CISCO-PORT-CHANNEL-MIB Table View

This table facilitates the creation and deletion of a
Port Channel interface to achieve higher bandwidths
than just one E_port. More than one E_port can be a 
member of an Port Channel port.
NOTE:Only E_ports can be members of an Port Channel
port.
          
A port is added to a Port Channel port by setting 
portChannelMemberList,and the 'manner' in which the 
agent performs the type of addition is determined 
by the value of portChannelAddType.
          
During the period when port(s) is being added to the
Port Channel, the agent will not allow to change any 
parameters of the port(s) being added. Also if the 
operation is successful (i.e. port(s) is added to the 
Port Channel) then also the agent will not allow to 
change any parameters of the individual port(s) that is
added. But any change done to the Port Channel port
will also be applied to the port(s) which are member(s)
of this Port channel port. Once a port(s) is removed
from a Port Channel Port it will retain the values that
it had when it was a member of the Port Channel port.
It will not have the old values it had before joining
the Port Channel port. 
          
The port(s) that are added/removed to/from a 
Port Channel port will be put into administratively
down (ifAdminStatus='down') which results into
operationally down(ifOperStatus='down'). To bring the 
port up again, the user has to set the port to be
administratively up(ifAdminStatus='up'). Then the port
goes through its initialization cycle to become 
active(ifOperStatus='up').

portChannelEntry row .1.3.6.1.4.1.9.9.285.1.1.1.1

There is one entry in this table for each created
Port Channel port.

Indexes

portChannelIndex

Column	Syntax	OID
portChannelIndex An index that uniquely identifies an entry in the portChannelTable table.	Unsigned32 Constraints: range: 1-2048	.1.3.6.1.4.1.9.9.285.1.1.1.1.1
portChannelIfIndex The ifIndex of this interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.285.1.1.1.1.2
portChannelAdminChannelMode The channel mode desired by the network manager. If this object is configured to be auto(1), then the 'portChannelOperChannelMode' will show the current operating channel mode of port.	PortChannelModer/w Type Values: 1 auto 2 on 3 off 4 desirable	.1.3.6.1.4.1.9.9.285.1.1.1.1.3
portChannelOperChannelMode The current operating channel mode of the port.	PortChannelMode Type Values: 1 auto 2 on 3 off 4 desirable	.1.3.6.1.4.1.9.9.285.1.1.1.1.4
portChannelAddType The method to be adopted by the agent to add port(s) to a Port Channel port. If normal(1), then a compatibility check is done on the parameters of the port(s) being added to this Port Channel. The port(s) being added mu…	Enumerationr/w Enumerated Values: 1 normal 2 force	.1.3.6.1.4.1.9.9.285.1.1.1.1.5
portChannelLastActionStatus The status of the last operation (add or remove a member) done to change the member list of a Port Channel Port. When no ports are added or the last operation is successful then this object will be successful(1). If th…	Enumeration Enumerated Values: 1 successful 2 failed	.1.3.6.1.4.1.9.9.285.1.1.1.1.6
portChannelLastActionStatusCause The cause of failure to last operation (add or remove a member) done to change the member list of a Port Channel port. This object will be zero length string if 'portChannelLastActionStatus' is successful(1).	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.285.1.1.1.1.7
portChannelLastActionTime The timestamp indicating the time of last action performed on this entry.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.285.1.1.1.1.8
portChannelMemberList The list of ifIndex's of the E_ports that are members of this Port Channel port.	CISCO-ST-TCPortMemberListr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.9.9.285.1.1.1.1.9
portChannelCreationTime The timestamp of this entry's creation time. Note that at this creation time, a discontinuity occurs in the statistic/error counters which are defined in CISCO-FC-FE-MIB, and which are associated with this Port Channel.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.285.1.1.1.1.10
portChannelRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.285.1.1.1.1.11
portChannelMemberOperStatus The list of port channel forwarding status of the E_ports that are members of this Port Channel port. Every four-byte is a status of the corresponding member port represented by ifIndex in portChannelMemberList. The p…	CISCO-ST-TCPortMemberList Type Constraints: range: 0..64	.1.3.6.1.4.1.9.9.285.1.1.1.1.12

This table facilitates Channel Group specific
interface configurations.

portChannelGrpIfExtEntry row .1.3.6.1.4.1.9.9.285.1.1.3.1

There is one entry in this table for each created
Port Channel port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
portChannelGrpIfAutoCreation This object indicates if this interface may be part of automatically created Channel Groups (and therefore Port Channels).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.285.1.1.3.1.1

This table extends the portChannelTable to support Port
Channel Protocol.

portChannelExtEntry row .1.3.6.1.4.1.9.9.285.1.1.4.1

There is one entry in this table for each created
Port Channel port. It contains an entry for every
Port Channel that is either automatically created or
manually configured.

Indexes

No indexes recorded

Column	Syntax	OID
portChannelExtChannelGrpMode The admin channel group mode of this port channel.	PortChannelGroupModer/w Type Values: 1 on 2 active	.1.3.6.1.4.1.9.9.285.1.1.4.1.1
portChannelExtAutoCreated Indicates of this port channel was automatically created. Note that this object is valid only for Fibre Channel port channels.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.285.1.1.4.1.2
portChannelExtPersistent This object converts an auto-created port channel to a persistent port channel when it is set to 'enable'. No action is taken if this object is set to 'noOp'. The value of the object when read is always '…	Enumerationr/w Enumerated Values: 1 noOp 2 enable	.1.3.6.1.4.1.9.9.285.1.1.4.1.3
portChannelExtOperChannelGrpMode The operational channel group mode of this port channel.	PortChannelGroupMode Type Values: 1 on 2 active	.1.3.6.1.4.1.9.9.285.1.1.4.1.4
portChannelExtFcipEnhanced This object will enable or disable the FCIP (Fibre Channel over Internet Protocol) enhanced capability for the port-channel.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.9.9.285.1.1.4.1.5