CISCO-RHINO-MIB

        -Added enum sixPortDS3 for ciscoLS1010SubModuleType.
-Added enum nodeSwitchProcessor2ndGeneration for
 ciscoLS1010ModuleType. 
-Added enum ac175W for psType.
-Added Group object for Notification objects.
    
Source file
CISCO-RHINO-MIB
Last revised
Identity
ciscoLS1010ChassisMIB
Base OID
1.3.6.1.4.1.9.5.11
Imported Objects
CISCO-SMI workgroup
CISCO-TC Unsigned32
IF-MIB InterfaceIndex
RFC1213-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-RHINO-MIB::ciscoLS1010ChassisMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RHINO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RHINO-MIB::ciscoLS1010ChassisMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (92)
.1.3.6.1.4.1.9.5.11
.1.3.6.1.4.1.9.5.11.1
.1.3.6.1.4.1.9.5.11.1.1
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.1
.1.3.6.1.4.1.9.5.11.1.1.10
.1.3.6.1.4.1.9.5.11.1.1.11
.1.3.6.1.4.1.9.5.11.1.1.12
.1.3.6.1.4.1.9.5.11.1.1.13
.1.3.6.1.4.1.9.5.11.1.1.14
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.15
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.16
.1.3.6.1.4.1.9.5.11.1.1.17
.1.3.6.1.4.1.9.5.11.1.1.18
Integer32
.1.3.6.1.4.1.9.5.11.1.1.19
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.2
.1.3.6.1.4.1.9.5.11.1.1.20
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.21
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.22
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.23
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.24
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.25
Enumeration
.1.3.6.1.4.1.9.5.11.1.1.26
.1.3.6.1.4.1.9.5.11.1.1.3
.1.3.6.1.4.1.9.5.11.1.1.4
.1.3.6.1.4.1.9.5.11.1.1.5
.1.3.6.1.4.1.9.5.11.1.1.6
.1.3.6.1.4.1.9.5.11.1.1.7
.1.3.6.1.4.1.9.5.11.1.1.8
.1.3.6.1.4.1.9.5.11.1.1.9
.1.3.6.1.4.1.9.5.11.1.2
.1.3.6.1.4.1.9.5.11.1.2.1
.1.3.6.1.4.1.9.5.11.1.2.1.1
Integer32
.1.3.6.1.4.1.9.5.11.1.2.1.1.1
.1.3.6.1.4.1.9.5.11.1.2.1.1.10
.1.3.6.1.4.1.9.5.11.1.2.1.1.11
Enumeration
.1.3.6.1.4.1.9.5.11.1.2.1.1.2
.1.3.6.1.4.1.9.5.11.1.2.1.1.3
.1.3.6.1.4.1.9.5.11.1.2.1.1.4
.1.3.6.1.4.1.9.5.11.1.2.1.1.5
.1.3.6.1.4.1.9.5.11.1.2.1.1.6
Integer32
.1.3.6.1.4.1.9.5.11.1.2.1.1.7
.1.3.6.1.4.1.9.5.11.1.2.1.1.8
.1.3.6.1.4.1.9.5.11.1.2.1.1.9
.1.3.6.1.4.1.9.5.11.1.3
.1.3.6.1.4.1.9.5.11.1.3.1
.1.3.6.1.4.1.9.5.11.1.3.1.1
Integer32
.1.3.6.1.4.1.9.5.11.1.3.1.1.1
.1.3.6.1.4.1.9.5.11.1.3.1.1.10
.1.3.6.1.4.1.9.5.11.1.3.1.1.11
Enumeration
.1.3.6.1.4.1.9.5.11.1.3.1.1.2
.1.3.6.1.4.1.9.5.11.1.3.1.1.3
.1.3.6.1.4.1.9.5.11.1.3.1.1.4
.1.3.6.1.4.1.9.5.11.1.3.1.1.5
.1.3.6.1.4.1.9.5.11.1.3.1.1.6
Integer32
.1.3.6.1.4.1.9.5.11.1.3.1.1.7
Enumeration
.1.3.6.1.4.1.9.5.11.1.3.1.1.8
.1.3.6.1.4.1.9.5.11.1.3.1.1.9
.1.3.6.1.4.1.9.5.11.1.4
.1.3.6.1.4.1.9.5.11.1.4.1
.1.3.6.1.4.1.9.5.11.1.4.1.1
Integer32
.1.3.6.1.4.1.9.5.11.1.4.1.1.1
.1.3.6.1.4.1.9.5.11.1.4.1.1.2
.1.3.6.1.4.1.9.5.11.1.5
Enumeration
.1.3.6.1.4.1.9.5.11.1.5.1
.1.3.6.1.4.1.9.5.11.1.5.2
.1.3.6.1.4.1.9.5.11.1.5.3
.1.3.6.1.4.1.9.5.11.1.5.4
.1.3.6.1.4.1.9.5.11.1.5.5
.1.3.6.1.4.1.9.5.11.1.5.6
.1.3.6.1.4.1.9.5.11.1.5.6.1
Integer32
.1.3.6.1.4.1.9.5.11.1.5.6.1.1
OctetString
.1.3.6.1.4.1.9.5.11.1.5.6.1.2
.1.3.6.1.4.1.9.5.11.1.5.7
.1.3.6.1.4.1.9.5.11.1.5.8
.1.3.6.1.4.1.9.5.11.1.6
.1.3.6.1.4.1.9.5.11.1.6.1
.1.3.6.1.4.1.9.5.11.1.6.1.1
Enumeration
.1.3.6.1.4.1.9.5.11.1.6.1.1.1
Enumeration
.1.3.6.1.4.1.9.5.11.1.6.1.1.2
Enumeration
.1.3.6.1.4.1.9.5.11.1.6.1.1.3
Enumeration
.1.3.6.1.4.1.9.5.11.1.6.1.1.4
.1.3.6.1.4.1.9.5.11.1.7
.1.3.6.1.4.1.9.5.11.1.7.1
.1.3.6.1.4.1.9.5.11.1.7.1.1
Integer32
.1.3.6.1.4.1.9.5.11.1.7.1.1.1
Enumeration
.1.3.6.1.4.1.9.5.11.1.7.1.1.2
Enumeration
.1.3.6.1.4.1.9.5.11.1.7.1.1.3
.1.3.6.1.4.1.9.5.11.2
.1.3.6.1.4.1.9.5.11.2.0
.1.3.6.1.4.1.9.5.11.3
.1.3.6.1.4.1.9.5.11.3.1
.1.3.6.1.4.1.9.5.11.3.2
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-TCcisco
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. RFC-1212rfc
  10. RFC1155-SMIrfc
  11. RFC1213-MIBrfc
  12. CISCO-RHINO-MIBciscoselected
Type Definitions (5)
Enumeration
enable(1)
disable(2)
reset(3)
Led
Enumeration
off(1)
green(2)
red(3)
yellow(4)
blinkgreen(5)
blinkyellow(6)
blinkred(7)
unknown(8)
Enumeration
unknown(1)
ok(2)
fault(3)
fanAlarm(4)
partialFault(5)
empty(6)
Enumeration
unknown(1)
empty(2)
flash(3)
disk(4)
Enumeration
powerone(0)
astec(1)
minus48VDC(2)
empty(3)
ac1100W(4)
ac1200W(5)
dc1200W(6)
pem(7)
ac1360W(8)
dc1360W(9)
ac2000W(10)
dc2000W(11)
acpem(12)
ac175W(13)
Conformance Groups (12)
A collection of objects providing rhino chassis information
.1.3.6.1.4.1.9.5.11.3.2.1
A collection of objects providing rhino chassis information
which are obsolete.
.1.3.6.1.4.1.9.5.11.3.2.2
A collection of objects useful for reporting the hardware
version of sub-modules in the chassis.
.1.3.6.1.4.1.9.5.11.3.2.3
A collection of objects useful for managing clocking.
.1.3.6.1.4.1.9.5.11.3.2.4
A collection of objects for managing the LS1010 chassis.
.1.3.6.1.4.1.9.5.11.3.2.5
A collection of objects for managing ethernet ports.
.1.3.6.1.4.1.9.5.11.3.2.6
A collection of objects for showing port LEDs.
.1.3.6.1.4.1.9.5.11.3.2.7
A collection of objects for displaying operational status of
modules and sub-modules in the chassis.
.1.3.6.1.4.1.9.5.11.3.2.8
A collection of objects for reporting inlet temperature.
.1.3.6.1.4.1.9.5.11.3.2.9
A collection of objects for managing the
LS1010 chassis.
.1.3.6.1.4.1.9.5.11.3.2.10
A collection of objects providing rhino
chassis information which are obsolete.
.1.3.6.1.4.1.9.5.11.3.2.11
A collection of notifications supported
by LS1010 chassis.
.1.3.6.1.4.1.9.5.11.3.2.12
Compliance Statements (7)

OID .1.3.6.1.4.1.9.5.11.3.1.1
The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB. This statement was
obsoleted by ciscoLS1010ChassisMIBComplianceRev1.
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.2
The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB. This statement was
obsoleted by ciscoLS1010ChassisMIBComplianceRev2.
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.3
The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.4
The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB.
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.5
The compliance statement for entities which implement
the Cisco LS1010 Chassis MIB.
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.6
The compliance statement for the Cisco 6400 product.
Required groups

OID .1.3.6.1.4.1.9.5.11.3.1.7
The compliance statement for this MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
ciscoLS1010ModuleSerialNumberString Support for serial numbers longer than 32 characters
is not required.
ciscoLS1010SubModuleSerialNumberString Support for serial numbers longer than 32 characters
is not required.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.9.5.11.2.0.1
Agent detects a change in the status of ps0, ps1,
fan, 12V line, and/or chassis temperature.
This notification will be generated when the status
changes from no-fault to fault, and also when the status
changes from fault to no-fault.
.1.3.6.1.4.1.9.5.11.2.0.2
Agent detects any hot-swap component change or changes
in the chassis.