CISCO-SERVICE-CONTROL-SUBSCRIBERS-MIB Table View

This table maintains list of subscribers of the service control
entity that has an entry in the entPhysicalTable of the
ENTITY-MIB.
          
An entry must be created in this table to monitor the subscriber
so that NMS application can query subscriber data from the
CISCO-SERVICE-CONTROL-DPI-MIB. 
If the service control entity is not required to monitor a
particular subscriber, the corresponding entry is deleted by
setting the cServiceControlSubscribersRowStatus object to
'destroy'.
          
When the service control entity reboots, the entries associated
with this entity will be cleared.

cServiceControlSubscribersEntry row .1.3.6.1.4.1.9.9.628.1.1.1

An entry (conceptual row) in the
cServiceControlSubscribersTable.

An entry is created to specify which subscriber
(cServiceControlSubscribersName) will be monitored by a service
control entity, identified b…

Indexes

ENTITY-MIBentPhysicalIndex cServiceControlSubscribersIndex

Column	Syntax	OID
cServiceControlSubscribersIndex A unique subscriber entry index.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.628.1.1.1.1
cServiceControlSubscribersName The name of the subscriber to be monitored by this service control entity.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.628.1.1.1.2
cServiceControlSubscriberStorageType This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): cServiceControlSubscribersName	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.628.1.1.1.3
cServiceControlSubscribersRowStatus The status of this conceptual row: To create a row in this table, a manager must set this object to either 'createAndGo' or 'createAndWait'. Until instances of all corresponding columns are appropriately configure…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.628.1.1.1.4

This table provides listing of subscribers data for a service
control entity that has an entry in the entPhysicalTable of the
ENTITY-MIB.
          
A subscriber of a service on the network is uniquely identified
by the cServiceControlSubscribersName. The subscriber may
either
be mapped to a network address known by the service control
entity, or may be anonymous. This table maintains statistical
data for subscribers known by the service control entity.

cServiceControlSubscribersInfoEntry row .1.3.6.1.4.1.9.9.628.1.2.1

An entry (conceptual row) in the
cServiceControlSubscribersInfoTable. This
entry lists information about the data regarding subscribers
management operations performed, and the current status of the
subscribers database…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cServiceControlSubscribersNumIntroduced This object indicates the current number of subscribers that have been introduced to the system. These subscribers may or may not have IP address or VLAN mappings.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.1
cServiceControlSubscribersNumFree This object indicates the free subscriber space available in the system. This is the number of subscribers that can be introduced to the system in addition to the subscribers that are already introduced to the system as…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.2
cServiceControlSubscribersNumIpAddrMappings This object indicates the current number of subscriber mappings to a single network address or to different network addresses. Each address mapped to a subscriber constitutes a subscriber mapping.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.3
cServiceControlSubscribersNumIpAddrMappingsFree This object indicates the number of free 'IP address to subscriber' mappings that may be used for defining new mappings.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.4
cServiceControlSubscribersNumIpRangeMappings This object indicates the current number of 'IP-range to subscriber' mappings. Each mapping instance corresponds to a subscriber mapped to a range of IP addresses.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.5
cServiceControlSubscribersNumIpRangeMappingsFree This object indicates the number of free 'IP-range to subscriber' mappings that may be used for defining new mappings.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.6
cServiceControlSubscribersNumVlanMappings This object indicates the current number of subscriber mappings to a single VLAN ID or to different VLAN IDs. Each VLAN ID mapped to a subscriber constitutes a subscriber mapping.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.7
cServiceControlSubscribersNumVlanMappingsFree This object indicates the number of free 'VLAN to subscriber' mappings that may be used for defining new mappings.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.8
cServiceControlSubscribersNumActive This object indicates the current number of active subscribers. These subscribers necessarily have an IP address or VLAN mappings that define the traffic that should be associated and served according to the subscriber …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.9
cServiceControlSubscribersNumUpdates This object indicates the accumulated number of subscribers database updates received by the system.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.10
cServiceControlSubscribersNumTpIpRanges This object indicates the current number of 'Traffic Processor IP address ranges' used. This object is equal to the total number of network address ranges used to map to all the subscribers in the system. For multiple t…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.11
cServiceControlSubscribersNumTpIpRangesFree This object indicates the number of free 'Traffic Processor IP ranges'.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.12
cServiceControlSubscribersNumAnonymous This object indicates the current number of anonymous subscribers.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.13
cServiceControlSubscribersNumWithSessions This object indicates the current number of subscribers with open flows.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.14
cServiceControlSubscriberMappingFailedReason This contains user readable description of the problem when some external entity attempts to create illegal or inconsistent subscriber mappings. For example, an attempt to map a subscriber to incorrect address will culm…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.628.1.2.1.15
cServiceControlSubsribersMaxSupported This object indicates the max number of subscribers that can be monitored by this service control entity.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.628.1.2.1.16