CISCO-VLAN-MEMBERSHIP-MIB Table View

A table of VMPS to use. The device will use
the the primary VMPS by default. If the
device is unable to reach the primary server
after vmVmpsRetries retries, it uses the first
secondary server in the table until it runs out
of secondary servers, in which case it will return
to using the primary server. Entries in this table
may be created and deleted via this MIB or
the management console on a device.

vmVmpsEntry row .1.3.6.1.4.1.9.9.68.1.1.7.1

An entry (conceptual row) in the vmVmpsTable.

Indexes

vmVmpsIpAddress

Column	Syntax	OID
vmVmpsIpAddress The Ip Address of the VMPS.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.68.1.1.7.1.1
vmVmpsPrimary The status of the VMPS. Setting this value to true will make this VMPS the primary server and make the switch use this as the current server. Setting this entry to true causes other rows to transition to false. Attempti…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.68.1.1.7.1.2
vmVmpsRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.68.1.1.7.1.3

A summary of VLAN membership of non-trunk
bridge ports. This is a convenience table
for retrieving VLAN membership information.
          
A row is created for a VLAN if:
a) the VLAN exists, or
b) a port is assigned to a non-existent VLAN.
          
VLAN membership can only be modified via the
vmMembershipTable.

vmMembershipSummaryEntry row .1.3.6.1.4.1.9.9.68.1.2.1.1

An entry (conceptual row) in the
vmMembershipSummaryTable.

Indexes

vmMembershipSummaryVlanIndex

Column	Syntax	OID
vmMembershipSummaryVlanIndex The VLAN id of the VLAN.	CISCO-VTP-MIBVlanIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.9.68.1.2.1.1.1
vmMembershipSummaryMemberPortsdeprecated The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.9.9.68.1.2.1.1.2
vmMembershipSummaryMember2kPorts The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2048 ports with the port number from 1 to 2048. Each octet within the value of this object sp…	CISCO-TCCiscoPortList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.68.1.2.1.1.3

A table for configuring VLAN port membership.
There is one row for each bridge port that is
assigned to a static or dynamic access port. Trunk
ports are not  represented in this table.  An entry
may be created and deleted when ports are created or
deleted via SNMP or the management console on a 
device.

vmMembershipEntry row .1.3.6.1.4.1.9.9.68.1.2.2.1

An entry (conceptual row) in the vmMembershipTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vmVlanType The type of VLAN membership assigned to this port. A port with static vlan membership is assigned to a single VLAN directly. A port with dynamic membership is assigned a single VLAN based on content of packets received …	Enumerationr/w Enumerated Values: 1 static 2 dynamic 3 multiVlan	.1.3.6.1.4.1.9.9.68.1.2.2.1.1
vmVlan The VLAN id of the VLAN the port is assigned to when vmVlanType is set to static or dynamic. This object is not instantiated if not applicable. The value may be 0 if the port is not assigned to a VLAN. …	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.68.1.2.2.1.2
vmPortStatus An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned, or a port is assigned to a VLAN that is currently not active. A status of …	Enumeration Enumerated Values: 1 inactive 2 active 3 shutdown	.1.3.6.1.4.1.9.9.68.1.2.2.1.3
vmVlans The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may n…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.68.1.2.2.1.4
vmVlans2k The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may n…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.68.1.2.2.1.5
vmVlans3k The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may n…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.68.1.2.2.1.6
vmVlans4k The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may n…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.68.1.2.2.1.7

A summary of VLAN membership of non-trunk
bridge ports. This table is used for 
retrieving VLAN membership information
for the device which supports dot1dBasePort 
with value greater than 2048.
          
A row is created for a VLAN and a particular
bridge port range, where at least one port 
in the range is assigned to this VLAN.
          
VLAN membership can only be modified via the
vmMembershipTable.

vmMembershipSummaryExtEntry row .1.3.6.1.4.1.9.9.68.1.2.3.1

An entry (conceptual row) in the
vmMembershipSummaryExtTable.

Indexes

vmMembershipSummaryVlanIndex vmMembershipPortRangeIndex

Column	Syntax	OID
vmMembershipPortRangeIndex The bridge port range index of this row.	CISCO-TCCiscoPortListRange Type Values: 1 oneto2k 2 twoKto4K 3 fourKto6K 4 sixKto8K 5 eightKto10K 6 tenKto12K 7 twelveKto14K 8 fourteenKto16K	.1.3.6.1.4.1.9.9.68.1.2.3.1.1
vmMembershipSummaryExtPorts The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2k ports with the port number starting from the information indicated in vmMembershipPortRangeIndex object of…	CISCO-TCCiscoPortList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.68.1.2.3.1.2

A table for configuring the Voice VLAN-ID
for the ports. An entry will exist for each
interface which supports Voice Vlan feature.

vmVoiceVlanEntry row .1.3.6.1.4.1.9.9.68.1.5.1.1

An entry (conceptual row) in the vmVoiceVlanTable.
Only interfaces which support Voice Vlan feature
are shown.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vmVoiceVlanId The Voice Vlan ID (VVID) to which this port belongs to. 0 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 0. VoIP a…	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.9.9.68.1.5.1.1.1
vmVoiceVlanCdpVerifyEnable Enable or Disable the feature of CDP message verification of voice VLANs. true - The voice VLAN vmVoiceVlan is enabled only after CDP messages are received from the IP phone. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.68.1.5.1.1.2