CISCO-POP-MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
67
cpmDS0UsageTable
table.1.3.6.1.4.1.9.10.19.1.1.1
·
1 row entry
·
13 columns
The DS0 usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects include analog calls coming over ISDN, Channelized T1, and Channelized E1. This table is created for every DS1 line in the device.
An entry in the DS0 Usage table.
Indexes
cpmDS1SlotIndex cpmDS1PortIndex cpmChannelIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cpmDS1SlotIndex
The slot index indicates the slot number on the
device where the DS1 card resides. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.1 |
||||||||||||||||
|
cpmDS1PortIndex
The port index indicates the port number of a
specific DS1 on the DS1 card in the slot |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.2 |
||||||||||||||||
|
cpmChannelIndex
The channel index that distinguishes the DS0 timeslot
of the DS1 port. The range of the channel index is based on the number of T1/E1 channels: 1-24(T1) and 1-31(E1). |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.3 |
||||||||||||||||
|
cpmConfiguredType
The configured technology for the channel: ISDN(2),
Channelized T1 (3) or Channelized E1 (4). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.1.1.1.4 |
||||||||||||||||
|
cpmDS0CallType
The type of the current call carried by this DS0.
idle - This DS0 is currently idle. unknown - The data type of the call currently occupying this DS0 is not one of the types listed here. analo… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.1.1.1.5 |
||||||||||||||||
|
cpmL2Encapsulation
The data link encapsulation of the call currently
occuppying this DS0: idle - This DS0 is currently idle. unknown - The encapsulation of the currently active call on this DS0 is not one … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.1.1.1.6 |
||||||||||||||||
|
cpmCallCount
The number of calls that have occupied this DS0.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.7 |
||||||||||||||||
|
cpmTimeInUse
The amount of time that this DS0 has been in use.
This is computed by summing up the call durations of all past calls that have occupied this DS0. |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.8 |
||||||||||||||||
|
cpmInOctets
The total number of octets received on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the received 'raw' octets are counted, including any protocol hea… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.9 |
||||||||||||||||
|
cpmOutOctets
The total number of octets transmitted on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the transmitted 'raw' octets are counted, including any protoc… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.10 |
||||||||||||||||
|
cpmInPackets
The total number of packets received on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.11 |
||||||||||||||||
|
cpmOutPackets
The total number of packets transmitted on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.12 |
||||||||||||||||
|
cpmAssociatedInterface
This is the value of ifIndex when the specific channel
has an active call with a corresponding interface in the ifTable. For example, a digital ISDN call has a value pointing to the B-Channel entry in the ifTable. A … |
IF-MIBInterfaceIndexOrZero Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.1.1.13 |
cpmDS1DS0UsageTable
table.1.3.6.1.4.1.9.10.19.1.1.9
·
1 row entry
·
17 columns
The DS1-DS0-usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects provide information on timeslots usage for a particular DS1.
An entry in the DS0 Usage table.
Indexes
cpmDS1UsageSlotIndex cpmDS1UsagePortIndex
| Column | Syntax | OID |
|---|---|---|
|
cpmDS1UsageSlotIndex
The slot index indicates the slot number on the
device where the DS1 card resides. The slot index of the first slot is starting from 0 and increment by 1 for the next slot in the device. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.1 |
|
cpmDS1UsagePortIndex
The port index indicates the port number of a
specific DS1 on the DS1 card in the slot. The port index of the first port is starting from 0 and increment by 1 for the next port on the DS1 card. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.2 |
|
cpmDS1ActiveDS0s
The number of DS0s that are currently in use for a
particular DS1. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.3 |
|
cpmDS1ActiveDS0sHighWaterMark
The highest number of simultaneously actived DS0s on a
specified DS1. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.4 |
|
cpmDS1TotalAnalogCalls
The accumulated number of analog data calls
(cpmDS0CallType has the value 'analog(3)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls. |
callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.5 |
|
cpmDS1TotalDigitalCalls
The accumulated number of digital data calls
(cpmDS0CallType has the value 'digital(4)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls. |
callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.6 |
|
cpmDS1TotalV110Calls
The accumulated number of v.110 data calls
(cpmDS0CallType has the value 'v110(5)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls. |
callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.7 |
|
cpmDS1TotalV120Calls
The accumulated number of v.120 data calls
(cpmDS0CallType has the value 'v120(6)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls. |
callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.8 |
|
cpmDS1TotalCalls
The total number of calls on all the DS0s within
this DS1 since last system re-initialization. The object includes active and terminated calls. This only includes DS0s configured as bearer channels, not t… |
callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.9 |
|
cpmDS1TotalTimeInUse
The total call duration on all the DS0s within
this DS1 since last system re-initialization. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channe… |
secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.10 |
|
cpmDS1CurrentIdle
The total number of DS0s currently in idle state within
this DS1. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. S… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.11 |
|
cpmDS1CurrentOutOfService
The total number of DS0s in this DS1 currently placed
out of service. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. … |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.12 |
|
cpmDS1CurrentBusyout
The total number of DS0s in this DS1 which currently have
been requested to be busied out, but are not yet out of service. When an active call on a busied out DS0 terminates, the DS0 will be out of servic… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.13 |
|
cpmDS1InOctets
The total number of octets received over all the
DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInOctets objects in the cpmDS0UsageTable for thi… |
octetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.14 |
|
cpmDS1OutOctets
The total number of octets transmitted over all the
DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutOctets objects in the cpmDS0UsageTable for… |
octetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.15 |
|
cpmDS1InPackets
The total number of data packets received over all the
DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInPackets objects in the cpmDS0UsageTable … |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.16 |
|
cpmDS1OutPackets
The total number of data packets transmitted over all the
DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutPackets objects in the cpmDS0UsageTa… |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.1.9.1.17 |
.1.3.6.1.4.1.9.10.19.1.3.1
·
1 row entry
·
14 columns
The active call summary table is needed to track currently active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB, and the DIAL-CONTROL_MIB is not yet available.
An entry in the Call Summary table.
Indexes
cpmActiveCallStartTimeIndex cpmActiveCallSummaryIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cpmActiveCallStartTimeIndex
The start time of the current call.
|
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.1 |
||||||||||||
|
cpmActiveCallSummaryIndex
Arbitrary small integer to distinguish calls that occured
at the same time tick. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.2 |
||||||||||||
|
cpmActiveUserID
The User login ID or zero length string if unavailable.
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.3 |
||||||||||||
|
cpmActiveUserIpAddr
The IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.4 |
||||||||||||
|
cpmActiveCallType
The call type:
unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.3.1.1.5 |
||||||||||||
|
cpmActiveModemSlot
Identification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemPort uniquely identifies a modem. Value is -1 if call does not utiliz… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.6 |
||||||||||||
|
cpmActiveModemPort
Identification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemSlot uniquely identifies a modem. Value is -1 if call does not utiliz… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.7 |
||||||||||||
|
cpmActiveCallDuration
The duration of the current call.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.8 |
||||||||||||
|
cpmActiveEntrySlot
The logical slot in which the DS1 line that the user
connected on resides. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.9 |
||||||||||||
|
cpmActiveEntryPort
The logical port for the DS1 line that the user connected on.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.10 |
||||||||||||
|
cpmActiveEntryChannel
The channel within the DS1 that is allocated to the call.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.11 |
||||||||||||
|
cpmActiveRemotePhoneNumber
The remote telephone number. For a call into the device,
this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.12 |
||||||||||||
|
cpmActiveLocalPhoneNumber
The local telephone number. For a call into the device,
this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.13 |
||||||||||||
|
cpmActiveTTYNumber
The TTY number associated with this call. This
information comes from the IOS 'show line' command. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.3.1.1.14 |
.1.3.6.1.4.1.9.10.19.1.4.3
·
1 row entry
·
15 columns
The call history summary table is needed to track ended active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB; the CISCO-ISDN-MIB objects do not contain information about the active calls; and the DIAL-CONTROL_MIB is not yet available.
An entry in the Call Summary table.
Indexes
cpmCallDisconnectTimeIndex cpmCallStartTimeIndex cpmCallHistorySummaryIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cpmCallDisconnectTimeIndex
The disconnect time of the call.
|
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.1 |
||||||||||||
|
cpmCallStartTimeIndex
The start time of the current call.
|
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.2 |
||||||||||||
|
cpmCallHistorySummaryIndex
Arbitrary small integer to distinguish calls that occured
at the same time tick. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.3 |
||||||||||||
|
cpmUserID
The User login ID or zero length string if unavailable.
This object comes directly from IOS. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.4 |
||||||||||||
|
cpmUserIpAddr
The IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.5 |
||||||||||||
|
cpmCallType
The call type:
unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.4.3.1.6 |
||||||||||||
|
cpmModemSlot
Identification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemPort uniquely identifies a modem. Value is -1 if call does not utilize a mode… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.7 |
||||||||||||
|
cpmModemPort
Identification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemSlot uniquely identifies a modem. Value is -1 if call does not utilize a mode… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.8 |
||||||||||||
|
cpmCallDuration
The duration of the current call.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.9 |
||||||||||||
|
cpmEntrySlot
The physical system slot in which the DS1 line that the user
connected on resides. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.10 |
||||||||||||
|
cpmEntryPort
The logical port for the DS1 line that the user connected on.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.11 |
||||||||||||
|
cpmEntryChannel
The channel within the DS1 that is allocated to the call.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.12 |
||||||||||||
|
cpmRemotePhoneNumber
The remote telephone number. For a call into the device,
this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.13 |
||||||||||||
|
cpmLocalPhoneNumber
The local telephone number. For a call into the device,
this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.14 |
||||||||||||
|
cpmTTYNumber
The TTY number associated with this call. This
information comes from the IOS 'show line' command. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.19.1.4.3.1.15 |
cpmDS0StatusTable
table.1.3.6.1.4.1.9.10.19.1.5.2
·
1 row entry
·
8 columns
The DS0 Status Table provides additional DS0 level
information and configuration.
This table is an extension of the cpmDS0UsageTable.
Status for an individual DS0.
This entry AUGMENTS the cpmDS0UsageEntry.
An entry exists for each configured DS0 in the system.
This entry AUGMENTS the cpmDS0UsageEntry.
An entry exists for each configured DS0 in the system.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cpmDS0OperStatus
The operational state of the DSO.
This object provides more detailed information than the IF-MIB ifOperStatus. unknown - The DSO is in an unknown state down - The DS0 is out of service idle - This D… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.1 |
||||||||||||||
|
cpmDS0BusyoutAdminStatus
The administratively requested busyout state of the DSO.
This object represents the desired busyout state of the DS0, which may or may not be reflected in the operation state, cpmDS0OperStatus. This objec… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.2 |
||||||||||||||
|
cpmDS0BusyoutAllow
The object indicates if busyout requests for this DSO
will be allowed. true - Setting cpmDS0BusyoutAdminStatus to busyout(2) or busyoutImmediate(3) will be accepted false - B… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.3 |
||||||||||||||
|
cpmDS0BusyoutStatus
The busyout status of the DSO.
noBusyout - The DS0 is not busied out nor has a busyout pending. busyoutPending - The DS0 has a busyout request pending. It will shut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.4 |
||||||||||||||
|
cpmDS0BusyoutSource
The source of the busyout request either pending or
active for the DSO. none - The DS0 is not busied out nor has a busyout request pending local - The DS0 is busied out or has a… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.5 |
||||||||||||||
|
cpmDS0BusyoutTime
Value of sysUpTime when the most recent busyout request
was issued for this DS0. The value is zero indicates no busyout request has been issued. |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.9.10.19.1.5.2.1.6 |
||||||||||||||
|
cpmDS0ConfigFunction
The object indicates the function this DSO is configured
to provide. This object provides more detail than cpmConfiguredType. unknown - Unknown configuration t1SignallingChan… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.10.19.1.5.2.1.7 |
||||||||||||||
|
cpmDS0InterfaceIndex
This is the value of ifIndex in the ifTable for this DS0.
|
IF-MIBInterfaceIndexOrZero Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.10.19.1.5.2.1.8 |