CISCO-PPPOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

cPppoeVcCfgTable

table
.1.3.6.1.4.1.9.9.194.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cPppoeVcCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PPPOE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PPPOE-MIB::cPppoeVcCfgTable' 
The table contains the PPPoE protocol related 
configuration for the VCLs(ATM Interface 
Virtual Channel Link).
cPppoeVcCfgEntry row .1.3.6.1.4.1.9.9.194.1.2.1.1
An entry containing additional PPPoE protocol
configuration related management information
applicable to a particular VCL.
Indexes
No indexes recorded
Column Syntax OID
cPppoeVcEnable
This object specifies whether the PPPoE protocol
should be enabled for this VCL. If the value of
this object is `false`, PPPoE protocol is
disabled; otherwise the PPPoE protocol is
enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.194.1.2.1.1.1

cPppoeVcSessionsTable

table
.1.3.6.1.4.1.9.9.194.1.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cPppoeVcSessionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PPPOE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PPPOE-MIB::cPppoeVcSessionsTable' 
Table of configuration and statistics about the 
number of PPPoE sessions on a list of VCLs(ATM 
Interface Virtual Channel Link).
cPppoeVcSessionsEntry row .1.3.6.1.4.1.9.9.194.1.3.1.1
An entry in the table containing PPPoE session
related information on a VCL. The entry of this
table is created when the value of cPppoeVcEnable
object is set to `true` for the entry associated
VCL. The entry of this …
Indexes
Column Syntax OID
cPppoeVcCurrSessions
The current number of active PPPoE sessions on
the VCL.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.3.1.1.1
cPppoeVcHighWaterSessions
The high water mark of the established PPPoE
sessions on the VCL.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.3.1.1.2
cPppoeVcMaxAllowedSessions
The maximum number of allowed PPPoE sessions on
the VCL.
sessionsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.3.1.1.3
cPppoeVcThresholdSessions
The Threshold value of the established PPPoE
sessions on the VCL. Default value is equal to
cPppoeVcMaxAllowedSessions.
sessionsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.3.1.1.4
cPppoeVcExceededSessionErrors
The accumulated number of errors for
establishing PPPoE session in the VC
due to the cPppoeVcCurrSessions value
exceeds the cPppoeVcMaxAllowedSessions
value.
attemptsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.3.1.1.5

cPppoeSessionsPerInterfaceTable

table
.1.3.6.1.4.1.9.9.194.1.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cPppoeSessionsPerInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PPPOE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PPPOE-MIB::cPppoeSessionsPerInterfaceTable' 
A list of interfaces' PPPoE session information.
cPppoeSessionsPerInterfaceEntry row .1.3.6.1.4.1.9.9.194.1.4.1.1
An entry in the table containing PPPoE sessions
information such as count information of various
states like PPP Termination Aggregation(PTA),
Forwarded(FWDED), Transient (TRANS) and TOTAL count and
the configured l…
Indexes
Column Syntax OID
cPppoeTotalSessions
The total number of PPPoE sessions which includes PPP
Termination Aggregation(PTA), Forwarded(FWDED) and
Transient(TRANS) state on a physical interface.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.1
cPppoePtaSessions
Number of PPPoE sessions which are in PPP Termination
Aggregation(PTA) state on a particular physical
interface.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.2
cPppoeFwdedSessions
Number of PPPoE sessions which are in Forwarded(FWDED)
state on a particular physical interface.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.3
cPppoeTransSessions
Number of PPPoE sessions which are in Transient(TRANS)
state on a particular physical interface.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.4
cPppoePerInterfaceSessionLossThreshold
This object is used to monitor number of active PPPoE
sessions, initiated from a particular physical interface.
The sssion count is accumulation of all the pppoe session
came on a physical and its sub-interfaces. If …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.5
cPppoePerInterfaceSessionLossPercent
This object is used to monitor the percentage of PPPoE
sessions loss on a particular physical interface
including all of its sub-interfaces. If during a
configured interval of time, percentage of PPPoE
sessions lost…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.194.1.4.1.1.6