CISCO-VISM-DSX1-MIB Table View

The TDM line interface alarm history table.

dsx1AlmHistoryEntry row .1.3.6.1.4.1.351.110.4.3.1.3.2.1

An entry in the DS1/E1 Alarm History table.

Indexes

almlineNumber almIntervalNumber

Column	Syntax	OID
almlineNumber This object is the identifier of a DS1/E1 Interface on a managed device.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.1
almIntervalNumber This is the alarm interval number which associates with time interval alarms occurred.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.2
lCV The accumulated number of Line code violations encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.3
lES The accumulated number of Line code violations Errored Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.4
lSES The accumulated number of LCV (Line Code Violations) Severely Errored Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.5
cRC The accumulated number of P Bit code violations encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.6
cRCES The accumulated number of PVC Errored Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.7
cRCSES The accumulated number of P Bit code violations Severely Errored Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.8
sEFS The accumulated number of Severely Errored Framing Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.9
aISS The accumulated number of AIS Severely Errored Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.10
uAS The accumulated number of Unavailable Seconds encountered on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.11
percentErrorFreeSecs The accumulated the percentage of LCV (Line Code Violation) Error Free Seconds.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.12
rcvLOSCnt The accumulated number of LOS (Loss of Signal) detected with or without integrating to LOS alarm on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.13
rcvOOFCnt The accumulated number of OOF (Out of Frame) detected with or without integrating to OOF alarm on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.14
rcvRAICnt The accumulated number of Yellow Alarms detected with or without integrating to RAI alarm on the DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.15
rcvFECnt The accumulated number of Framing Pattern Errors encountered on a DS1/E1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.16
dsx1AlmClrButton This variable is used to clear all the alarms for the line/interval.	Enumerationr/w Enumerated Values: 1 noaction 2 clear	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.17
dsx1TxUncontrolledSlips This counter counts the number of uncontrolled slips in the transmit direction during this interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.18
dsx1RxUncontrolledSlips This counter counts the number of uncontrolled slips in the receive direction during this interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.19
dsx1TxFrameSlips This counter counts the number of frame slips in the transmit direction during this interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.20
dsx1RxFrameSlips This counter counts the number of frame slips in the receive direction during this interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.2.1.21

The VISM specific DS1/E1 configuration table. This table
contains the additional VISM configuration information
for DS1/E1.

dsx1VismCnfGrpEntry row .1.3.6.1.4.1.351.110.4.3.5.1.1.1

An entry in the VISM Dsx1 Configuration table.
An entry is created when a DS1/E1 is added.
An entry is deleted when a DS1/E1 is deleted.

The DS1/E1 is specify by 'lineEnable' object
in CISCO-MGX82XX-DSX1-MI…

Indexes

vismLineNum

Column	Syntax	OID
vismLineNum This object identifies the DS1/E1 interface number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.1
vismEcanEnabled This object disable/enable echo cancellation. 'disable' : disable echo cancellation. 'enable' : enable echo cancellation.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.2
vismEcanToneDisabledeprecated This object determines the behavior of the echo canceler in the presence of a modem. 'ignore': Ignore 2100 Hz modem answer tone. 'g-164' : G-164 mode, disable the canceler for all the tones, pha…	Enumeration Enumerated Values: 1 ignore 2 g-164 3 reserve 4 g-165	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.3
vismEcanCnfNRNdeprecated Echo canceler re-enable (NRN). This object determines when an echo canceler re-enable and begins cancellation after it has been disabled. 'reenableOnModemData': Re-enable canceler when modem …	Enumeration Enumerated Values: 1 reenableOnModemData 2 reenableOnCallEnd	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.4
vismEcanTail This object identifies the maximum tail. The object should be set just higher than the worst round trip delay anticipated. Convergence times may increase for longer tails and more resource will be used. …	millisecondsInteger32r/w Constraints: range: 24-128	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.5
vismEcanREC Residual Echo Control (REC) instructs the canceler how to treat echo remaining after cancellation. 'cancelOnly' : REC is disabled. 'suppressResidual': The residual echo is replaced …	Enumerationr/w Enumerated Values: 1 cancelOnly 2 suppressResidual 3 reserved 4 comfortNoise	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.6
vismCompCnfVAD This object identifies VAD (Voice Activity Detection). 'disable': Disable VAD on the compression DSPs. 'enable' : Enable VAD on the compression DSPs.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.7
vismSignalingType This object specifies the type of signaling used for the line. 'cas' : Channel Associated Signaling. 'ccs' : Common Channel Signaling. 'none' : No signaling used. This cannot be modified…	Enumerationr/w Enumerated Values: 1 cas 2 ccs 3 none	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.8
vismCcsChannels This object describes the CCS signaling channels or DS0s (also referred to as D-channel). It is used only for lines configured as CCS signaling type. It is a bit map of the DS0s configured as D channel. A one in the…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.9
vismCadenceTimedeprecated This object describes the cadence time for CAS signals. This object is applicable only for CAS backhaul applications. For trunking application it is not applicable.	millisecondsInteger32 Constraints: range: 50-200	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.10
vismTrunkConditionEnable This object determines if trunk conditioning should be enabled or disabled on this line. If this object is set to true(1), VISM will do trunk conditioning on the affected DS0s on this line when it sees an alarm (AIS…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.11
vismDsx1CircuitIdentifier This object is the identifier of a T1/E1 line. It contains alphanumeric description of a line for the purpose of better identification.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.12
vismDsx1TxDigitOrder When the call agent hands the ANI (Automatic Number Identification, denoting the calling party number) and the DNIS (Destination Number Identification Service, indicating the called party number) to the gateway for d…	Enumerationr/w Enumerated Values: 1 aniThenDnis 2 dnisThenAni	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.13
vismDsx1TonePlanRegion This object specifies regional tone plan string. If the value of the object is 'NULL' then it will be considered non usable, and non 'NULL' is (usable or activated and related to an entry in the vismTonePlanTable tab…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.14
vismDsx1TonePlanVersion This object will either be considered NULL (i.e. non usable) or non NULL (usable or activated and related to an entry in the vismTonePlanTable table). This object must be compatible with the vismDsx1TonePlanRegion obj…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.15
vismDsx1RingingTO Time in seconds for which the ringing cadence will be generated towards the basic PBX unless interrupted (e.g. by the answer from the called party or a delete connection command from the Call Agent). This is also the …	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.16
vismDsx1RingBackTO Time in seconds for which the local ring back tone (towards the TDM) will be generated unless interrupted (e.g. by the answer from the called party or a delete connection command from the Call Agent). The value Zero …	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.17
vismDsx1BusyTO Time in seconds for which the busy tone will be generated unless interrupted (e.g. by the hangup from the calling party). The value Zero indicates that the tone will be generated indefinitely unless interrupted. …	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.18
vismDsx1ReorderTO Time in seconds for which the reorder/fast busy tone will be generated unless interrupted (e.g. by the hangup from the calling party). The value zero indicates that the tone will be generated indefinitely unless inter…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.19
vismDsx1DialTO Time in seconds for which the dial tone will be generated unless interrupted (e.g. by the first DTMF digit from the calling party). The value Zero indicates that the tone will be generated indefinitely unless interru…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.20
vismDsx1StutterDialTO Time in seconds for which the stutter dial tone/confirmation dial tone will be generated unless interrupted (e.g. by the first DTMF digit from the calling party). The value Zero indicates that the tone will be generat…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.21
vismDsx1OffHookAlertTO Time in seconds for which the off-hook alert tone will be generated unless interrupted (e.g. caller hangup). The value Zero indicates that the tone will be generated indefinitely unless interrupted. Thi…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.22
vismDsx1RemoteRingback This object specifies the remote ring back method on endpoints on this DS1/E1. This object can have the following values: 'proxy(1)': This gateway sends the appropriate packet (NSE, NTE, or…	Enumerationr/w Enumerated Values: 1 proxy 2 inband	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.23
vismDsx1MidcallTpart This object represents the partial dial timing in seconds and is used along with a digit map as the inter-digit timer. This object is used for both CAS and non CAS endpoints when doing mid call DTMF digit reporting. T…	secondsInteger32r/w Constraints: range: 10-10000	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.24
vismDsx1MidcallTcrit This object represents the critical timing in seconds. If used along with a digit map, the timer is started when the last digit is received i.e when no more digits are required for a digit map match. After this timer ex…	secondsInteger32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.25
vismDsx1Sa4Byte This is a spare bit on T1/E1 Framer reserved for international standardization.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.26
vismDsx1Sa5Byte This is a spare bit on T1/E1 Framer reserved for international standardization.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.27
vismDsx1Sa6Byte This is a spare bit on T1/E1 Framer reserved for international standardization.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.28
vismDsx1Sa7Byte This is a spare bit on T1/E1 Framer reserved for international standardization.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.29
vismDsx1Sa8Byte This is a spare bit on T1/E1 Framer reserved for international standardization.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.30
vismDsx1State This object will allow the line administrative state (in service and out of service) to be persistent. invalid (1) : invalid state. is (2) : in service oos (3) : out of service poos (4) : pending out of serv…	Enumeration Enumerated Values: 1 invalid 2 is 3 oos 4 poos 5 coos 6 inactive	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.31
vismDsx1AdminStateControl This control object is used to change the service state of the line from 'is' to 'coos' or from 'coos' to 'is'. The resulting service state of the line is represented by vismDsx1State. 'inService': Transi…	Enumerationr/w Enumerated Values: 1 inService 2 forcefulOutOfService 3 gracefulOutOfService 4 inactive	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.32
vismBearerBusyCode This object is used when vismTrunkConditionEnable is enabled on a line. It is a configurable busy pattern sent out on the 'Bearer' on the channels, which are receiving remote ATM channel ID (CID) alarms. If this object …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.33
vismDsx1V110Enable This object specifies whether V.110 detection on the line is enabled or disabled. If the value of this object is 'true', V.110 detection on the line is enabled. If the value of this object is 'false', V.110 detection o…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.34
vismDsx1AlarmLogEnable This object specifies whether detailed alarm logging on the DS1 is enabled or disabled. If this object is true, detailed alarm logging for the DS1 will be enabled. If this object is false, detailed alarm logging for …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.35
vismDsx1AlarmLogAdminTimer This object specifies the time for which the detailed alarm logging for the DS1 will remain active. The value in this object can be set and is valid only if vismDsx1AlarmLogEnable for this DS1 is set to true. If this …	minutesUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.36
vismDsx1AlarmLogOperTimer This object specifies the time remaining in minutes for which the detailed alarm logging will remain active on the DS1. When this value becomes 0, it indicates that the DS1 has run through the time specified in vism…	minutesUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.37
vismDsx1ElectricalSignalEnable This object specifies whether electrical signal on the line is enabled or disabled. If the value of this object is 'true', electrical signal on the line is enabled. If the value of this object is 'false', electrical si…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.110.4.3.5.1.1.1.38

The VISM specific DS1/E1 statistics table. This table
contains the additional VISM statistics information
for DS1/E1.

dsx1VismStatsGrpEntry row .1.3.6.1.4.1.351.110.4.3.5.2.1.1

An entry in the VISM Dsx1 Statistics table.
This entry augments the corresponding entry in
the dsx1VismCnfGrpTable.

Indexes

No indexes recorded

Column	Syntax	OID
vismDsx1TotalTxUncontrolledSlips The number of accumulative uncontrolled slips in the transmit direction.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.5.2.1.1.1
vismDsx1TotalTxFrameSlips The number of accumulative frame slips in the transmit direction.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.5.2.1.1.2
vismDsx1TotalRxUncontrolledSlips The number of accumulative uncontrolled slips in the receive direction.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.5.2.1.1.3
vismDsx1TotalRxFrameSlips The number of accumulative frame slips in the receive direction.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.5.2.1.1.4
vismSlipCntDiscontinuityTime This object will represent the timestamp since sysUpTime when the statistics in this interval were discontinued. If this has the default value then it indicates that the statistics in this interval have not been disco…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.351.110.4.3.5.2.1.1.5