CISCO-PROP-ATM-IF-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
34
cpAtmIfConfigTable
table.1.3.6.1.4.1.9.9.319.1.1.1
·
1 row entry
·
1 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cpAtmIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROP-ATM-IF-MIB::cpAtmIfConfigTable'
This table is used to configure propAtm interfaces. Each entry in this table has a corresponding ifTable entry with ifType propAtm(197). The ifIndex value of that associated ifTable entry is used to index this this table. The entry of this table is added after its associated ifEntry is added in the ifTable of IF-MIB. It is impossible to add/delete entry to/from this table.
An entry in the cpAtmIfConfigTable table for
each propAtm port interface.
.
each propAtm port interface.
.
| Column | Syntax | OID |
|---|---|---|
|
The propATM interface's maximum cell rate.
|
cells-per-secondUnsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.9.9.319.1.1.1.1.1 |
cpAtmIfStatsEgressTable
table.1.3.6.1.4.1.9.9.319.1.2.1
·
1 row entry
·
12 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cpAtmIfStatsEgressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROP-ATM-IF-MIB::cpAtmIfStatsEgressTable'
This table reflects real-time statistics associated with
each of propAtm interfaces on the egress side.
Ingress terminology is used for the cells that are generated
by the voice gateway on the TDM side and are going toward
the ATM switch.
Egress terminology means the cells that are coming from the
ATM switch into the TDM side. This table contains
statistics from this egress point of view.
An entry in the cpAtmIfStatsEgressTable table for
each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
| Column | Syntax | OID |
|---|---|---|
|
The number of CLP-0 cells received from switch
at the traffic management and policing device. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.1 |
|
The number of CLP-1 cells received from switch
at the traffic management and policing device. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.2 |
|
The number of CLP-0 cells discarded due to policing.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.3 |
|
The number of CLP-1 cells discarded due to policing.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.4 |
|
The number of OAM cells received from the switch
at the traffic management and policing device. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.5 |
|
The number of EFCI cells received from the switch
at traffic management and policing device. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.6 |
|
The number of CLP-0 cells received from switch
at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvClp0Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.7 |
|
The number of CLP-1 cells received from switch
at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvClp1Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.8 |
|
The number of CLP-0 cells discarded due to policing.
This object is a 64-bit version of cpAtmIfEgrClp0DiscCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.9 |
|
The number of CLP-1 cells discarded due to policing.
This object is a 64-bit version of cpAtmIfEgrClp1DiscCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.10 |
|
The number of OAM cells received from the switch
at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvOAMCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.11 |
|
The number of EFCI cells received from the switch
at traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvEFCICells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.1.1.12 |
.1.3.6.1.4.1.9.9.319.1.2.2
·
1 row entry
·
13 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cpAtmIfEgressIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROP-ATM-IF-MIB::cpAtmIfEgressIntervalTable'
This table reflects interval(each 15 minute) statistics associated witheach of the propAtm interfaces on egress side.
An entry in the cpAtmIfEgressIntervalTable table
for each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
for each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
| Column | Syntax | OID |
|---|---|---|
|
Index of the table which represents the interval number.
An interval number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours an 45 minutes… |
Integer32 Constraints: range: 1-96 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.1 |
|
The number of CLP-0 cells received from switch
at the traffic management and policing device during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.2 |
|
The number of CLP-1 cells received from switch
at the traffic management and policing device during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.3 |
|
The number of CLP-0 cells discarded due to policing
during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.4 |
|
The number of CLP-1 cells discarded due to policing
during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.5 |
|
The number of OAM cells received from the switch
at the traffic management and policing device during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.6 |
|
The number of EFCI cells received from the switch
at traffic management and policing device during a 15 minute interval. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.7 |
|
The number of CLP-0 cells received from switch
at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvClp0Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.8 |
|
The number of CLP-1 cells received from switch
at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvClp1Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.9 |
|
The number of CLP-0 cells discarded due to policing
during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrClp0DiscCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.10 |
|
The number of CLP-1 cells discarded due to policing
during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrClp1DiscCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.11 |
|
The number of OAM cells received from the switch
at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvOAMCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.12 |
|
The number of EFCI cells received from the switch
at traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvEFCICells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.2.1.13 |
cpAtmIfStatsIngressTable
table.1.3.6.1.4.1.9.9.319.1.2.3
·
1 row entry
·
8 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cpAtmIfStatsIngressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROP-ATM-IF-MIB::cpAtmIfStatsIngressTable'
This table reflects real time statistics associated with
each of the the propAtm interfaces on the ingress side.
Ingress terminology is used for the cells that are generated
by the voice gateway on the TDM side and are going toward
the ATM switch.
Egress terminology means the cells that are coming from the
ATM switch into TDM side. This table contains statistics
from this ingress point of view.
An entry in the cpAtmIfStatsIngressTable table for
each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
each propAtm port interface.
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
| Column | Syntax | OID |
|---|---|---|
|
The number of CLP-0 cells transmitted to the switch
after traffic management and policing in ingress direction. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.1 |
|
The number of CLP-1 cells transmitted to the switch
after traffic management and policing in ingress direction. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.2 |
|
The number of EFCI cells transmitted to the switch
after traffic management and policing in ingress direction. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.3 |
|
The number of OAM loopback cells transmitted to switch
after traffic management and policing in ingress direction. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.4 |
|
The number of CLP-0 cells transmitted to the switch
after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtClp0Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.5 |
|
The number of CLP-1 cells transmitted to the switch
after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtClp1Cells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.6 |
|
The number of EFCI cells transmitted to the switch
after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtEFCICells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.7 |
|
The number of OAM loopback cells transmitted to switch
after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtOAMCells. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.9.9.319.1.2.3.1.8 |