CISCO-MVPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
46

ciscoMvpnGenericTable

table
.1.3.6.1.4.1.9.10.113.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnGenericTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnGenericTable' 
This table gives the generic information about the MVRFs 
present in this device.
ciscoMvpnGenericEntry row .1.3.6.1.4.1.9.10.113.1.2.1.1
An entry in this table is created for every MVRF in the
device.
Note that many implementations may have MVRF for global
VRF (VRF0) by default in the device.
Also note that existence of the correspoding VRF in
L3VPN-…
Indexes
Column Syntax OID
ciscoMvpnGenOperStatusChange
This object describes the last operational change that
happened for the given MVRF.

createdMvrf - indicates that the MVRF was created in the
device.

deletedMvrf - indicates that the MVRF …
Enumeration
Enumerated Values:
1createdMvrf
2deletedMvrf
3modifiedMvrfDefMdtConfig
4modifiedMvrfDataMdtConfig
 .1.3.6.1.4.1.9.10.113.1.2.1.1.1
ciscoMvpnGenOperChangeTime
The time at which the last operational change for the
MVRF in question took place. The last operational change
is specified by ciscoMvpnGenOperStatusChange.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.113.1.2.1.1.2
ciscoMvpnGenAssociatedInterfaces
Total number of interfaces associated with this MVRF (including
the MDT tunnel interface) with ifOperStatus = up(1).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.113.1.2.1.1.3
ciscoMvpnGenRowStatus
This variable is used to create or delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.113.1.2.1.1.4

ciscoMvpnMdtDefaultTable

table
.1.3.6.1.4.1.9.10.113.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnMdtDefaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMdtDefaultTable' 
This table specifies the default MDT address and the 
encapsulation type used for a MVRF instance.
ciscoMvpnMdtDefaultEntry row .1.3.6.1.4.1.9.10.113.1.3.1.1
An entry in this table is created for every MVRF for which
a default MDT group is configured. A MVRF which does not
have a default MDT group configured will not appear in
this table.
Creation of a row in this table i…
Indexes
Column Syntax OID
ciscoMvpnMdtDefaultAddrType
The Internet address type of ciscoMvpnMdtDefaultAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.3.1.1.1
ciscoMvpnMdtDefaultAddress
The default MDT address to be used for the MVRF in question.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.3.1.1.2
ciscoMvpnMdtEncapsType
The encapsulation type to be used in the MVRF in question.
Enumerationr/w
Enumerated Values:
1greIp
2ipIp
3mpls
 .1.3.6.1.4.1.9.10.113.1.3.1.1.3
ciscoMvpnMdtDefaultRowStatus
This variable is used to create, modify or delete a
row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.113.1.3.1.1.4

ciscoMvpnMdtDataTable

table
.1.3.6.1.4.1.9.10.113.1.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnMdtDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMdtDataTable' 
This table specifies the range of data MDT addresses and 
associated variables for a MVRF instance.
ciscoMvpnMdtDataEntry row .1.3.6.1.4.1.9.10.113.1.3.2.1
An entry in this table is created for every MVRF for which
a data MDT group range is configured. A MVRF which does
not have a data MDT group range configured will not appear
in this table.
Creation of a row in this ta…
Indexes
Column Syntax OID
ciscoMvpnMdtDataRangeAddrType
The Internet address type of ciscoMvpnMdtDataRangeAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.3.2.1.1
ciscoMvpnMdtDataRangeAddress
The data MDT group range address for the given MVRF.
This along with ciscoMvpnMdtDataWildcardBits gives the
pool of data MDT addresses that can be used for
encapsulation in the MVRF upon data MDT switchover.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.3.2.1.2
ciscoMvpnMdtDataWildcardType
The Internet address type of ciscoMvpnMdtDataWildcardBits.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.3.2.1.3
ciscoMvpnMdtDataWildcardBits
Wildcard bits which when used along with data MDT range
address, give a pool of addresses to be used in a MVRF.

For example, if ciscoMvpnMdtDataRangeAddress is 239.1.2.0
and ciscoMvpnMdtDataWildcardBits…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.3.2.1.4
ciscoMvpnMdtDataThreshold
The bandwidth threshold value which when exceeded for a
multicast routing entry in the given MVRF, triggers usage
of data MDT address instead of default MDT address for
encapsulation.
kilobits per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.113.1.3.2.1.5
ciscoMvpnMdtDataRowStatus
This variable is used to create, modify or delete a
row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.10.113.1.3.2.1.6

ciscoMvpnMrouteMdtTable

table
.1.3.6.1.4.1.9.10.113.1.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnMrouteMdtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMrouteMdtTable' 
Given a multicast routing entry and the context MVRF, this 
table provides information about the MDT group being used for 
encapsulating the traffic for the multicast routing entry in 
the provider network at the instance of querying. Note that
this table is a read-only table and is the result of the 
default MDT and data MDT configurations and the operational 
conditions like the traffic rate and sometimes, the 
implementation choices.
ciscoMvpnMrouteMdtEntry row .1.3.6.1.4.1.9.10.113.1.4.1.1
An entry in this table exists for a multicast routing entry
the traffic for which is being encapsulated in a context
MVRF.
Indexes
Column Syntax OID
ciscoMvpnMrouteMvrfGrpAddrType
The Internet address type of ciscoMvpnMrouteMvrfGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.1.1.1
ciscoMvpnMrouteMvrfGroup
Group adddress of multicast routing entry in question.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.1.1.2
ciscoMvpnMrouteMvrfSrcAddrType
The Internet address type of ciscoMvpnMrouteMvrfSource.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.1.1.3
ciscoMvpnMrouteMvrfSource
Source adddress of the multicast routing entry in question.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.1.1.4
ciscoMvpnMrouteUpDownStreamInfo
Indicates if this PE is the upstream (sending) or the
downstream (receiving) router for the multicast routing entry
specified by ciscoMvpnMrouteMvrfSource and
ciscoMvpnMrouteMvrfGroup in the context MVRF specified by…
Enumeration
Enumerated Values:
1upstream
2downstream
 .1.3.6.1.4.1.9.10.113.1.4.1.1.5
ciscoMvpnMrouteMdtGrpAddrType
The Internet address type of ciscoMvpnMrouteMdtGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.1.1.6
ciscoMvpnMrouteMdtGroup
MDT group address used to encapsulate the multicast routing
entry specified by ciscoMvpnMrouteMvrfSource and
ciscoMvpnMrouteMvrfGroup in the context MVRF specified by
mplsVpnVrfName.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.4.1.1.7
ciscoMvpnMrouteMdtType
Indicates the type of MDT group used for encapsulation.
Enumeration
Enumerated Values:
1mdtDefault
2mdtData
 .1.3.6.1.4.1.9.10.113.1.4.1.1.8

ciscoMvpnBgpMdtUpdateTable

table
.1.3.6.1.4.1.9.10.113.1.4.2 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnBgpMdtUpdateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnBgpMdtUpdateTable' 
This table has information about the BGP advertisement of the 
the MDT groups. (These advertisements are generated 
and used for source discovery when SSM is used.)
ciscoMvpnBgpMdtUpdateEntry row .1.3.6.1.4.1.9.10.113.1.4.2.1
An entry in this table is created when a BGP advertisement of
the MDT group is received and cached in the PE device.
An entry in this table deleted when such a cached BGP MDT
update is withdrawn.
Indexes
Column Syntax OID
ciscoMvpnBgpMdtUpdGrpAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.2.1.1
ciscoMvpnBgpMdtUpdateGroup
MDT group address in the BGP MDT advertisement.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.2.1.2
ciscoMvpnBgpMdtUpdateRd
RD (route distinguisher) in the BGP MDT advertisement. This
is the RD corresponding to the originator PE.
MPLS-VPN-MIBMplsVpnRouteDistinguisher
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.9.10.113.1.4.2.1.3
ciscoMvpnBgpMdtUpdSrcAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateSource.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.2.1.4
ciscoMvpnBgpMdtUpdateSource
MDT source address in the BGP MDT advertisement.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.2.1.5
ciscoMvpnBgpMdtUpdOrigAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateOriginator.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.2.1.6
ciscoMvpnBgpMdtUpdateOriginator
The BGP peering address of the device that originated (or
advertized) the BGP MDT update.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.4.2.1.7
ciscoMvpnBgpMdtUpdNhAddrType
The Internet address type of ciscoMvpnBgpMdtUpdateNexthop.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.2.1.8
ciscoMvpnBgpMdtUpdateNexthop
The next-hop address (address of the border router to be
used to reach the destination network) in the BGP MDT
advertisement.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.4.2.1.9

ciscoMvpnMdtJnRcvTable

table
.1.3.6.1.4.1.9.10.113.1.4.3 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnMdtJnRcvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMdtJnRcvTable' 
This table has information about the data MDT join TLVs 
received by a device.
ciscoMvpnMdtJnRcvEntry row .1.3.6.1.4.1.9.10.113.1.4.3.1
An entry in this table is created or updated for every MDT
data join TLV received and cached in the device. The value of
mplsVpnVrfName in such an entry specifies the name of the
MVRF for which the data MDT groups fr…
Indexes
Column Syntax OID
ciscoMvpnMdtJnRcvGrpAddrType
The Internet address type of ciscoMvpnMdtJnRcvGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.3.1.1
ciscoMvpnMdtJnRcvGroup
Data MDT group address in the MDT join TLV.
OctetString
Constraints:
range: 4-4
range: 20-20
range: 16-16
 .1.3.6.1.4.1.9.10.113.1.4.3.1.2
ciscoMvpnMdtJnRcvSrcAddrType
The Internet address type of ciscoMvpnMdtJnRcvSource.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.3.1.3
ciscoMvpnMdtJnRcvSource
Source address for the MDT multicast routing entry created
following the receipt of MDT join TLV.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.3.1.4
ciscoMvpnMdtJnRcvUpTime
The time since this MDT join TLV was first received by the
device.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.9.10.113.1.4.3.1.5
ciscoMvpnMdtJnRcvExpTime
The amount of time remaining before the cache corresponding
to this MDT join TLV is deleted from the device and the
corresponding MDT multicast routing entry is marked as a
non-MDT entry.
Note that multiple TLVs for…
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.9.10.113.1.4.3.1.6

ciscoMvpnMdtJnSendTable

table
.1.3.6.1.4.1.9.10.113.1.4.4 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnMdtJnSendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMdtJnSendTable' 
This table specifies the data MDT Join TLVs sent by a 
device.
ciscoMvpnMdtJnSendEntry row .1.3.6.1.4.1.9.10.113.1.4.4.1
Entries in this table exist for data MDT Join TLVs that are
being sent by this device to other PEs.
Indexes
Column Syntax OID
ciscoMvpnMdtJnSendGrpAddrType
The Internet address type of ciscoMvpnMdtJnSendGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.4.1.1
ciscoMvpnMdtJnSendGroup
This indicates the address of a multicast group in the
MVRF specified by the column mplsVpnVrfName. This along
with ciscoMvpnMdtJnSendSource identifies the multicast
routing entry for which the MDT join TLV is sent.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.4.1.2
ciscoMvpnMdtJnSendSrcAddrType
The Internet address type of ciscoMvpnMdtJnSendSource.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.4.1.3
ciscoMvpnMdtJnSendSource
This indicates the address of a source in the MVRF
specified by the column mplsVpnVrfName. This, along with
ciscoMvpnMdtJnSendGroup identifies the multicast routing entry
for which the MDT join TLV is sent.
OctetString
Constraints:
range: 20-20
range: 16-16
range: 4-4
 .1.3.6.1.4.1.9.10.113.1.4.4.1.4
ciscoMvpnMdtJnSendMdtGrpAddrType
The Internet address type of ciscoMvpnMdtJnSendMdtGroup.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.113.1.4.4.1.5
ciscoMvpnMdtJnSendMdtGroup
The data MDT group in the MDT Join TLV sent.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.4.4.1.6
ciscoMvpnMdtJnSendMdtRefCt
Indicates how many multicast routing entries in the MVRF
specified by the column mplsVpnVrfName are using
ciscoMvpnMdtJnSendMdtGroup for encapsulation.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.113.1.4.4.1.7

ciscoMvpnTunnelTable

table
.1.3.6.1.4.1.9.10.113.1.4.5 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoMvpnTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnTunnelTable' 
This table gives information about the MVPN/MDT tunnels 
present in the device.
ciscoMvpnTunnelEntry row .1.3.6.1.4.1.9.10.113.1.4.5.1
An entry in this table is created for every MVPN tunnel
interface present in the device. The ifType for a MVPN
tunnel is 'tunnel' (131).
(A MVPN tunnel interface should have relevant generic
support in the IF-MIB and…
Indexes
Column Syntax OID
ciscoMvpnTunnelName
The canonical name assigned to the tunnel. The ifName of
this tunnel interface should have a value equal to
ciscoMvpnTunnelName.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.10.113.1.4.5.1.1
ciscoMvpnTunnelMvrf
Name of the MVRF that this tunnel is associated with.
This object has the same value as mplsVpnVrfName
for the MVRF.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.113.1.4.5.1.2