The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified by IP addresses or other means. Members of a policy group will be subjected to the same policy. In this MIB, user can apply a policy to policy group(s) as well as configure and retrieve the group membership. |
ciscoMgmt | CISCO-SMI |
InetAddressType, InetAddress | INET-ADDRESS-MIB |
MODULE-COMPLIANCE, OBJECT-GROUP | SNMPv2-CONF |
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 | SNMPv2-SMI |
TEXTUAL-CONVENTION, RowStatus | SNMPv2-TC |
![]() | .1.3.6.1.4.1.9.9.507 | |
![]() | .1.3.6.1.4.1.9.9.507.0 | |
![]() | .1.3.6.1.4.1.9.9.507.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1.1.3 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.1.1.4 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.3 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.4 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.5 | |
![]() | .1.3.6.1.4.1.9.9.507.1.1.2.1.6 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.1.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.1.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.2.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.2.1.1 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.2.1.2 | |
![]() | .1.3.6.1.4.1.9.9.507.1.2.2.1.3 | |
![]() | .1.3.6.1.4.1.9.9.507.2 | |
![]() | .1.3.6.1.4.1.9.9.507.2.1 | |
![]() | .1.3.6.1.4.1.9.9.507.2.2 |