CISCO-MPOA-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
7
.1.3.6.1.4.1.9.9.99999.1.1.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMpcExtShortcutVCCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MPOA-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MPOA-EXT-MIB::cMpcExtShortcutVCCTable'
An extension to the mpcConfig table in the
MPOA-MIB. This table identifies the VCI and VPI of
each shortcut that is setup by an MPC.
A shortcut is a VCC that is setup between the Ingress
and Egress MPC.
cMpcExtShortcutVCCEntry row .1.3.6.1.4.1.9.9.99999.1.1.1.1
Entries in the table for the shortcut VCCs setup by an MPC.
Column Syntax OID
The VPI of the shortcut VCC setup by the MPC specified by MPC
index. The destination of the shortcut VCC is specified by
cmpcDestAtmAddr.
LAN-EMULATION-CLIENT-MIBVpiInteger
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.99999.1.1.1.1.1
The VCI of the shortcut VCC setup by the MPC specified by the
MPC index. The destination of the shortcut VCC is specified by
cmpcDestAtmAddr.
LAN-EMULATION-CLIENT-MIBVciInteger
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.99999.1.1.1.1.2
The ATM address of the destination of this shortcut VCC.
ATM-FORUM-TC-MIBAtmAddress
Type Constraints:
range: 8
range: 20
.1.3.6.1.4.1.9.9.99999.1.1.1.1.3
.1.3.6.1.4.1.9.9.99999.1.2.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMpcInterfaceMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MPOA-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MPOA-EXT-MIB::cMpcInterfaceMappingTable'
Table that contains information about the MPC <-->
interface binding.
cMpcInterfaceMappingEntry row .1.3.6.1.4.1.9.9.99999.1.2.1.1
Each row in this table specifies the interface (by ifIndex)
to which an MPC (specified by mpcIndex) is bound.
Creation of an MPC does not create an entry in this table.
After successfully creating an MPC, the MPC has t…
Column Syntax OID
The Interface (specified by the cMpcInterfaceMappingIndex)
to which the MPS (specified by mpcIndex) is bound to.
This interface has to be an ATM physical interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.99999.1.2.1.1.1
Row status of the row in the mapping table.
Specifying a 'valid' value for the cMpcInterfaceMappingIndex
(interface index of an ATM physical interface) in the set
operation, along with a value of 4 (createAndGo) for t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.99999.1.2.1.1.2
.1.3.6.1.4.1.9.9.99999.1.3.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cMpsInterfaceMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MPOA-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MPOA-EXT-MIB::cMpsInterfaceMappingTable'
Table that contains information about the MPS <-->
interface binding.
cMpsInterfaceMappingEntry row .1.3.6.1.4.1.9.9.99999.1.3.1.1
Each row in this table specifies the interface (by ifIndex)
to which an MPS (specified by mpsIndex) is bound.
Creation of an MPS does not create an entry in this table.
After successfully creating an MPS, the MPS has t…
Column Syntax OID
The Interface (specified by the cMpsInterfaceMappingIndex)
to which the MPS (specified by mpsIndex) is bound to.
This interface has to be an ATM physical interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.99999.1.3.1.1.1
Row status of the row in the mapping table.
Specifying a 'valid' value for the cMpsInterfaceMappingIndex
(interface index of an ATM physical interface) in the set
operation, along with a value of 4 (createAndGo) for t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.99999.1.3.1.1.2