CISCO-PORT-CHANNEL-MIB

        The MIB module for management of Port Channel ports.
In addition to this MIB, CISCO-FC-FE-MIB and interface
mib (rfc2863) will also contain entries for Port Channel
ports.
    
Source file
CISCO-PORT-CHANNEL-MIB
Last revised
Identity
ciscoPortChannelMIB
Base OID
1.3.6.1.4.1.9.9.285
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-ST-TC PortMemberList
IF-MIB ifIndex InterfaceIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PORT-CHANNEL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PORT-CHANNEL-MIB::ciscoPortChannelMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PORT-CHANNEL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PORT-CHANNEL-MIB::ciscoPortChannelMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
.1.3.6.1.4.1.9.9.285
.1.3.6.1.4.1.9.9.285.1
.1.3.6.1.4.1.9.9.285.1.1
.1.3.6.1.4.1.9.9.285.1.1.1
.1.3.6.1.4.1.9.9.285.1.1.1.1
Unsigned32
.1.3.6.1.4.1.9.9.285.1.1.1.1.1
.1.3.6.1.4.1.9.9.285.1.1.1.1.10
.1.3.6.1.4.1.9.9.285.1.1.1.1.11
.1.3.6.1.4.1.9.9.285.1.1.1.1.12
.1.3.6.1.4.1.9.9.285.1.1.1.1.2
.1.3.6.1.4.1.9.9.285.1.1.1.1.3
.1.3.6.1.4.1.9.9.285.1.1.1.1.4
Enumeration
.1.3.6.1.4.1.9.9.285.1.1.1.1.5
Enumeration
.1.3.6.1.4.1.9.9.285.1.1.1.1.6
.1.3.6.1.4.1.9.9.285.1.1.1.1.7
.1.3.6.1.4.1.9.9.285.1.1.1.1.8
.1.3.6.1.4.1.9.9.285.1.1.1.1.9
.1.3.6.1.4.1.9.9.285.1.1.2
.1.3.6.1.4.1.9.9.285.1.1.3
.1.3.6.1.4.1.9.9.285.1.1.3.1
.1.3.6.1.4.1.9.9.285.1.1.3.1.1
.1.3.6.1.4.1.9.9.285.1.1.4
.1.3.6.1.4.1.9.9.285.1.1.4.1
.1.3.6.1.4.1.9.9.285.1.1.4.1.1
.1.3.6.1.4.1.9.9.285.1.1.4.1.2
Enumeration
.1.3.6.1.4.1.9.9.285.1.1.4.1.3
.1.3.6.1.4.1.9.9.285.1.1.4.1.4
Enumeration
.1.3.6.1.4.1.9.9.285.1.1.4.1.5
.1.3.6.1.4.1.9.9.285.1.2
.1.3.6.1.4.1.9.9.285.1.3
.1.3.6.1.4.1.9.9.285.1.3.0
.1.3.6.1.4.1.9.9.285.2
.1.3.6.1.4.1.9.9.285.2.1
.1.3.6.1.4.1.9.9.285.2.2
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (2)
Enumeration
on(1)
active(2)
Enumeration
auto(1)
on(2)
off(3)
desirable(4)
Conformance Groups (4)
A collection of objects related to Port Channel Interface
parameters.
.1.3.6.1.4.1.9.9.285.2.2.1
A collection of objects related to Port Channel Interface
parameters.
.1.3.6.1.4.1.9.9.285.2.2.2
A collection of objects related to Port Channel Protocol
mamagement.
.1.3.6.1.4.1.9.9.285.2.2.3
A collection of objects related to FCIP enhanced capability.
.1.3.6.1.4.1.9.9.285.2.2.4
Compliance Statements (5)

OID .1.3.6.1.4.1.9.9.285.2.1.1
The compliance statement for entities which
implement the CISCO-PORT-CHANNEL-MIB mib.
Required groups
Object refinements
ObjectAccessSyntaxDescription
portChannelRowStatus
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.

OID .1.3.6.1.4.1.9.9.285.2.1.2
The compliance statement for entities which
implement the CISCO-PORT-CHANNEL-MIB mib.
Required groups
Object refinements
ObjectAccessSyntaxDescription
portChannelRowStatus
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.
portChannelAdminChannelMode
It is compliant to support only a subset of
all the values defined.

OID .1.3.6.1.4.1.9.9.285.2.1.3
The compliance statement for entities which
implement the CISCO-PORT-CHANNEL-MIB mib.
Required groups
Object refinements
ObjectAccessSyntaxDescription
portChannelRowStatus
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.
portChannelAdminChannelMode
It is compliant to support only a subset of
all the values defined.

OID .1.3.6.1.4.1.9.9.285.2.1.4
The compliance statement for entities which
implement the CISCO-PORT-CHANNEL-MIB mib.
Required groups
mandatory portChannelGroup
mandatory portChannelGroupRev1
optional portChannelProtocolGroup Implementation of this group is mandatory for all
systems that support Port Channel Protocol.
Object refinements
ObjectAccessSyntaxDescription
portChannelRowStatus
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.
portChannelAdminChannelMode
It is compliant to support only a subset of
all the values defined.
portChannelProtocolEnable readonly
Only read-only need to supported.

OID .1.3.6.1.4.1.9.9.285.2.1.5
The compliance statement for entities which
implement the CISCO-PORT-CHANNEL-MIB mib.
Required groups
mandatory portChannelGroup
mandatory portChannelGroupRev1
optional portChannelProtocolGroup Implementation of this group is mandatory for all
systems that support Port Channel Protocol.
optional portChannelFcipGroup Implementation of this group is mandatory for all
devices that support FCIP enhanced capability.
Object refinements
ObjectAccessSyntaxDescription
portChannelRowStatus
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.
portChannelAdminChannelMode
It is compliant to support only a subset of
all the values defined.
portChannelProtocolEnable readonly
Only read-only need to supported.
portChannelExtFcipEnhanced readonly
Write access is not required.