CISCO-SWITCH-MULTICAST-MIB Table View

A table containing multicast replication capability 
information.

cswmReplCapabilityEntry row .1.3.6.1.4.1.9.9.504.1.2.1.1

A conceptual row of cswmReplCapabilityTable, containing
the multicast replication capability information for
per module (identified by entPhysicalIndex) per Internet
address type supported on the managed system.
…

Indexes

ENTITY-MIBentPhysicalIndex cswmReplConfigAddrType

Column	Syntax	OID
cswmReplCapability Indicates the multicast replication capability. The replication capability of a module for a particular address type is dependent on the hardware and software capabilities of the module.	Bits Enumerated Values: 0 ingress 1 egress	.1.3.6.1.4.1.9.9.504.1.2.1.1.1

A table containing multicast flow replication information
for the device.

cswmReplConfigEntry row .1.3.6.1.4.1.9.9.504.1.2.2.1

A conceptual row of cswmReplConfigTable, containing multicast
flow replication information.

Indexes

cswmReplConfigAddrType

Column	Syntax	OID
cswmReplConfigAddrType The Internet address type supporting multicast flow replication.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.504.1.2.2.1.1
cswmReplConfigCurMode Specifies the current mode of multicast flow replication for this address type. 'notCapable' - This device is not capable of Multicast flow replication for this address type. …	Enumerationr/w Enumerated Values: 1 notCapable 2 ingress 3 egressAndIngress	.1.3.6.1.4.1.9.9.504.1.2.2.1.2
cswmReplConfigAutoDetect Specifies the auto-detection of multicast replication mode for this address type. 'notCapable' - This device is not capable of Auto-detection of multicast replication mode for this …	Enumerationr/w Enumerated Values: 1 notCapable 2 enable 3 disable	.1.3.6.1.4.1.9.9.504.1.2.2.1.3

A table containing multicast flow statistics information on 
each Multicast VPN routing/forwarding instance (MVRF).

cswmMvrfStatsEntry row .1.3.6.1.4.1.9.9.504.1.3.1.1

A conceptual row of cswmMvrfStatsTable, containing
multicast flow statistics for each MVRF.

Indexes

cswmMvrfName

Column	Syntax	OID
cswmMvrfName The human-readable name of this VPN.	MPLS-VPN-MIBMplsVpnId Type Constraints: range: 0..31	.1.3.6.1.4.1.9.9.504.1.3.1.1.1
cswmMvrfTotalFlows Indicates the total number of multicast flow entries installed for this MVRF.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.3.1.1.2
cswmMvrfPartialFlows Indicates the total number of multicast partial short cut flow entries installed for this MVRF.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.3.1.1.3
cswmMvrfRpfMfdFlows Indicates the total number of Reverse Path Forwarding(RPF) Multicast Fast Drop(MFD) flow entries installed for this MVRF.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.3.1.1.4

A table containing multicast Bi-directional PIM 
Designated Forwarder usage information on 
each Multicast VPN routing/forwarding instance (MVRF)
for every Internet address type supported.

cswmMvrfBiDirPimDfUsageEntry row .1.3.6.1.4.1.9.9.504.1.4.3.1

A conceptual row of cswmMvrfBiDirPimDfUsageTable, containing
multicast Bi-directional PIM Designated Forwarder
usage information on each MVRF per Internet address type.

Indexes

cswmMvrfName cswmMvrfBiDirPimDfAddrType

Column	Syntax	OID
cswmMvrfBiDirPimDfAddrType This object indicates the internet address type for which the multicast Bi-directional PIM Designated Forwarder usage information is collected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.504.1.4.3.1.1
cswmMvrfBiDirPimDfUsed The number of Bi-directional PIM Designated Forwarder entries currently in use.	entriesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.4.3.1.2
cswmMvrfBiDirPimDfTotal The total number of Bi-directional PIM Designated Forwarder entries.	entriesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.4.3.1.3

A table containing multicast forwarding information.

cswmForwardingEntry row .1.3.6.1.4.1.9.9.504.1.6.1.1

A conceptual row of cswmForwardingTable, containing multicast
forwarding information on a particular interface for every
Internet address type supported.

Indexes

cswmInterfaceIndex cswmForwardingAddrType

Column	Syntax	OID
cswmInterfaceIndex This object specifies the ifIndex for interface capable of performing forwarding.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.504.1.6.1.1.1
cswmForwardingAddrType This object specifies the internet address type of the multicast forwarding.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.504.1.6.1.1.2
cswmForwardingEnabled This object specifies whether multicast forwarding is supported on this interface for a particular internet address type. 'notCapable' - A read-only value which indicates that thi…	Enumerationr/w Enumerated Values: 1 notCapable 2 enable 3 disable	.1.3.6.1.4.1.9.9.504.1.6.1.1.3

A control table used to query the switching engine by
specifying retrieval criteria for IP multicast L3 flows.
Each row instance in the table represents a query with
its parameters.  The resulting per-flow data if requested
for each instance of a query in this table is returned
in the cswmFlowResultTable.
          
A row in this table can be created by setting the corresponding
instance of cswmFlowQueryStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
cswmFlowQueryStatus to 'destroy'.
          
The maximum number of entries (rows) in this table cannot
exceed the value of cswmFlowMaxQueries object.

cswmFlowQueryEntry row .1.3.6.1.4.1.9.9.504.1.7.2.1

A conceptual row of the cswmFlowQueryTable used to
setup retrieval criteria to search for IP multicast L3
flows on a switching engine entity in the device.

Indexes

cswmFlowQueryIndex

Column	Syntax	OID
cswmFlowQueryIndex An arbitrary integer in the range of 1 to cswmFlowMaxQueries to identify this control query.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.504.1.7.2.1.1
cswmFlowQueryMask This object is used to set up the query criteria for the multicast flows of interest. If any one of the defined BITs is set, then the objects(s) corresponding to the BITS in the same row instance will be used for the …	Bitsr/w Enumerated Values: 0 vrf 1 group 2 groupmask 3 source	.1.3.6.1.4.1.9.9.504.1.7.2.1.2
cswmFlowQueryMvrf The human-readable name of the Multicast Virtual Private Network (MVPN) routing/forwarding instance (MVRF). When the 'mvrf' bit of cswmFlowQueryMask object in the same row is on, an appropriate value should be specifie…	MPLS-VPN-MIBMplsVpnIdr/w Type Constraints: range: 0..31	.1.3.6.1.4.1.9.9.504.1.7.2.1.3
cswmFlowQueryAddrType The Internet address type for this multicast search query.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.504.1.7.2.1.4
cswmFlowQuerySource The source Internet address of the IP multicast layer 3 flows. When the 'source' BIT of cswmFlowQueryMask object in the same row is on, an appropriate value should be specified and only flows with the specified source …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.504.1.7.2.1.5
cswmFlowQueryGroup The multicast group Internet address of the queried flows. When the 'group' or 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriate value should be specified and only flows with the specif…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.504.1.7.2.1.6
cswmFlowQueryGroupMask The length of the Prefix associated with cswmFlowQueryGroup. When the 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriate value should be specified and only rows with the specied group ad…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.504.1.7.2.1.7
cswmFlowQueryType This object is used to set up the query type for the multicast flows of interest. If the 'perFlow' BIT is set, then, the entries matching this query will be returned in in cswmFlowResultTable. If the 'p…	Bitsr/w Enumerated Values: 0 perFlow 1 oifList 2 dfList	.1.3.6.1.4.1.9.9.504.1.7.2.1.8
cswmFlowQueryEntityIndex This object identifies the switching engine for which the query is issued. When the value of this object is 0, the query is performed on the switching engine of the active supervisor.	CISCO-TCEntPhysicalIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.504.1.7.2.1.9
cswmFlowQuerySkipNFlows The number of searched flows to be skipped before storing any multicast flows in cswmFlowResultTable, when the 'perFlow' bit is set in cswmFlowQueryType. This object can be used along with cswmFlowMcastQ…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.504.1.7.2.1.10
cswmFlowQueryTotalFlows The number of flows matching the query criteria. The value of this object will be zero when the 'perFlow' bit is set in cswmFlowQueryType.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.504.1.7.2.1.11
cswmFlowMcastQueryRows Indicating the status of the query by following values: -1 - Either the query has not been started or the agent is still processing this query instance. It is the default value when the row is instantiated. …	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.9.9.504.1.7.2.1.12
cswmFlowMcastQueryMoreRows If the value of the object is true when there are more entries available matching this query criteria, than the ones returned in cswmFlowResultTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.504.1.7.2.1.13
cswmFlowQueryOwner The manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the owner of a resource. It is recommended that this object ha…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.504.1.7.2.1.14
cswmFlowQueryCreateTime Time when this query was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.504.1.7.2.1.15
cswmFlowQueryStorage The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.504.1.7.2.1.16
cswmFlowQueryStatus The status object used to manage rows in this table. When set to 'active', the query to search for l3 multicast flows is initiated. Once a row becomes active, values within the row cannot be modified, except by deletin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.504.1.7.2.1.17

A table containing current IP multicast flow information
corresponding to all the completed queries set up in
the cswmFlowQueryTable, that were initiated on the switch
engine(s) with the 'perFlow' bit set in cswmFlowQueryType.  
The query result will not become available until
the current search completes.

cswmFlowResultEntry row .1.3.6.1.4.1.9.9.504.1.7.3.1

A conceptual row of cswmFlowResultTable, containing
information about an IP multicast layer 3 flow that matchs
the search criteria set in the corresponding row of
cswmFlowQueryTable. This row instance is indexed by
the…

Indexes

cswmFlowQueryIndex cswmFlowResultIndex

Column	Syntax	OID
cswmFlowResultIndex A positive integer which uniquely identify a result entry matching a particular query.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.504.1.7.3.1.1
cswmFlowResultMvrf The MVRF to which this flow belongs to.	MPLS-VPN-MIBMplsVpnId Type Constraints: range: 0..31	.1.3.6.1.4.1.9.9.504.1.7.3.1.2
cswmFlowResultAddrType The Internet address type of cswmFlowResultGroup, cswmFlowResultGroupMask and cswmFlowResultSource.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.504.1.7.3.1.3
cswmFlowResultGroup The group address of the multicast layer 3 flow.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.504.1.7.3.1.4
cswmFlowResultGroupMask The length of the Prefix associated with cswmFlowResultGroup. A value of zero causes all addresses to match. This prefix length will be consistent with the type specified in cswmFlowResultAddrType.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.504.1.7.3.1.5
cswmFlowResultSource The source address of the multicast layer 3 flow.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.504.1.7.3.1.6
cswmFlowResultFlags This object indicates the corresponding flags for this flow: 'copy' - indicates that traffic is copied to CPU and forwarded in hardware. 'punt' - indicates that t…	Bits Enumerated Values: 0 copy 1 punt 2 ineligible 3 hwFail 4 bidir	.1.3.6.1.4.1.9.9.504.1.7.3.1.7
cswmFlowResultRpfInterface This object represents either the InterfaceIndex of RPF interface for a RPF flow or 0 (zero). The value of zero means that this flow is a non-RPF flow.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.504.1.7.3.1.8
cswmFlowResultPackets The total number of multicast traffic packets forwarded for this flow.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.504.1.7.3.1.11
cswmFlowResultOctets The total number of multicast traffic octets forwarded for this flow.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.504.1.7.3.1.12

A table containing list of OIF
for a flow listed in cswmFlowResultTable.

cswmFlowResultOIFEntry row .1.3.6.1.4.1.9.9.504.1.7.4.1

A conceptual row of cswmFlowResultOIFTable, containing
information about the list of OIF for a flow
listed in cswmFlowResultTable. An entry is created
only when the 'oifList' bit is set in cswmFlowQueryType.

Indexes

cswmFlowQueryIndex cswmFlowResultIndex cswmFlowResultOIFIndex

Column	Syntax	OID
cswmFlowResultOIFIndex A positive integer which uniquely identifies a list of OIF for a particular result flow matching a particular query.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.504.1.7.4.1.1
cswmFlowResultOIFIntList The object lists the ifIndex for a set of 64 OIF for a particular flow.	CISCO-TCCiscoInterfaceIndexList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.504.1.7.4.1.2

A table containing list of DF interfaces for a flow
listed in cswmFlowResultTable.

cswmFlowResultDFEntry row .1.3.6.1.4.1.9.9.504.1.7.5.1

A conceptual row of cswmFlowResultDFTable, containing
information about the list of DF Interfaces for a flow
listed in cswmFlowResultTable. An entry is created
only when the 'dfList' bit is set in cswmFlowQueryType.

Indexes

cswmFlowQueryIndex cswmFlowResultIndex cswmFlowResultDFIndex

Column	Syntax	OID
cswmFlowResultDFIndex A positive integer which uniquely identifies a list of DF interfaces for a particular flow matching a particular query.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.504.1.7.5.1.1
cswmFlowResultDFIntList The object lists the ifIndex for a set of 64 DF interfaces for a particular flow.	CISCO-TCCiscoInterfaceIndexList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.504.1.7.5.1.2