
Object refinements
ObjectAccessSyntaxDescription
cwmIngressSCTFileName readonly
Write access is not required if the cwmIngressSCTFileId
is specified.
cwmStatCollectionInterval noaccess
This is an optional attribute.
cwmStatCurrentLevel noaccess
This is an optional attribute. This attribute is not
required if the cwmStatLevelConfigured object is not
supported.
cwmStatLevelConfigured noaccess
This is an optional attribute. This object is
not required if the module does not support the
statistics based on statistics level setting.