Standard view Table view

CISCO-MVPN-MIB

        This MIB contains managed object definitions for
Cisco implementation of multicast in VPNs defined 
by the Internet draft: draft-rosen-vpn-mcast-05.txt. 
Note that this MIB works along with the 
L3VPN-MPLS-VPN-MIB.
Source file
CISCO-MVPN-MIB
Last revised
Identity
ciscoMvpnMIB
Base OID
1.3.6.1.4.1.9.10.113
Imported Objects
CISCO-SMI ciscoExperiment
IF-MIB ifIndex
INET-ADDRESS-MIB InetAddress InetAddressType
MPLS-VPN-MIB MplsVpnRouteDistinguisher mplsVpnVrfName
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString RowStatus TimeInterval TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MVPN-MIB::ciscoMvpnMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MVPN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MVPN-MIB::ciscoMvpnMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (74)
ciscoMvpnMIB
.1.3.6.1.4.1.9.10.113
ciscoMvpnNotifications
.1.3.6.1.4.1.9.10.113.0
ciscoMvpnObjects
.1.3.6.1.4.1.9.10.113.1
ciscoMvpnScalars
.1.3.6.1.4.1.9.10.113.1.1
ciscoMvpnMvrfNumber
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.10.113.1.1.1
ciscoMvpnNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.10.113.1.1.2
ciscoMvpnGeneric
.1.3.6.1.4.1.9.10.113.1.2
ciscoMvpnGenericTable
.1.3.6.1.4.1.9.10.113.1.2.1
ciscoMvpnGenericEntry
MPLS-VPN-MIBmplsVpnVrfName
 .1.3.6.1.4.1.9.10.113.1.2.1.1
ciscoMvpnGenOperStatusChange
Enumeration
 .1.3.6.1.4.1.9.10.113.1.2.1.1.1
ciscoMvpnGenOperChangeTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.10.113.1.2.1.1.2
ciscoMvpnGenAssociatedInterfaces
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.10.113.1.2.1.1.3
ciscoMvpnGenRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.113.1.2.1.1.4
ciscoMvpnConfig
.1.3.6.1.4.1.9.10.113.1.3
ciscoMvpnMdtDefaultTable
.1.3.6.1.4.1.9.10.113.1.3.1
ciscoMvpnMdtDefaultEntry
MPLS-VPN-MIBmplsVpnVrfName
 .1.3.6.1.4.1.9.10.113.1.3.1.1
ciscoMvpnMdtDefaultAddrType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.3.1.1.1
ciscoMvpnMdtDefaultAddress r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.3.1.1.2
ciscoMvpnMdtEncapsType r/w
Enumeration
 .1.3.6.1.4.1.9.10.113.1.3.1.1.3
ciscoMvpnMdtDefaultRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.113.1.3.1.1.4
ciscoMvpnMdtDataTable
.1.3.6.1.4.1.9.10.113.1.3.2
ciscoMvpnMdtDataEntry
MPLS-VPN-MIBmplsVpnVrfName
 .1.3.6.1.4.1.9.10.113.1.3.2.1
ciscoMvpnMdtDataRangeAddrType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.3.2.1.1
ciscoMvpnMdtDataRangeAddress r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.3.2.1.2
ciscoMvpnMdtDataWildcardType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.3.2.1.3
ciscoMvpnMdtDataWildcardBits r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.3.2.1.4
ciscoMvpnMdtDataThreshold r/w
kilobits per secondUnsigned32
 .1.3.6.1.4.1.9.10.113.1.3.2.1.5
ciscoMvpnMdtDataRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.113.1.3.2.1.6
ciscoMvpnProtocol
.1.3.6.1.4.1.9.10.113.1.4
ciscoMvpnMrouteMdtTable
.1.3.6.1.4.1.9.10.113.1.4.1
ciscoMvpnMrouteMdtEntry
MPLS-VPN-MIBmplsVpnVrfNameciscoMvpnMrouteMvrfGrpAddrTypeciscoMvpnMrouteMvrfGroupciscoMvpnMrouteMvrfSrcAddrTypeciscoMvpnMrouteMvrfSourceciscoMvpnMrouteUpDownStreamInfo
 .1.3.6.1.4.1.9.10.113.1.4.1.1
ciscoMvpnMrouteMvrfGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.1.1.1
ciscoMvpnMrouteMvrfGroup
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.1.1.2
ciscoMvpnMrouteMvrfSrcAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.1.1.3
ciscoMvpnMrouteMvrfSource
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.1.1.4
ciscoMvpnMrouteUpDownStreamInfo
Enumeration
 .1.3.6.1.4.1.9.10.113.1.4.1.1.5
ciscoMvpnMrouteMdtGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.1.1.6
ciscoMvpnMrouteMdtGroup
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.4.1.1.7
ciscoMvpnMrouteMdtType
Enumeration
 .1.3.6.1.4.1.9.10.113.1.4.1.1.8
ciscoMvpnBgpMdtUpdateTable
.1.3.6.1.4.1.9.10.113.1.4.2
ciscoMvpnBgpMdtUpdateEntry
ciscoMvpnBgpMdtUpdGrpAddrTypeciscoMvpnBgpMdtUpdateGroupciscoMvpnBgpMdtUpdSrcAddrTypeciscoMvpnBgpMdtUpdateSource
 .1.3.6.1.4.1.9.10.113.1.4.2.1
ciscoMvpnBgpMdtUpdGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.2.1.1
ciscoMvpnBgpMdtUpdateGroup
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.2.1.2
ciscoMvpnBgpMdtUpdateRd
MPLS-VPN-MIBMplsVpnRouteDistinguisher
 .1.3.6.1.4.1.9.10.113.1.4.2.1.3
ciscoMvpnBgpMdtUpdSrcAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.2.1.4
ciscoMvpnBgpMdtUpdateSource
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.2.1.5
ciscoMvpnBgpMdtUpdOrigAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.2.1.6
ciscoMvpnBgpMdtUpdateOriginator
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.4.2.1.7
ciscoMvpnBgpMdtUpdNhAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.2.1.8
ciscoMvpnBgpMdtUpdateNexthop
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.4.2.1.9
ciscoMvpnMdtJnRcvTable
.1.3.6.1.4.1.9.10.113.1.4.3
ciscoMvpnMdtJnRcvEntry
MPLS-VPN-MIBmplsVpnVrfNameciscoMvpnMdtJnRcvGrpAddrTypeciscoMvpnMdtJnRcvGroupciscoMvpnMdtJnRcvSrcAddrTypeciscoMvpnMdtJnRcvSource
 .1.3.6.1.4.1.9.10.113.1.4.3.1
ciscoMvpnMdtJnRcvGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.3.1.1
ciscoMvpnMdtJnRcvGroup
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.3.1.2
ciscoMvpnMdtJnRcvSrcAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.3.1.3
ciscoMvpnMdtJnRcvSource
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.3.1.4
ciscoMvpnMdtJnRcvUpTime
SNMPv2-TCTimeInterval
 .1.3.6.1.4.1.9.10.113.1.4.3.1.5
ciscoMvpnMdtJnRcvExpTime
SNMPv2-TCTimeInterval
 .1.3.6.1.4.1.9.10.113.1.4.3.1.6
ciscoMvpnMdtJnSendTable
.1.3.6.1.4.1.9.10.113.1.4.4
ciscoMvpnMdtJnSendEntry
MPLS-VPN-MIBmplsVpnVrfNameciscoMvpnMdtJnSendGrpAddrTypeciscoMvpnMdtJnSendGroupciscoMvpnMdtJnSendSrcAddrTypeciscoMvpnMdtJnSendSource
 .1.3.6.1.4.1.9.10.113.1.4.4.1
ciscoMvpnMdtJnSendGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.4.1.1
ciscoMvpnMdtJnSendGroup
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.4.1.2
ciscoMvpnMdtJnSendSrcAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.4.1.3
ciscoMvpnMdtJnSendSource
OctetString
 .1.3.6.1.4.1.9.10.113.1.4.4.1.4
ciscoMvpnMdtJnSendMdtGrpAddrType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.113.1.4.4.1.5
ciscoMvpnMdtJnSendMdtGroup
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.10.113.1.4.4.1.6
ciscoMvpnMdtJnSendMdtRefCt
Unsigned32
 .1.3.6.1.4.1.9.10.113.1.4.4.1.7
ciscoMvpnTunnelTable
.1.3.6.1.4.1.9.10.113.1.4.5
ciscoMvpnTunnelEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.10.113.1.4.5.1
ciscoMvpnTunnelName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.10.113.1.4.5.1.1
ciscoMvpnTunnelMvrf
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.10.113.1.4.5.1.2
ciscoMvpnConformance
.1.3.6.1.4.1.9.10.113.2
ciscoMvpnGroups
.1.3.6.1.4.1.9.10.113.2.1
ciscoMvpnCompliances
.1.3.6.1.4.1.9.10.113.2.2
Dependencies (10) 8 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. INET-ADDRESS-MIBrfc
  9. SNMP-FRAMEWORK-MIBrfc
  10. MPLS-VPN-MIBcisco
  11. CISCO-MVPN-MIBciscoselected
Conformance Groups (10)
ciscoMvpnScalarGroup
ciscoMvpnMvrfNumber ciscoMvpnNotificationEnable
Collection of scalar objects required for MVPN management.
 .1.3.6.1.4.1.9.10.113.2.1.1
ciscoMvpnMIBGenericGroup
ciscoMvpnGenOperStatusChange ciscoMvpnGenOperChangeTime ciscoMvpnGenAssociatedInterfaces ciscoMvpnGenRowStatus
Collection of objects needed for MVPN MVRF management.
 .1.3.6.1.4.1.9.10.113.2.1.2
ciscoMvpnMIBMdtDefaultGroup
ciscoMvpnMdtDefaultAddrType ciscoMvpnMdtDefaultAddress ciscoMvpnMdtEncapsType ciscoMvpnMdtDefaultRowStatus
Collection of objects needed for MVPN default MDT group
management.
 .1.3.6.1.4.1.9.10.113.2.1.3
ciscoMvpnMIBMdtDataGroup
ciscoMvpnMdtDataRangeAddrType ciscoMvpnMdtDataRangeAddress ciscoMvpnMdtDataWildcardType ciscoMvpnMdtDataWildcardBits ciscoMvpnMdtDataThreshold ciscoMvpnMdtDataRowStatus
Collection of objects needed for MVPN data MDT group
management.
 .1.3.6.1.4.1.9.10.113.2.1.4
ciscoMvpnMIBMrouteMdtGroup
ciscoMvpnMrouteMdtGrpAddrType ciscoMvpnMrouteMdtGroup ciscoMvpnMrouteMdtType
Collection of objects that list sources in a MVRF
and the corresponding MDT groups.
 .1.3.6.1.4.1.9.10.113.2.1.5
ciscoMvpnMIBBgpMdtUpdateGroup
ciscoMvpnBgpMdtUpdateRd ciscoMvpnBgpMdtUpdOrigAddrType ciscoMvpnBgpMdtUpdateOriginator ciscoMvpnBgpMdtUpdNhAddrType ciscoMvpnBgpMdtUpdateNexthop
Collection of objects needed for MVPN BGP MDT updates
related information.
 .1.3.6.1.4.1.9.10.113.2.1.6
ciscoMvpnMIBMdtJnRcvGroup
ciscoMvpnMdtJnRcvUpTime ciscoMvpnMdtJnRcvExpTime
Collection of objects needed for management of MVPN MDT
data joins received by a device.
 .1.3.6.1.4.1.9.10.113.2.1.7
ciscoMvpnMIBMdtJnSendGroup
ciscoMvpnMdtJnSendMdtGrpAddrType ciscoMvpnMdtJnSendMdtGroup ciscoMvpnMdtJnSendMdtRefCt
Collection of objects needed for management of MVPN MDT
data joins received by a device.
 .1.3.6.1.4.1.9.10.113.2.1.8
ciscoMvpnTunnelGroup
ciscoMvpnTunnelName ciscoMvpnTunnelMvrf
Objects required for MDT tunnel interface management.
 .1.3.6.1.4.1.9.10.113.2.1.9
ciscoMvpnNotificationGroup
ciscoMvpnMvrfChange
A collection of MVPN notifications.
 .1.3.6.1.4.1.9.10.113.2.1.10
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.113.2.2.1
Compliance statement for agents that support read-create
so that both configuration and monitoring can be
accomplished via this MIB module.
Required groups
mandatory ciscoMvpnScalarGroup
mandatory ciscoMvpnMIBGenericGroup
mandatory ciscoMvpnMIBMdtDefaultGroup
mandatory ciscoMvpnMIBMdtDataGroup
mandatory ciscoMvpnMIBMrouteMdtGroup
mandatory ciscoMvpnMIBBgpMdtUpdateGroup
mandatory ciscoMvpnMIBMdtJnRcvGroup
mandatory ciscoMvpnMIBMdtJnSendGroup
mandatory ciscoMvpnTunnelGroup
mandatory ciscoMvpnNotificationGroup
Object refinements
ObjectAccessSyntaxDescription
ciscoMvpnGenRowStatus
SNMPv2-TCRowStatus
 Support for notReady(3) and createAndWait(5) is
not required.
ciscoMvpnMdtDefaultAddrType
Not all Internet address types need to be supported.
ciscoMvpnMdtEncapsType
Not all encapsulation types defined need to be supported.
Only one type may be supported by default.
ciscoMvpnMdtDefaultRowStatus
SNMPv2-TCRowStatus
 Support for notReady(3) and createAndWait(5) is
not required.
ciscoMvpnMdtDataRangeAddrType
Not all Internet address types need to be supported.
ciscoMvpnMdtDataWildcardType
Not all Internet address types need to be supported.
ciscoMvpnMdtDataRowStatus
SNMPv2-TCRowStatus
 Support for notReady(3) and createAndWait(5) is
not required.
ciscoMvpnMrouteMdtGrpAddrType
Not all Internet address types need to be supported.
ciscoMvpnBgpMdtUpdOrigAddrType
Not all Internet address types need to be supported.
ciscoMvpnBgpMdtUpdNhAddrType
Not all Internet address types need to be supported.
ciscoMvpnMdtJnSendMdtGrpAddrType
Not all Internet address types need to be supported.

OID .1.3.6.1.4.1.9.10.113.2.2.2
Compliance statement for agents that support the
monitoring of MVRFs via this MIB module.
Required groups
mandatory ciscoMvpnScalarGroup
mandatory ciscoMvpnMIBGenericGroup
mandatory ciscoMvpnMIBMdtDefaultGroup
mandatory ciscoMvpnMIBMdtDataGroup
mandatory ciscoMvpnMIBMrouteMdtGroup
mandatory ciscoMvpnMIBBgpMdtUpdateGroup
mandatory ciscoMvpnMIBMdtJnRcvGroup
mandatory ciscoMvpnMIBMdtJnSendGroup
mandatory ciscoMvpnTunnelGroup
mandatory ciscoMvpnNotificationGroup
Object refinements
ObjectAccessSyntaxDescription
ciscoMvpnGenRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required and active(1) is the
only status that needs to be supported.
ciscoMvpnMdtDefaultAddrType readonly
Not all Internet address types need to be supported.
Write access is not required.
ciscoMvpnMdtDefaultAddress readonly
Write access is not required.
ciscoMvpnMdtEncapsType readonly
Not all encapsulation types defined need to be supported.
Only one type may be supported by default. Write access
is not required.
ciscoMvpnMdtDefaultRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required and active(1) is the
only status that needs to be supported.
ciscoMvpnMdtDataRangeAddrType readonly
Not all Internet address types need to be supported.
Write access is not required.
ciscoMvpnMdtDataRangeAddress readonly
Write access is not required.
ciscoMvpnMdtDataWildcardType readonly
Not all Internet address types need to be supported.
Write access is not required.
ciscoMvpnMdtDataWildcardBits readonly
Write access is not required.
ciscoMvpnMdtDataThreshold readonly
Write access is not required.
ciscoMvpnMdtDataRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required and active(1) is the
only status that needs to be supported.
ciscoMvpnMrouteMdtGrpAddrType
Not all Internet address types need to be supported.
ciscoMvpnBgpMdtUpdOrigAddrType
Not all Internet address types need to be supported.
ciscoMvpnBgpMdtUpdNhAddrType
Not all Internet address types need to be supported.
ciscoMvpnMdtJnSendMdtGrpAddrType
Not all Internet address types need to be supported.
Notifications / Traps (1)
NameOIDDescription
ciscoMvpnMvrfChange
ciscoMvpnGenOperStatusChange
.1.3.6.1.4.1.9.10.113.0.2
A ciscoMvpnMvrfChange notification signifies a change about
a MVRF in the device. The change event can be creation of
the MVRF, deletion of the MVRF or an update on the default
or data MDT configuration of the MVRF. The change event
is indicated by ciscoMvpnGenOperStatusChange embedded in
the notification. The user can then query
ciscoMvpnGenericTable, ciscoMvpnMdtDefaultTable and/or
ciscoMvpnMdtDataTable to get the details of the change as
necessary.

Note: Since the creation of a MVRF is often followed by
configuration of default and data MDT groups for the MVRF,
more than one (three at most) notifications for a MVRF may
be generated serially, and it is really not necessary to
generate all three of them. An agent may choose to generate a
notification for the last event only, that is for data MDT
configuration.

Similarly, deletion of default or data MDT configuration on a
MVRF happens before a MVRF is deleted, it is recommended
that the agent send the notification for MVRF deletion
event only.