CISCO-RHINO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ciscoLS1010ModuleTable

table

.1.3.6.1.4.1.9.5.11.1.2.1 · 1 row entry · 11 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk ciscoLS1010ModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::ciscoLS1010ModuleTable'

A list of module entries.  The number of entries is 
given by the value of ciscoLS1010ChassisNumSlots.

ciscoLS1010ModuleEntry row .1.3.6.1.4.1.9.5.11.1.2.1.1

Entry containing information about one module in a
slot of the chassis.

Indexes

ciscoLS1010ModuleIndex

Column Syntax OID

ciscoLS1010ModuleIndex

A unique value for each module.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.9.5.11.1.2.1.1.1

ciscoLS1010ModuleType

The type of module.

Enumeration

Enumerated Values:

1	other
2	carrier
3	cpuSwitchAndFeature
4	cpuSwitchAndFeaturePFQ
5	superCarrier
6	cpuRoute
7	switch10GAndFC
8	switch10GNoFC
9	atmFabricIntegration
10	dualSlot
11	cmpmCarrier
12	tsCarrier
13	nodeSwitchProcessor2ndGeneration

.1.3.6.1.4.1.9.5.11.1.2.1.1.2

ciscoLS1010ModuleSerialNumberdeprecated

The serial number of the module.
Deprecated in favor of object
ciscoLS1010ModuleSerialNumberString. This object
returns 0 for modules using an alphanumeric
numbering scheme.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.2.1.1.3

ciscoLS1010ModuleHwVersion

The hardware version of the module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.2.1.1.4

ciscoLS1010ModuleSwVersion

The software version number.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.2.1.1.5

ciscoLS1010ModuleDescr

A descriptive string used by the agent
to describe the module.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.9.5.11.1.2.1.1.6

ciscoLS1010ModuleNumSubModules

The max number of sub-modules supported by this module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.11.1.2.1.1.7

ciscoLS1010ModuleAdminStatus

This object, when read, always returns a value of
ok(1). Setting this object to one of the
acceptable values gives the following results:
reset: reset the module's control logic
enable: enable the module
…

AdminStatusr/w

Type Values:

1	enable
2	disable
3	reset

.1.3.6.1.4.1.9.5.11.1.2.1.1.8

ciscoLS1010ModuleOperStatus

Operational status of the module.

OperStatus

Type Values:

1	unknown
2	ok
3	fault
4	fanAlarm
5	partialFault
6	empty

.1.3.6.1.4.1.9.5.11.1.2.1.1.9

ciscoLS1010ModuleHwVersionMinor

The minor hardware version of the module.

CISCO-TCUnsigned32

.1.3.6.1.4.1.9.5.11.1.2.1.1.10

ciscoLS1010ModuleSerialNumberString

The serial number of the module.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.9.5.11.1.2.1.1.11

ciscoLS1010SubModuleTable

table

.1.3.6.1.4.1.9.5.11.1.3.1 · 1 row entry · 11 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk ciscoLS1010SubModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::ciscoLS1010SubModuleTable'

A list of sub-module entries.  The number of entries is 
given by the value of ciscoLS1010SlotNumSubModules.

ciscoLS1010SubModuleEntry row .1.3.6.1.4.1.9.5.11.1.3.1.1

Entry containing information about one sub-module in a
sub-slot of the module.

Indexes

ciscoLS1010ModuleIndex ciscoLS1010SubModuleIndex

Column Syntax OID

ciscoLS1010SubModuleIndex

A unique value for each sub-module within the module.
This value is determined by sub-slot number where the
sub-module is inserted.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.9.5.11.1.3.1.1.1

ciscoLS1010SubModuleType

The type of sub-module.

Enumeration

Enumerated Values:

1	other
2	oc3Utp5
3	oc3SingleModeFiber
4	oc3MultiModeFiber
5	oc12SingleModeFiber
6	oc12MultiModeFiber
7	ds3
8	e3
9	cpuSwitch
10	featureFpga
11	featureAsic
12	t1
13	e1
14	e1bnc
15	oc3Mixed
16	cbrt1
17	cbr120e1
18	cbr75e1
19	quadDs3
20	quadE3
21	dualDs3
22	dualE3
23	oc12Mixed
24	atm25
25	featurePVC
26	routerProcessorAlpha
27	dualOC3SingleModeIRFiber
28	dualOC3MultiModeIRFiber
29	routerProcessorBeta
30	fratm1CT3
31	fratm4CE1
35	oc3SingleModeLRFiber
36	oc12SingleModeLRFiber
37	sixPortDS3
40	feUTP8p16k
41	feUTP8p64k
42	feMMF8p16k
43	feMMF8p64k
44	feUTP16p16k
45	feUTP16p64k
46	feMMF16p16k
47	feMMF16p64k
48	geF1p16k
49	geF1p64k
50	geF2p16k
51	geF2p64k
52	feBridge4p
53	feUTP8p16kFullDup
54	feUTP8p64kFullDup
55	routeProc
56	switch10GProc
57	featureNetClock
58	featureABR
59	geF8p64k
60	featureLite
61	s16pOC3MM
62	s16pOC3SM
63	s4pOC12MM
64	s4pOC12SM
65	atmIma8pT1
66	atmIma8pE1
67	atm25m4p
68	s1pOC48cSM
69	s1pOC48cSMLR
70	atmFIMBridge
71	atmFIMoc12MM
80	arm1p64k
81	arm2p64k
82	xpif1pGE16k
83	xpif1pGE64k
84	xpif1pGE256k
85	xpifAtm1pOC12SMIR64k
86	xpifAtm1pOC12SMIR256k
87	xpifAtm1pOC12MM64k
88	xpifAtm1pOC12MM256k
89	xpifAtm1pOC3SMIR64k
90	xpifAtm1pOC3SMIR256k
91	xpifAtm1pOC3MM64k
92	xpifAtm1pOC3MM256k
93	xpifPos1pOC12SMIR64k
94	xpifPos1pOC12SMIR256k
95	xpifPos1pOC12SMLR64k
96	xpifPos1pOC12SMLR256k
97	xpifArm2p256k
98	aclDaughter

.1.3.6.1.4.1.9.5.11.1.3.1.1.2

ciscoLS1010SubModuleSerialNumberdeprecated

The serial number of the sub-module.
Deprecated in favor of object
ciscoLS1010SubModuleSerialNumberString. This
object returns 0 for submodules using
an alphanumeric numbering scheme.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.3.1.1.3

ciscoLS1010SubModuleHwVersion

The major hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersionMinor,
this completely specifies the hardware version of
the sub-module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.3.1.1.4

ciscoLS1010SubModuleSwVersion

The software version number.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.3.1.1.5

ciscoLS1010SubModuleDescr

A descriptive string used by the agent
to describe the module.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.9.5.11.1.3.1.1.6

ciscoLS1010SubModuleNumPorts

The maximum number of ports supported by
this sub-module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.11.1.3.1.1.7

ciscoLS1010SubModuleAdminStatus

This object can be read/written as reset or ok.

Enumerationr/w

Enumerated Values:

1	reset
2	ok

.1.3.6.1.4.1.9.5.11.1.3.1.1.8

ciscoLS1010SubModuleHwVersionMinor

The minor hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersion,
this completely specifies the hardware version of
the sub-module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.5.11.1.3.1.1.9

ciscoLS1010SubModuleOperStatus

Operational status of the submodule.

OperStatus

Type Values:

1	unknown
2	ok
3	fault
4	fanAlarm
5	partialFault
6	empty

.1.3.6.1.4.1.9.5.11.1.3.1.1.10

ciscoLS1010SubModuleSerialNumberString

The serial number of the sub-module.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.9.5.11.1.3.1.1.11

ciscoLS1010PortTable

table

.1.3.6.1.4.1.9.5.11.1.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk ciscoLS1010PortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::ciscoLS1010PortTable'

A list of port entries.  The number of entries is 
determined by the number of modules in the chassis,
the number of sub-module in the module 
and the number of ports on each sub-module.

ciscoLS1010PortEntry row .1.3.6.1.4.1.9.5.11.1.4.1.1

Entry containing information for a particular port on
a sub-module.

Indexes

ciscoLS1010ModuleIndex ciscoLS1010SubModuleIndex ciscoLS1010PortIndex

Column	Syntax	OID
ciscoLS1010PortIndex An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.9.5.11.1.4.1.1.1`
ciscoLS1010PortIfIndex The ifIndex value assigned to this port.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.9.5.11.1.4.1.1.2`

ciscoAtmSwitchInvalidCellHeaderTable

table

.1.3.6.1.4.1.9.5.11.1.5.6 · 1 row entry · 2 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk ciscoAtmSwitchInvalidCellHeaderTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::ciscoAtmSwitchInvalidCellHeaderTable'

A list of invalid cell header entries.

ciscoAtmSwitchInvalidCellHeaderEntry row .1.3.6.1.4.1.9.5.11.1.5.6.1

a entry of invalid cell header.

Indexes

ciscoAtmSwitchInvalidCellHeaderIndex

Column	Syntax	OID
ciscoAtmSwitchInvalidCellHeaderIndex A sequence number that identifies a invalid cell header entry in the table.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.9.5.11.1.5.6.1.1`
ciscoAtmSwitchInvalidCellHeader The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VC…	OctetString Constraints: `range: 5-5`	`.1.3.6.1.4.1.9.5.11.1.5.6.1.2`

clsEnetPortTable

table

.1.3.6.1.4.1.9.5.11.1.6.1 · 1 row entry · 4 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk clsEnetPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::clsEnetPortTable'

A list of ethernet port entries.  This table
is mainly to support ethernet port only.

clsEnetPortEntry row .1.3.6.1.4.1.9.5.11.1.6.1.1

Entry contains information of a particular
ethernet port.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

clsEnetPortDuplex

Indicates whether the port is operating
in half-duplex, full-duplex, or auto mode.
If the port could not agree with the far end on
port duplex, the port will be in auto(2) mode.
Unknown(1) indicates either the port d…

Enumerationr/w

Enumerated Values:

1	unknown
2	auto
3	half
4	full

.1.3.6.1.4.1.9.5.11.1.6.1.1.1

clsEnetPortAdminSpeed

Indicates the desired speed of the port
in bits per second.
The current operational speed of the port
is determined by ifSpeed.
If the port could not agree with the far end on
port speed, the port will be in auto(2)…

Enumerationr/w

Enumerated Values:

1	unknown
2	auto
3	e10Mbps
4	e100Mbps
5	e1000Mbps

.1.3.6.1.4.1.9.5.11.1.6.1.1.2

clsEnetPortType

The type of physical layer medium-dependent
interface on the port.
unknown(1) indicates that the port type is none of
those defined. empty(6) indicates that the port is
not present.

Enumeration

Enumerated Values:

1	unknown
2	e100BaseTX
3	e100BaseFX
4	e1000BaseLX
5	e1000BaseSX
6	empty

.1.3.6.1.4.1.9.5.11.1.6.1.1.3

clsEnetPortLinkStatus

This object indicates how the link status
of the port came up.

autoNegotiate(2) -- the port will try to
negotiate the link with the partner port.
If successful, the link will come up,
otherwise the link w…

Enumerationr/w

Enumerated Values:

1	unknown
2	autoNegotiate
3	forceUp

.1.3.6.1.4.1.9.5.11.1.6.1.1.4

clsPortLedTable

table

.1.3.6.1.4.1.9.5.11.1.7.1 · 1 row entry · 3 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk clsPortLedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::clsPortLedTable'

A list of LED entries associated with a port.

clsPortLedEntry row .1.3.6.1.4.1.9.5.11.1.7.1.1

Entry contains information of a particular
LED associated with a particular port which
is identified by ifIndex.

Indexes

RFC1213-MIBifIndex clsPortLedIndex

Column Syntax OID

clsPortLedIndex

An index that uniquely identifies this LED
among all the LEDs associated with the port
identified by ifIndex.
This value is related to the physical location
of the LED, and is in ascending order from
top to bottom, lef…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.11.1.7.1.1.1

clsPortLedType

Indicates the type or label of the LED.

Enumeration

Enumerated Values:

1	ledTx
2	ledRx
3	ledLink
4	led100Mbps
5	ledRxLoss
6	ledRxFullOut
7	ledRxSync
8	ledFullDuplex
9	ledOptDetect

.1.3.6.1.4.1.9.5.11.1.7.1.1.2

clsPortLedStatus

Indicates the status of the LED.
Unknown(1) indicates either the LED status is
not supported or the status is none of the
defined.

Enumeration

Enumerated Values:

1	unknown
2	on
3	off

.1.3.6.1.4.1.9.5.11.1.7.1.1.3