CISCO-STP-EXTENSIONS-MIB

Monitored by Observium
        The MIB module for managing Cisco extensions to
the 802.1D Spanning Tree Protocol (STP).
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Discovery Polling Status
Explore Observium network monitoring
Source file
CISCO-STP-EXTENSIONS-MIB
Last revised
Identity
ciscoStpExtensionsMIB
Base OID
1.3.6.1.4.1.9.9.82
Imported Objects
BRIDGE-MIB dot1dStpPortEntry
CISCO-SMI ciscoMgmt
CISCO-VTP-MIB VlanIndex vlanTrunkPortEntry vtpVlanEditEntry vtpVlanEntry
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-STP-EXTENSIONS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-STP-EXTENSIONS-MIB::ciscoStpExtensionsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-STP-EXTENSIONS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-STP-EXTENSIONS-MIB::ciscoStpExtensionsMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (210)
8 directly used by Observium
.1.3.6.1.4.1.9.9.82
.1.3.6.1.4.1.9.9.82.1
.1.3.6.1.4.1.9.9.82.1.1
.1.3.6.1.4.1.9.9.82.1.1.1
.1.3.6.1.4.1.9.9.82.1.1.2
framesInteger32
.1.3.6.1.4.1.9.9.82.1.1.3
.1.3.6.1.4.1.9.9.82.1.1.4
.1.3.6.1.4.1.9.9.82.1.1.5
.1.3.6.1.4.1.9.9.82.1.10
.1.3.6.1.4.1.9.9.82.1.10.1
.1.3.6.1.4.1.9.9.82.1.10.2
.1.3.6.1.4.1.9.9.82.1.10.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.10.2.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.10.2.1.2
.1.3.6.1.4.1.9.9.82.1.10.2.1.3
.1.3.6.1.4.1.9.9.82.1.10.2.1.4
.1.3.6.1.4.1.9.9.82.1.10.2.1.5
.1.3.6.1.4.1.9.9.82.1.11
Integer32
.1.3.6.1.4.1.9.9.82.1.11.1
.1.3.6.1.4.1.9.9.82.1.11.10
.1.3.6.1.4.1.9.9.82.1.11.10.1
OctetString
.1.3.6.1.4.1.9.9.82.1.11.10.1.1
stpxMSTPortTable deprecated
.1.3.6.1.4.1.9.9.82.1.11.11
stpxMSTPortEntry deprecated
.1.3.6.1.4.1.9.9.82.1.11.11.1
stpxMSTPortIndex deprecated
Integer32
.1.3.6.1.4.1.9.9.82.1.11.11.1.1
stpxMSTPortAdminLinkType deprecated r/w
Enumeration
.1.3.6.1.4.1.9.9.82.1.11.11.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.11.11.1.3
.1.3.6.1.4.1.9.9.82.1.11.11.1.4
stpxMSTPortStatus deprecated
Bits
.1.3.6.1.4.1.9.9.82.1.11.11.1.5
.1.3.6.1.4.1.9.9.82.1.11.12
.1.3.6.1.4.1.9.9.82.1.11.12.1
Integer32
.1.3.6.1.4.1.9.9.82.1.11.12.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.11.12.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.11.12.1.3
stpxMSTMaxHopCount deprecated r/w
Integer32
.1.3.6.1.4.1.9.9.82.1.11.13
OctetString
.1.3.6.1.4.1.9.9.82.1.11.2
Integer32
.1.3.6.1.4.1.9.9.82.1.11.3
.1.3.6.1.4.1.9.9.82.1.11.4
.1.3.6.1.4.1.9.9.82.1.11.4.1
Integer32
.1.3.6.1.4.1.9.9.82.1.11.4.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.11.4.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.11.4.1.3
OctetString
.1.3.6.1.4.1.9.9.82.1.11.4.1.4
OctetString
.1.3.6.1.4.1.9.9.82.1.11.4.1.5
Integer32
.1.3.6.1.4.1.9.9.82.1.11.4.1.6
Enumeration
.1.3.6.1.4.1.9.9.82.1.11.5
Enumeration
.1.3.6.1.4.1.9.9.82.1.11.6
OctetString
.1.3.6.1.4.1.9.9.82.1.11.7
stpxMSTRegionEditRevision deprecated r/w
Integer32
.1.3.6.1.4.1.9.9.82.1.11.8
.1.3.6.1.4.1.9.9.82.1.11.9
.1.3.6.1.4.1.9.9.82.1.11.9.1
Integer32
.1.3.6.1.4.1.9.9.82.1.11.9.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.11.9.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.11.9.1.3
OctetString
.1.3.6.1.4.1.9.9.82.1.11.9.1.4
OctetString
.1.3.6.1.4.1.9.9.82.1.11.9.1.5
.1.3.6.1.4.1.9.9.82.1.12
.1.3.6.1.4.1.9.9.82.1.12.1
.1.3.6.1.4.1.9.9.82.1.12.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.12.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.82.1.12.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.12.1.1.3
.1.3.6.1.4.1.9.9.82.1.12.1.1.4
.1.3.6.1.4.1.9.9.82.1.12.2
.1.3.6.1.4.1.9.9.82.1.12.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.12.2.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.12.2.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.12.2.1.3
.1.3.6.1.4.1.9.9.82.1.12.3
.1.3.6.1.4.1.9.9.82.1.13
.1.3.6.1.4.1.9.9.82.1.13.1
.1.3.6.1.4.1.9.9.82.1.13.1.1
.1.3.6.1.4.1.9.9.82.1.13.1.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.13.1.1.2
Bits
.1.3.6.1.4.1.9.9.82.1.13.1.1.3
.1.3.6.1.4.1.9.9.82.1.14
.1.3.6.1.4.1.9.9.82.1.14.1
.1.3.6.1.4.1.9.9.82.1.14.10
.1.3.6.1.4.1.9.9.82.1.14.2
.1.3.6.1.4.1.9.9.82.1.14.3
.1.3.6.1.4.1.9.9.82.1.14.4
.1.3.6.1.4.1.9.9.82.1.14.5
.1.3.6.1.4.1.9.9.82.1.14.5.1
.1.3.6.1.4.1.9.9.82.1.14.5.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.14.5.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.14.5.1.3
Integer32
.1.3.6.1.4.1.9.9.82.1.14.5.1.4
OctetString
.1.3.6.1.4.1.9.9.82.1.14.5.1.5
.1.3.6.1.4.1.9.9.82.1.14.5.1.6
.1.3.6.1.4.1.9.9.82.1.14.6
.1.3.6.1.4.1.9.9.82.1.14.6.1
.1.3.6.1.4.1.9.9.82.1.14.6.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.14.6.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.14.6.1.3
.1.3.6.1.4.1.9.9.82.1.14.6.1.4
.1.3.6.1.4.1.9.9.82.1.14.7
.1.3.6.1.4.1.9.9.82.1.14.7.1
Integer32
.1.3.6.1.4.1.9.9.82.1.14.7.1.1
Bits
.1.3.6.1.4.1.9.9.82.1.14.7.1.2
hundredth of secondsSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.9.9.82.1.14.7.1.3
hundredth of secondsSNMPv2-SMIUnsigned32
.1.3.6.1.4.1.9.9.82.1.14.7.1.4
hundredth of secondsInteger32
.1.3.6.1.4.1.9.9.82.1.14.7.1.5
Enumeration
.1.3.6.1.4.1.9.9.82.1.14.7.1.6
Enumeration
.1.3.6.1.4.1.9.9.82.1.14.7.1.7
.1.3.6.1.4.1.9.9.82.1.14.8
.1.3.6.1.4.1.9.9.82.1.14.9
.1.3.6.1.4.1.9.9.82.1.16
.1.3.6.1.4.1.9.9.82.1.16.1
.1.3.6.1.4.1.9.9.82.1.2
.1.3.6.1.4.1.9.9.82.1.2.1
.1.3.6.1.4.1.9.9.82.1.2.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.2.1.1.1
OctetString
.1.3.6.1.4.1.9.9.82.1.2.1.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.2.1.1.3
OctetString
.1.3.6.1.4.1.9.9.82.1.2.1.1.4
.1.3.6.1.4.1.9.9.82.1.2.2
.1.3.6.1.4.1.9.9.82.1.2.2.1
.1.3.6.1.4.1.9.9.82.1.2.2.1.1
stpxPVSTVlanEnable OBS ✓ r/w
Enumeration
.1.3.6.1.4.1.9.9.82.1.2.2.1.2
.1.3.6.1.4.1.9.9.82.1.3
.1.3.6.1.4.1.9.9.82.1.3.1
.1.3.6.1.4.1.9.9.82.1.3.1.1
.1.3.6.1.4.1.9.9.82.1.3.1.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.3.1.1.2
Bits
.1.3.6.1.4.1.9.9.82.1.3.1.1.3
.1.3.6.1.4.1.9.9.82.1.3.2
.1.3.6.1.4.1.9.9.82.1.3.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.3.2.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.3.2.1.2
Bits
.1.3.6.1.4.1.9.9.82.1.3.2.1.3
.1.3.6.1.4.1.9.9.82.1.4
.1.3.6.1.4.1.9.9.82.1.4.1
.1.3.6.1.4.1.9.9.82.1.4.2
.1.3.6.1.4.1.9.9.82.1.4.3
.1.3.6.1.4.1.9.9.82.1.4.4
.1.3.6.1.4.1.9.9.82.1.4.5
.1.3.6.1.4.1.9.9.82.1.4.6
.1.3.6.1.4.1.9.9.82.1.4.7
.1.3.6.1.4.1.9.9.82.1.5
.1.3.6.1.4.1.9.9.82.1.5.1
.1.3.6.1.4.1.9.9.82.1.5.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.5.1.1.1
.1.3.6.1.4.1.9.9.82.1.5.1.1.2
.1.3.6.1.4.1.9.9.82.1.5.2
.1.3.6.1.4.1.9.9.82.1.5.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.5.2.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.5.2.1.2
.1.3.6.1.4.1.9.9.82.1.5.2.1.3
.1.3.6.1.4.1.9.9.82.1.6
stpxSpanningTreeType OBS ✓ r/w
Enumeration
.1.3.6.1.4.1.9.9.82.1.6.1
Enumeration
.1.3.6.1.4.1.9.9.82.1.6.2
.1.3.6.1.4.1.9.9.82.1.6.3
.1.3.6.1.4.1.9.9.82.1.6.3.1
.1.3.6.1.4.1.9.9.82.1.6.3.1.1
.1.3.6.1.4.1.9.9.82.1.6.4
.1.3.6.1.4.1.9.9.82.1.6.5
Bits
.1.3.6.1.4.1.9.9.82.1.6.6
Enumeration
.1.3.6.1.4.1.9.9.82.1.6.7
.1.3.6.1.4.1.9.9.82.1.7
Integer32
.1.3.6.1.4.1.9.9.82.1.7.1
.1.3.6.1.4.1.9.9.82.1.7.2
.1.3.6.1.4.1.9.9.82.1.7.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.7.2.1.1
.1.3.6.1.4.1.9.9.82.1.7.2.1.2
OctetString
.1.3.6.1.4.1.9.9.82.1.7.2.1.3
OctetString
.1.3.6.1.4.1.9.9.82.1.7.2.1.4
OctetString
.1.3.6.1.4.1.9.9.82.1.7.2.1.5
OctetString
.1.3.6.1.4.1.9.9.82.1.7.2.1.6
.1.3.6.1.4.1.9.9.82.1.7.3
.1.3.6.1.4.1.9.9.82.1.7.3.1
Integer32
.1.3.6.1.4.1.9.9.82.1.7.3.1.1
.1.3.6.1.4.1.9.9.82.1.7.4
.1.3.6.1.4.1.9.9.82.1.7.4.1
Integer32
.1.3.6.1.4.1.9.9.82.1.7.4.1.1
.1.3.6.1.4.1.9.9.82.1.7.5
.1.3.6.1.4.1.9.9.82.1.7.5.1
OctetString
.1.3.6.1.4.1.9.9.82.1.7.5.1.1
.1.3.6.1.4.1.9.9.82.1.8
.1.3.6.1.4.1.9.9.82.1.8.1
.1.3.6.1.4.1.9.9.82.1.8.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.8.1.1.1
.1.3.6.1.4.1.9.9.82.1.8.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.8.1.1.3
.1.3.6.1.4.1.9.9.82.1.8.2
.1.3.6.1.4.1.9.9.82.1.8.2.1
Integer32
.1.3.6.1.4.1.9.9.82.1.8.2.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.8.2.1.2
.1.3.6.1.4.1.9.9.82.1.8.2.1.3
Enumeration
.1.3.6.1.4.1.9.9.82.1.8.3
.1.3.6.1.4.1.9.9.82.1.9
.1.3.6.1.4.1.9.9.82.1.9.1
.1.3.6.1.4.1.9.9.82.1.9.2
.1.3.6.1.4.1.9.9.82.1.9.3
.1.3.6.1.4.1.9.9.82.1.9.3.1
Integer32
.1.3.6.1.4.1.9.9.82.1.9.3.1.1
stpxFastStartPortEnable deprecated r/w
.1.3.6.1.4.1.9.9.82.1.9.3.1.2
stpxFastStartPortMode OBS ✓ r/w
Enumeration
.1.3.6.1.4.1.9.9.82.1.9.3.1.3
Enumeration
.1.3.6.1.4.1.9.9.82.1.9.3.1.4
Enumeration
.1.3.6.1.4.1.9.9.82.1.9.3.1.5
Enumeration
.1.3.6.1.4.1.9.9.82.1.9.4
.1.3.6.1.4.1.9.9.82.1.9.5
.1.3.6.1.4.1.9.9.82.1.9.5.1
Integer32
.1.3.6.1.4.1.9.9.82.1.9.5.1.1
Integer32
.1.3.6.1.4.1.9.9.82.1.9.5.1.2
Enumeration
.1.3.6.1.4.1.9.9.82.1.9.5.1.3
.1.3.6.1.4.1.9.9.82.2
.1.3.6.1.4.1.9.9.82.2.0
.1.3.6.1.4.1.9.9.82.3
.1.3.6.1.4.1.9.9.82.3.1
.1.3.6.1.4.1.9.9.82.3.2
Dependencies (13) 6 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
OctetString range: 16
Conformance Groups (46)
A collection of objects for managing the UplinkFast
capability.
.1.3.6.1.4.1.9.9.82.3.2.1
A collection of objects for indicating preferred VLANs.
.1.3.6.1.4.1.9.9.82.3.2.2
A collection of objects to support Cisco's Shared Spanning
Tree Protocol (SSTP).
.1.3.6.1.4.1.9.9.82.3.2.3
The notifications which a STP extension implementation is
required to implement.
.1.3.6.1.4.1.9.9.82.3.2.4
A collection of objects for managing the BackboneFast
capability.
.1.3.6.1.4.1.9.9.82.3.2.5
A collection of objects to support root guard
capabilities.
.1.3.6.1.4.1.9.9.82.3.2.6
The notifications which a STP root guard
implementation is required to implement.
.1.3.6.1.4.1.9.9.82.3.2.7
A collection of objects providing information
for VLANS with VlanIndex from 1024 to 4095.
.1.3.6.1.4.1.9.9.82.3.2.8
An object selecting what kind of spanning tree protocol.
.1.3.6.1.4.1.9.9.82.3.2.9
A collection objects managing the information of
MISTP feature.
.1.3.6.1.4.1.9.9.82.3.2.10
A collection objects managing the information of
spanning tree path cost in 32 bits value.
.1.3.6.1.4.1.9.9.82.3.2.11
A collection of objects managing the information
of Spanning Tree PVST+ protocol VLAN configuration.
.1.3.6.1.4.1.9.9.82.3.2.12
A collection objects managing the information of
MISTP instances to VLAN mapping with the range of
VlanIndex up to 4095.
.1.3.6.1.4.1.9.9.82.3.2.13
A collection of objects to support LoopGuard
capabilities.
.1.3.6.1.4.1.9.9.82.3.2.14
The notifications which a STP LoopGuard
implementation is required to implement.
.1.3.6.1.4.1.9.9.82.3.2.15
A collection of objects to support Spanning Tree Port
Fast Start feature.
.1.3.6.1.4.1.9.9.82.3.2.16
This is an optional group with a collection of
objects to support Spanning Tree BPDU Skewing feature.
.1.3.6.1.4.1.9.9.82.3.2.17
An optional group with a collection of objects to
support Fast Start global default mode on the device.
.1.3.6.1.4.1.9.9.82.3.2.18
An optional group with a collection of objects to
support Loop Guard global default mode on the device.
.1.3.6.1.4.1.9.9.82.3.2.19
stpxMSTGroup deprecated
An optional group with a collection of objects to
support Multiple Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.20
An optional group with a collection of objects to
support Preferred MST Instance Map feature for Multiple
Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.21
An optional group with a collection of objects to
support per port Bpdu Guard and Bpdu Filter mode
configuration on the device.
.1.3.6.1.4.1.9.9.82.3.2.22
An optional group with a collection of objects to
manage the UplinkFast capability.
.1.3.6.1.4.1.9.9.82.3.2.23
An optional group with a collection of objects to
manage the BackboneFast capability.
.1.3.6.1.4.1.9.9.82.3.2.24
stpxMSTGroup2 deprecated
An optional group with a collection of objects to
support Multiple Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.25
An optional group with a collection of objects to
support Rapid Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.26
An optional group with a collection of objects to
support Rapid PVST+ on the device.
.1.3.6.1.4.1.9.9.82.3.2.27
A collection of objects to manage the
Extended System ID capability.
.1.3.6.1.4.1.9.9.82.3.2.28
A collection of objects providing control on the
generation of Spanning Tree notifications.
.1.3.6.1.4.1.9.9.82.3.2.29
A collection of objects providing Spanning Tree
Port Fast Start Operatioanl information on a port.
.1.3.6.1.4.1.9.9.82.3.2.30
stpxMSTGroup3 deprecated
A collection of objects providing support
for Multiple Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.31
A collection of objects providing support for
IEEE MST on the device.
.1.3.6.1.4.1.9.9.82.3.2.32
A collection of objects providing support for
MST instance information for IEEE MST on the device.
.1.3.6.1.4.1.9.9.82.3.2.33
A collection of objects providing support for MST
instance edit information for IEEE MST on the device.
.1.3.6.1.4.1.9.9.82.3.2.34
A collection of objects providing support for
port status information for MST Protocol on the
device.
.1.3.6.1.4.1.9.9.82.3.2.35
A collection of objects providing support for per
port hello time information for IEEE MST on the device.
.1.3.6.1.4.1.9.9.82.3.2.36
A collection of objects providing information about
Common and Internal Spanning Tree (CIST) for IEEE
MST on the device.
.1.3.6.1.4.1.9.9.82.3.2.37
A collection of objects providing information about
operational spanning tree path cost mode.
.1.3.6.1.4.1.9.9.82.3.2.38
A collection of objects providing information for
configuration of transmit hold count for Rapid Spanning
Tree Protocol.
.1.3.6.1.4.1.9.9.82.3.2.39
A collection of objects providing information for port
MST mode configuration on the device.
.1.3.6.1.4.1.9.9.82.3.2.40
A collection of objects providing information for
configuration of IEEE MST maximum hop count.
.1.3.6.1.4.1.9.9.82.3.2.41
A collection of objects providing information for
MST configuration digests on the device.
.1.3.6.1.4.1.9.9.82.3.2.42
A collection of objects providing support
for Multiple Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.43
A collection of objects providing information
for layer2 gateway spanning tree domain identifier on
the device.
.1.3.6.1.4.1.9.9.82.3.2.44
A collection of objects providing inconsistency information
for Multiple Spanning Tree Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.45
A collection of notifications for Multiple Spanning Tree
Protocol on the device.
.1.3.6.1.4.1.9.9.82.3.2.46
Compliance Statements (13)

OID .1.3.6.1.4.1.9.9.82.3.1.1
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.

OID .1.3.6.1.4.1.9.9.82.3.1.2
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.

OID .1.3.6.1.4.1.9.9.82.3.1.3
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.

OID .1.3.6.1.4.1.9.9.82.3.1.4
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.

OID .1.3.6.1.4.1.9.9.82.3.1.5
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopGuardGroup This group is mandatory for implementations
of the LoopGuard capability.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxFastStartGroup This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.

OID .1.3.6.1.4.1.9.9.82.3.1.6
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxMSTGroup This group is optional for implementation of
Multiple Spanning Tree Protocol feature.
optional stpxPreferredMSTInstancesGroup This group is optional for implementations
of Preferred MST Instance Map feature.

OID .1.3.6.1.4.1.9.9.82.3.1.7
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxPreferredMSTInstancesGroup This group is optional for implementations
of Preferred MST Instance Map feature.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxMSTGroup2 This group is optional for implementation of
Multiple Spanning Tree Protocol feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.

OID .1.3.6.1.4.1.9.9.82.3.1.8
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxPreferredMSTInstancesGroup This group is optional for implementations
of Preferred MST Instance Map feature.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxMSTGroup2 This group is optional for implementation of
Multiple Spanning Tree Protocol feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.

OID .1.3.6.1.4.1.9.9.82.3.1.9
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.
optional stpxMSTGroup3 This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device.
optional stpxSMSTGroup This group is mandatory for implementation of
supporting IEEE MST on the device.
optional stpxSMSTInstanceGroup This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device.
optional stpxSMSTInstanceEditGroup This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device.
optional stpxSMSTPortStatusGroup This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device.
optional stpxSMSTPortHelloTimeGroup This group is mandatory for implementation of
port hello time information for IEEE MST
on the device.

OID .1.3.6.1.4.1.9.9.82.3.1.10
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.
optional stpxMSTGroup3 This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device.
optional stpxSMSTGroup This group is mandatory for implementation of
supporting IEEE MST on the device.
optional stpxSMSTInstanceGroup This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device.
optional stpxSMSTInstanceEditGroup This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device.
optional stpxSMSTPortStatusGroup This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device.
optional stpxSMSTPortHelloTimeGroup This group is mandatory for implementation of
port hello time information for IEEE MST
on the device.
optional stpxSMSTInstanceCISTGroup This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device.

OID .1.3.6.1.4.1.9.9.82.3.1.11
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.
optional stpxMSTGroup3 This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device.
optional stpxSMSTGroup This group is mandatory for implementation of
supporting IEEE MST on the device.
optional stpxSMSTInstanceGroup This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device.
optional stpxSMSTInstanceEditGroup This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device.
optional stpxSMSTPortStatusGroup This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device.
optional stpxSMSTPortHelloTimeGroup This group is mandatory for implementation of
port hello time information for IEEE MST
on the device.
optional stpxSMSTInstanceCISTGroup This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device.
optional stpxPathCostOperModeGroup This group is mandatory for implementation of
supporting operational spanning tree path cost
mode.

OID .1.3.6.1.4.1.9.9.82.3.1.12
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRSTPTransmitHoldCountGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.
optional stpxMSTGroup4 This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device.
optional stpxSMSTGroup This group is mandatory for implementation of
supporting IEEE MST on the device.
optional stpxSMSTMaxHopCountGroup This group is mandatory for implementation of
maximum hop count configuration on the device.
optional stpxSMSTInstanceGroup This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device.
optional stpxSMSTInstanceEditGroup This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device.
optional stpxSMSTPortStatusGroup This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device.
optional stpxSMSTPortHelloTimeGroup This group is mandatory for implementation of
port hello time information for IEEE MST
on the device.
optional stpxSMSTInstanceCISTGroup This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device.
optional stpxPathCostOperModeGroup This group is mandatory for implementation of
supporting operational spanning tree path cost
mode.
optional stpxSMSTPortMSTModeGroup This group is mandatory for implementation of
supporting port MST mode configuration.
optional stpxSMSTConfigDigestGroup This group is optional for implementation of
supporting IEEE MST on the device.

OID .1.3.6.1.4.1.9.9.82.3.1.13
The compliance statement for entities which implement
Cisco STP Extensions MIB.
Required groups
optional stpxUplinkGroup This group is mandatory for implementations
of the UplinkFast capability.
optional stpxSstpGroup This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP).
optional stpxPreferredVlansGroup This group is mandatory for implementations
of the Preferred VLANs capability.
optional stpxNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpxBackboneGroup This group is mandatory for implementations
of the BackboneFast capability.
optional stpxRootGuardGroup This group is mandatory for implementations
of the RootGuard capability.
optional stpxRootInconsistencyNotificationsGroup The notifications which a STP extension
implementation required to implement.
optional stpx4kVlanGroup This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095.
optional stpxSpanningTreeGroup This group must be implemented by the entities
that support MISTP and PVSTP+
optional stpxMISTPGroup This group must be implemented by the entities
that support MISTP.
optional stpxLongPathCostModeGroup This group must be implemented by the entities
that support 32 bits spannning tree path cost
value.
optional stpxPVSTVlanGroup This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration.
optional stpxMISTPGroup2 This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095.
optional stpxLoopInconsistencyNotificationsGroup The notifications which a STP extension
implementation is required to implement.
optional stpxBpduSkewingGroup This is an optional group for implementations of
Spanning Tree BPDU Skewing feature.
optional stpxFastStartGroup2 This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature.
optional stpxLoopGuardGroup2 This group is optional for implementations
of the LoopGuard capability.
optional stpxFastStartGroup3 This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature.
optional stpxUplinkGroup2 This group is optional for implementations
of UplinkFast feature.
optional stpxBackboneGroup2 This group is optional for implementations
of BackboneFast feature.
optional stpxRSTPGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRSTPTransmitHoldCountGroup This group is optional for implementation of
Rapid Spanning Tree Protocol feature.
optional stpxRPVSTGroup This group is optional for implementation of
Rapid PVST+ feature.
optional stpxExtendedSysIDGroup This group is mandatory for implementation of
Extended System ID feature.
optional stpxNotificationEnableGroup This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications.
optional stpxFastStartOperModeGroup This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature.
optional stpxMSTGroup4 This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device.
optional stpxSMSTGroup This group is mandatory for implementation of
supporting IEEE MST on the device.
optional stpxSMSTMaxHopCountGroup This group is mandatory for implementation of
maximum hop count configuration on the device.
optional stpxSMSTInstanceGroup This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device.
optional stpxSMSTInstanceEditGroup This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device.
optional stpxSMSTPortStatusGroup This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device.
optional stpxSMSTPortHelloTimeGroup This group is mandatory for implementation of
port hello time information for IEEE MST
on the device.
optional stpxSMSTInstanceCISTGroup This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device.
optional stpxPathCostOperModeGroup This group is mandatory for implementation of
supporting operational spanning tree path cost
mode.
optional stpxSMSTPortMSTModeGroup This group is mandatory for implementation of
supporting port MST mode configuration.
optional stpxSMSTConfigDigestGroup This group is optional for implementation of
supporting IEEE MST on the device.
optional stpxL2GatewayDomainIdGroup This group is mandatory for implementation of
layer2 gateway domain identifier.
Notifications / Traps (4)
NameOIDDescription
.1.3.6.1.4.1.9.9.82.2.0.1
A stpxInconsistencyUpdate notification is sent by a
bridge when an instance of stpxInconsistentState is
created or destroyed. That is, when an inconsistency is
discovered in the VLAN's Spanning Tree for a particular
port, or when such an inconsistency disappears. Note
that the trap is not sent if the port transitions between
different types of inconsistency.

The stpxInconsistentState value indicates the type of
inconsistency which now exists/no longer exists for the
relevant VLAN on the relevant port.
.1.3.6.1.4.1.9.9.82.2.0.2
A stpxRootInconsistencyUpdate notification is sent by a
bridge when an instance of stpxRootInconsistencyState
is created or destroyed. That is, when an
root-inconsistency is discovered in the VLAN's or
instance's Spanning Tree for a particular port, or when
such an root-inconsistency disappears. For creation, the
value of stpxRootInconsistencyState in the notification is
true(1); for deletion, the value is false(2).

The object value of stpxSpanningTreeType indicates
which Spanning Tree protocol is running when an instance
of stpxRootInconsistencyState is created or destroyed.
.1.3.6.1.4.1.9.9.82.2.0.3
A stpxLoopInconsistencyUpdate notification is sent by a
bridge when an instance of stpxLoopInconsistencyState
is created or destroyed. That is, when an
loop-inconsistency is discovered in the VLAN's or
instance's Spanning Tree for a particular port, or when
such an loop-inconsistency disappears. For creation,
the value of stpxLoopInconsistencyState in the
notification is true(1); for deletion, the value is
false(2).

The object value of stpxSpanningTreeType indicates
which Spanning Tree protocol is running when an instance
of stpxLoopInconsistencyState is created or
destroyed.
.1.3.6.1.4.1.9.9.82.2.0.4
A stpxMstInconsistencyUpdate notification is sent by a
bridge when an instance of stpxMstInconsistencyState
is created or destroyed. That is, when an
type-inconsistency is discovered in instance's Spanning
Tree for a particular port, or when such a type-inconsistency
disappears.

Note that the trap is not sent if the port transitions between
different types of inconsistency.

The stpxMstInconsistentState value indicates the type of
inconsistency which now exists/no longer exists for the
relevant instance on the relevant port.