CISCO-PROP-ATM-IF-MIB

        This MIB is designed for Propietary ATM (propAtm) 
interfaces.              
The propAtm interfaces are identified in the ifTable 
entries with ifType 197 (as defined in IANAifType-MIB).
This interface is a switch virtual interface which does 
not have any physical connector(jack).
    
Source file
CISCO-PROP-ATM-IF-MIB
Last revised
Identity
ciscoPropAtmIfMIB
Base OID
1.3.6.1.4.1.9.9.319
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PROP-ATM-IF-MIB::ciscoPropAtmIfMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PROP-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PROP-ATM-IF-MIB::ciscoPropAtmIfMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (50)
.1.3.6.1.4.1.9.9.319
.1.3.6.1.4.1.9.9.319.0
.1.3.6.1.4.1.9.9.319.1
.1.3.6.1.4.1.9.9.319.1.1
.1.3.6.1.4.1.9.9.319.1.1.1
.1.3.6.1.4.1.9.9.319.1.1.1.1
cells-per-secondUnsigned32
.1.3.6.1.4.1.9.9.319.1.1.1.1.1
.1.3.6.1.4.1.9.9.319.1.2
.1.3.6.1.4.1.9.9.319.1.2.1
.1.3.6.1.4.1.9.9.319.1.2.1.1
.1.3.6.1.4.1.9.9.319.1.2.1.1.1
.1.3.6.1.4.1.9.9.319.1.2.1.1.10
.1.3.6.1.4.1.9.9.319.1.2.1.1.11
.1.3.6.1.4.1.9.9.319.1.2.1.1.12
.1.3.6.1.4.1.9.9.319.1.2.1.1.2
.1.3.6.1.4.1.9.9.319.1.2.1.1.3
.1.3.6.1.4.1.9.9.319.1.2.1.1.4
.1.3.6.1.4.1.9.9.319.1.2.1.1.5
.1.3.6.1.4.1.9.9.319.1.2.1.1.6
.1.3.6.1.4.1.9.9.319.1.2.1.1.7
.1.3.6.1.4.1.9.9.319.1.2.1.1.8
.1.3.6.1.4.1.9.9.319.1.2.1.1.9
.1.3.6.1.4.1.9.9.319.1.2.2
.1.3.6.1.4.1.9.9.319.1.2.2.1
Integer32
.1.3.6.1.4.1.9.9.319.1.2.2.1.1
.1.3.6.1.4.1.9.9.319.1.2.2.1.10
.1.3.6.1.4.1.9.9.319.1.2.2.1.11
.1.3.6.1.4.1.9.9.319.1.2.2.1.12
.1.3.6.1.4.1.9.9.319.1.2.2.1.13
.1.3.6.1.4.1.9.9.319.1.2.2.1.2
.1.3.6.1.4.1.9.9.319.1.2.2.1.3
.1.3.6.1.4.1.9.9.319.1.2.2.1.4
.1.3.6.1.4.1.9.9.319.1.2.2.1.5
.1.3.6.1.4.1.9.9.319.1.2.2.1.6
.1.3.6.1.4.1.9.9.319.1.2.2.1.7
.1.3.6.1.4.1.9.9.319.1.2.2.1.8
.1.3.6.1.4.1.9.9.319.1.2.2.1.9
.1.3.6.1.4.1.9.9.319.1.2.3
.1.3.6.1.4.1.9.9.319.1.2.3.1
.1.3.6.1.4.1.9.9.319.1.2.3.1.1
.1.3.6.1.4.1.9.9.319.1.2.3.1.2
.1.3.6.1.4.1.9.9.319.1.2.3.1.3
.1.3.6.1.4.1.9.9.319.1.2.3.1.4
.1.3.6.1.4.1.9.9.319.1.2.3.1.5
.1.3.6.1.4.1.9.9.319.1.2.3.1.6
.1.3.6.1.4.1.9.9.319.1.2.3.1.7
.1.3.6.1.4.1.9.9.319.1.2.3.1.8
.1.3.6.1.4.1.9.9.319.2
.1.3.6.1.4.1.9.9.319.2.1
.1.3.6.1.4.1.9.9.319.2.2
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-PROP-ATM-IF-MIBciscoselected
Conformance Groups (7)
These are objects related to configuration of propAtm
Interface.
.1.3.6.1.4.1.9.9.319.2.2.1
These are objects related to Egress Statistics of propAtm
interfaces.
.1.3.6.1.4.1.9.9.319.2.2.2
These are objects related to Egress Interval Statistics of
propAtm Interfaces.
.1.3.6.1.4.1.9.9.319.2.2.3
These are objects related to Ingress Statistics of propAtm
interfaces.
.1.3.6.1.4.1.9.9.319.2.2.4
These are objects related to Egress Statistics of propAtm
interfaces.
This group is a 64-bit version of cpAtmIfEgressStatMIBGroup.
.1.3.6.1.4.1.9.9.319.2.2.5
These are objects related to Egress Interval Statistics of
propAtm Interfaces.
This group is a 64-bit version of
cpAtmIfEgressIntervalMIBGroup.
.1.3.6.1.4.1.9.9.319.2.2.6
These are objects related to Ingress Statistics of propAtm
interfaces.
This group is a 64-bit version of cpAtmIfIngressStatMIBGroup.
.1.3.6.1.4.1.9.9.319.2.2.7
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.319.2.1.1
The compliance statement for the SNMP entities which implement
ciscoPropAtmIfMIB.
Required groups
mandatory cpAtmIfConfigGroup
optional cpAtmIfEgressStatMIBGroup This group is for the counters with a 32-bit version.
optional cpAtmIfEgressIntervalMIBGroup This group is for the counters with a 32-bit version.
optional cpAtmIfIngressStatMIBGroup This group is for the counters with a 32-bit version.
optional cpAtmIfHCEgressStatMIBGroup This group is for the counters with a 64-bit version.
optional cpAtmIfHCEgressIntervalMIBGroup This group is for the counters with a 64-bit version.
optional cpAtmIfHCIngressStatMIBGroup This group is for the counters with a 64-bit version.