CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
Monitored by Observium Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex
information for routed VLAN interfaces.
A routed VLAN interface is the router interface or sub-interface
to which the router's IP address on the VLAN is attached.
For example, an ISL, SDE, or 802.1Q encapsulated
subinterface, or Switched Virtual Interface (SVI).
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Ports
Explore Observium network monitoring
- Source file
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB- Last revised
- Identity
ciscoVlanIfTableRelationshipMIB- Base OID
1.3.6.1.4.1.9.9.128
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | InterfaceIndexOrZero |
| CISCO-VTP-MIB | VlanIndex |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB::ciscoVlanIfTableRelationshipMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB::ciscoVlanIfTableRelationshipMIB'
Objects (11)
1 directly used by Observium
Showing 11 of 11 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.128 |
||
.1.3.6.1.4.1.9.9.128.1 |
||
.1.3.6.1.4.1.9.9.128.1.1 |
||
.1.3.6.1.4.1.9.9.128.1.1.1 |
||
.1.3.6.1.4.1.9.9.128.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.128.1.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.128.1.1.1.1.2 |
||
|
cviRoutedVlanIfIndex
OBS ✓
|
.1.3.6.1.4.1.9.9.128.1.1.1.1.3 |
|
.1.3.6.1.4.1.9.9.128.1.3 |
||
.1.3.6.1.4.1.9.9.128.1.3.1 |
||
.1.3.6.1.4.1.9.9.128.1.3.2 |
Dependencies (12) 6 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- RMON-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VTP-MIBcisco
- CISCO-VLAN-IFTABLE-RELATIONSHIP-MIBciscoselected
Conformance Groups (1)
|
A set of objects to obtain VLAN-ID and ifIndex
information for routed VLAN interfaces. |
.1.3.6.1.4.1.9.9.128.1.3.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.128.1.3.1.1The compliance statement for entities which implement
the CISCO-VLAN-INTERFACE-MIB
the CISCO-VLAN-INTERFACE-MIB
Required groups
| mandatory | cviMIBGroup |