CISCO-VSI-CONTROLLER-MIB Table View

This table contains the entries for VSI Controllers.
This table is used for informing the VSI Slaves about
the existence of VSI Controllers and how the VSI slaves
 can reach the controller. The information in these entries
 are advertised to all the VSI Slaves using a system
 dependent implementation when an entry is created/activated.

cvcConfEntry row .1.3.6.1.4.1.9.9.141.1.1.1.1

An entry for a VSI Controller.
The entries in this table are created by setting the
cvcConfRowStatus object to 'createAndGo(4)'.
The entries in this table are deleted by setting the
cvcConfRowStatus object to 'destr…

Indexes

cvcConfControllerID

Column	Syntax	OID
cvcConfControllerID This is the unique value for VSI Controller(VSI Master). The VSI Slave uses this value in the message to identify the VSI Master controller.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.141.1.1.1.1.1
cvcConfControllerType This object identifies the controller type. This object may not be modified if the associated cvcConfRowStatus is equal to 'active(1)'.	CvcControllerTyper/w Type Values: 1 par 2 pnni 3 lsc	.1.3.6.1.4.1.9.9.141.1.1.1.1.2
cvcConfControllerShelfLocation This identifies the location of the controller shelf. This Object can be set only during row creation.	CvcControllerShelfLocationr/w Type Values: 1 internal 2 external	.1.3.6.1.4.1.9.9.141.1.1.1.1.3
cvcConfControllerLocation This identifies the location of the controller. This object might contain the logical slot number of the Module where the controller is running on the same shelf as the switch. This object might contain the value of th…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.141.1.1.1.1.4
cvcConfControllerName This is the name choosen by the user for the VSI Controller. This object contains Octet string of length zero, if the user does not set the value for this object. This object may not be modified if the associated cvc…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.141.1.1.1.1.5
cvcConfVpi This is the Virtual Path Identifier(VPI) used for connecting to the controller which is external to the switch. This object has significance only if cvcConfControllerShelfLocation is 'external(2)'. This object may not …	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.141.1.1.1.1.6
cvcConfVci This is the start value of Virtual Channel Identifier(VCI) used for connecting to the controller which is external to the switch. This object has significance only if cvcConfControllerShelfLocation is 'external(2)'. …	Integer32r/w Constraints: range: 32-65535	.1.3.6.1.4.1.9.9.141.1.1.1.1.7
cvcConfRowStatus This object is used for adding,deleting and modifying the controller configuration. The row can be created by setting this object to 'createAndGo(4)'. The row can be deleted by setting this object to 'destroy(6)'. Th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.141.1.1.1.1.8