Standard view Table view

CISCO-UDLDP-MIB

        Cisco Uni Direction Link Detection Protocol
MIB
Source file
CISCO-UDLDP-MIB
Last revised
Identity
ciscoUdldpMIB
Base OID
1.3.6.1.4.1.9.9.118
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex ifName
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-UDLDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-UDLDP-MIB::ciscoUdldpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-UDLDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-UDLDP-MIB::ciscoUdldpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (29)
ciscoUdldpMIB
.1.3.6.1.4.1.9.9.118
ciscoUdldpMIBNotifs
.1.3.6.1.4.1.9.9.118.0
ciscoUdldpMIBObjects
.1.3.6.1.4.1.9.9.118.1
cudldpGlobal
.1.3.6.1.4.1.9.9.118.1.1
cudldpGlobalEnable deprecated r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.1.1
cudldpHelloInterval r/w
secondsInteger32
 .1.3.6.1.4.1.9.9.118.1.1.2
cudldpGlobalMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.118.1.1.3
cudldpHelloIntervalExt r/w
secondsUnsigned32
 .1.3.6.1.4.1.9.9.118.1.1.4
cudldpFastHelloLinkFailRptNotifEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.1.5
cudldpFastHelloStatusChangeNotifEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.1.6
cudldpInterface
.1.3.6.1.4.1.9.9.118.1.2
cudldpInterfaceTable
.1.3.6.1.4.1.9.9.118.1.2.1
cudldpInterfaceEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.118.1.2.1.1
cudldpInterfaceEnable deprecated r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.2.1.1.1
cudldpInterfaceOperStatus
Enumeration
 .1.3.6.1.4.1.9.9.118.1.2.1.1.2
cudldpInterfaceAggressiveMode deprecated r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.2.1.1.3
cudldpInterfaceAdminMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.118.1.2.1.1.4
cudldpInterfaceOperMode
Enumeration
 .1.3.6.1.4.1.9.9.118.1.2.1.1.5
cudldpIfFastHelloInterval r/w
millisecondsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.118.1.2.1.1.6
cudldpIfOperHelloInterval
millisecondsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.118.1.2.1.1.7
cudldpIfFastHelloOperStatus
Enumeration
 .1.3.6.1.4.1.9.9.118.1.2.1.1.8
cudldpFastHello
.1.3.6.1.4.1.9.9.118.1.3
cudldpFastHelloErrorReportEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.118.1.3.1
cudldpFastHelloMaxPorts
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.118.1.3.2
cudldpFastHelloConfigPorts
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.118.1.3.3
cudldpFastHelloOperationalPorts
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.118.1.3.4
ciscoUdldpMIBConformance
.1.3.6.1.4.1.9.9.118.3
ciscoUdldpMIBCompliances
.1.3.6.1.4.1.9.9.118.3.1
ciscoUdldpMIBGroups
.1.3.6.1.4.1.9.9.118.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-UDLDP-MIBciscoselected
Conformance Groups (6)
ciscoUdldpMIBGroup deprecated
cudldpGlobalEnable cudldpInterfaceEnable cudldpInterfaceOperStatus
A collection of objects for use with the Uni Direction
Link Detection Protocol.
 .1.3.6.1.4.1.9.9.118.3.2.1
ciscoUdldpAggreModeOptionalGroup deprecated
cudldpInterfaceAggressiveMode cudldpHelloInterval
A collection of optional objects providing UDLDP
aggressive mode configuration information.
 .1.3.6.1.4.1.9.9.118.3.2.2
ciscoUdldpMIBGroup2
cudldpGlobalMode cudldpInterfaceAdminMode cudldpInterfaceOperMode cudldpHelloInterval cudldpInterfaceOperStatus
A collection of objects providing Uni Direction
Link Detection Protocol information.
 .1.3.6.1.4.1.9.9.118.3.2.3
ciscoUdldpMIBGroup3
cudldpHelloIntervalExt
A collection of objects providing Uni Direction
Link Detection Protocol information.
 .1.3.6.1.4.1.9.9.118.3.2.4
ciscoUdldpFastHelloGroup
cudldpIfFastHelloInterval cudldpIfOperHelloInterval cudldpIfFastHelloOperStatus cudldpFastHelloErrorReportEnable cudldpFastHelloLinkFailRptNotifEnable cudldpFastHelloStatusChangeNotifEnable cudldpFastHelloMaxPorts cudldpFastHelloConfigPorts cudldpFastHelloOperationalPorts
A collection of objects which provides fast hello UDLD
information in the device.
 .1.3.6.1.4.1.9.9.118.3.2.5
ciscoUdldpFastHelloNotificationGroup
cudldpFastHelloLinkFailRptNotification cudldpFastHelloStatusChangeNotification
A collection of notifications which provides fast hello
UDLD notifications support in the device.
 .1.3.6.1.4.1.9.9.118.3.2.6
Compliance Statements (5)

OID .1.3.6.1.4.1.9.9.118.3.1.1
The compliance statement for the CISCO-UDLDP-MIB.
Required groups
mandatory ciscoUdldpMIBGroup

OID .1.3.6.1.4.1.9.9.118.3.1.2
The compliance statement for the CISCO-UDLDP-MIB.
Required groups
mandatory ciscoUdldpMIBGroup
optional ciscoUdldpAggreModeOptionalGroup This group is mandatory if the managed system
supports UDLDP aggressive mode feature.

OID .1.3.6.1.4.1.9.9.118.3.1.3
The compliance statement for the CISCO-UDLDP-MIB.
Required groups
mandatory ciscoUdldpMIBGroup2
Object refinements
ObjectAccessSyntaxDescription
cudldpGlobalMode
Enumeration
enable(1), disable(2)
The support of the value 'aggressive' is not
required if the global aggressive mode feature is
not supported on the device.
cudldpInterfaceAdminMode
Enumeration
enable(1), disable(2)
The support of the values 'aggressive' and/or
'default' is not required if the per interface
'aggressive' and/or 'default' mode feature
is not supported on the device.

OID .1.3.6.1.4.1.9.9.118.3.1.4
The compliance statement for the CISCO-UDLDP-MIB. This
compliance statement is deprecated and superceded by
ciscoUdldpMIBComplianceRev4.
Required groups
mandatory ciscoUdldpMIBGroup2
optional ciscoUdldpMIBGroup3 This group is mandatory only for platforms which support
the extended range of the hello interval (1..90).
Object refinements
ObjectAccessSyntaxDescription
cudldpGlobalMode
Enumeration
enable(1), disable(2)
The support of the value 'aggressive' is not
required if the global aggressive mode feature is
not supported on the device.
cudldpInterfaceAdminMode
Enumeration
enable(1), disable(2)
The support of the values 'aggressive' and/or
'default' is not required if the per interface
'aggressive' and/or 'default' mode feature
is not supported on the device.

OID .1.3.6.1.4.1.9.9.118.3.1.5
The compliance statement for the CISCO-UDLDP-MIB.
Required groups
mandatory ciscoUdldpMIBGroup2
optional ciscoUdldpMIBGroup3 This group is mandatory only for platforms which support
the extended range of the hello interval (1..90).
optional ciscoUdldpFastHelloGroup This group is mandatory where fast hello UDLD
is supported in the device.
optional ciscoUdldpFastHelloNotificationGroup This group is mandatory where fast hello UDLD
notification is supported in the device.
Object refinements
ObjectAccessSyntaxDescription
cudldpGlobalMode readonly
Enumeration
enable(1), disable(2)
The support of the value 'aggressive' is not
required if the global aggressive mode feature is
not supported on the device.

Support for read-write access is not required.
cudldpInterfaceAdminMode readonly
Enumeration
enable(1), disable(2)
The support of the values 'aggressive' and/or
'default' is not required if the per interface
'aggressive' and/or 'default' mode feature
is not supported on the device.

Support for read-write access is not required.
cudldpHelloInterval readonly
Support for read-write access is not required.
cudldpHelloIntervalExt readonly
Support for read-write access is not required.
cudldpFastHelloLinkFailRptNotifEnable readonly
Support for read-write access is not required.
cudldpFastHelloStatusChangeNotifEnable readonly
Support for read-write access is not required.
cudldpIfFastHelloInterval readonly
Support for read-write access is not required.
cudldpFastHelloErrorReportEnable readonly
Support for read-write access is not required.
Notifications / Traps (2)
NameOIDDescription
cudldpFastHelloLinkFailRptNotification
IF-MIBifName
.1.3.6.1.4.1.9.9.118.0.1
This notification is generated when UDLDP detects
a link failure on a fast hello UDLD link and the value of
cudldpFastHelloErrorReportEnable is 'true'. ifName
identifies the interface where the link failure is
detected.
cudldpFastHelloStatusChangeNotification
cudldpHelloInterval cudldpIfFastHelloInterval cudldpIfOperHelloInterval cudldpIfFastHelloOperStatus IF-MIBifName
.1.3.6.1.4.1.9.9.118.0.2
This notification is generated when there is a change
in the value of cudldpIfFastHelloOperStatus object.
cudldpHelloInterval provides the hello interval configured
at the device level. cudldpIfFastHelloInterval provides
the fast hello interval configured at the interface level.
cudldpIfOperHelloInterval indicates the hello interval
that is currently operational at this interface.
cudldpIfFastHelloOperStatus indicates the operational
status of UDLD fast hello at this interface. ifName
identifies the interface that trigger the generation of
this notification.