CISCO-UDLDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
8
.1.3.6.1.4.1.9.9.118.1.2.1 · 1 row entry · 8 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cudldpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-UDLDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-UDLDP-MIB::cudldpInterfaceTable'
The (conceptual) table containing the status
of UDLDP on the device's interfaces.
cudldpInterfaceEntry row .1.3.6.1.4.1.9.9.118.1.2.1.1
A conceptual row of cudldpInterfaceTable. An
entry exists for each interface that supports
UDLDP.
Indexes
Column Syntax OID
This variable is used to enable UDLDP on this
interface. If cudldpGlobalEnable is set to
'false' then this variable has no effect.
cudldpInterfaceEnable is deprecated and
replaced with cudldpInterfaceAdminMode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.118.1.2.1.1.1
This mib object contains the following values,
which has the meaning as:
'shutdown' - An Uni-Direction link has been
detected and the port has been
disabled.
'indetermin…
Enumeration
Enumerated Values:
1shutdown
2indeterminant
3biDirectional
4notApplicable
.1.3.6.1.4.1.9.9.118.1.2.1.1.2
An indication of whether the UDLDP aggressive mode
is enabled on this interface. If the
aggressive mode is set to 'true', an active port may
be shutdown in case of the abrupt loss of its
neighbor(s) because the loss …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.118.1.2.1.1.3
Indicates the Administrative mode of Uni Direction
Link Detection Protocol Feature configured on this
interface.

enable -- Uni Direction Link Detection Protocol is
enabled on this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
3aggressive
4default
.1.3.6.1.4.1.9.9.118.1.2.1.1.4
Indicates the operational mode of Uni Direction Link
Detection Protocol Feature on this interface.
Enumeration
Enumerated Values:
1enable
2disable
3aggressive
.1.3.6.1.4.1.9.9.118.1.2.1.1.5
This object specifies the fast hello interval at
which each port sends a hello packet to all of its
neighbors at steady state. By setting this object to
a positive value, this interface is enabled to send
UDLD hello …
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.118.1.2.1.1.6
This object indicates the operational interval value
at which each port sends a hello packet to all of its
neighbors at steady state.
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.118.1.2.1.1.7
This object indicates the operational status of
fast hello UDLD at this interface.
Enumeration
Enumerated Values:
1operational
2notOperational
.1.3.6.1.4.1.9.9.118.1.2.1.1.8