CISCO-MGX82XX-RPM-CONN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

rpmChanGrpTable

table

.1.3.6.1.4.1.351.110.5.2.10.1.1 · 1 row entry · 37 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk rpmChanGrpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-RPM-CONN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-RPM-CONN-MIB::rpmChanGrpTable'

This table contains endpoint configuration
information for connections applicable to
RPM service module.

rpmChanGrpEntry row .1.3.6.1.4.1.351.110.5.2.10.1.1.1

An entry for logical channel. Each entry
corresponds to a connection endpoint identified
by Slot number and channel number.

Indexes

rpmChanSlotNum rpmChanNum

Column Syntax OID

rpmChanSlotNum

Specifies the slot number of the RPM card.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.1

rpmChanInterface

This is the RPM's backplane interface.
Currently there is only one interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.2

rpmChanNum

This object identifies the channel number.
This is also called Logical Connection Number(LCN).
This is a unique number which identifies a
connection.
The LCN maps VPI and VCI.
For VCC, VCI range is 1..3825, and LCN r…

Integer32

Constraints:
range: 16-4095

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.3

rpmChanRowStatus

This indicates the status of this channel.

add(1) : Channel is added.
del(2) : channel is deleted.
mod(3) : Set to this value before modifying objects
related to connection endpoints.

Enumeration

Enumerated Values:

1	add
2	del
3	mod

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.4

rpmChanVcd

Virtual Circuit Descriptor. A unique number
which identifies a connection.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.5

rpmChanVpi

The VPI value for this channel.
For VPC, VPI range is 1..255 and
LCN range is 3841..4095.
LCN = VPI + 3840

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.6

rpmChanVci

The VCI value for this channel.
For VCC, VCI range is 1..3825, and
LCN range is 16..3840.
LCN = VCI + 16.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.7

rpmChanSubInterface

This is the RPM's backplane sub-interface.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.8

rpmChanLocalVpi

This VPI together with the local VCI
and NSAP represents the local end point
in this connection. The VPI value is zero for
rpmChanConnType value of vcc(2).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.9

rpmChanLocalVci

This VCI together with the local
VPI and NSAP represents the local
end point in this connection.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.10

rpmChanLocalNsap

This object identifies the local NSAP address.

The bytes are mapped as follows:
prefix : 13 bytes
Cisco ID : 2 bytes
Reserved : 2 bytes
Slot/Port : 2 bytes[5 bit slot, 11 bits port]
Se…

RpmNsapAddress

Type Constraints:
range: 20

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.11

rpmChanRemoteVpi

This VPI together with the remote
VCI and NSAP represents the remote
end point in this connection.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.12

rpmChanRemoteVci

This VCI together with the remote
VPI and NSAP represents the remote
end point in this connection.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.13

rpmChanRemoteNsap

This object identifies the remote NSAP address.

The bytes are mapped as follows:
prefix : 13 bytes
Cisco ID : 2 bytes
Reserved : 2 bytes
Slot/Port : 2 bytes[5 bit slot, 11 bits port]
S…

RpmNsapAddress

Type Constraints:
range: 20

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.14

rpmChanType

This object identifies the channel type

svc(1) : Switched Virtual Connection
pvc(2) : Permanent Virtual Connection
spvc(3) : Soft PVC.

Enumeration

Enumerated Values:

1	svc
2	pvc
3	spvc

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.15

rpmChanConnType

This specifies the connection type
vpc(1) : Virtual Path Connection
vcc(1) : Virtual Channel Connection

Enumeration

Enumerated Values:

1	vpc
2	vcc

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.16

rpmChanServiceType

This object identifies the connection service type.

cbr (1) : Constant Bit Rate
vbr (2) : Variable Bit Rate
ubr (4) : Unspecified Bit Rate
atfr (5) : ATM Frame Relay
abrstd (6) : Standard ABR
…

Enumeration

Enumerated Values:

1	cbr
2	vbr
4	ubr
5	atfr
6	abrstd
7	abrfst

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.17

rpmChanMastership

This specifies which end of the connection
is the master. This is used by PXM to determine
if this end point is master or slave.

Enumeration

Enumerated Values:

1	master
2	slave
3	unknown

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.18

rpmChanRtePriority

This is also known as class of service,
it is used by PXM to determine how important
this connection is when selecting connections
to route.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.19

rpmChanMaxCost

Maximum allowed cost. It is related to
Cost Based Routing. This is used by PXM so
that it won't choose a path with a cost
greater than this configured level.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.20

rpmChanRestrictTrkType

Restricted trunk type for routing, used by PXM.
It specifies that the connection either cannot
be routed over satellite trunks or terrestrial
trunks, or it can be on any type of trunk.

Enumeration

Enumerated Values:

1	noRestriction
2	terrestrialTrunk
3	satelliteTrunk

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.21

rpmChanPCR

Peak cell rate.(in cells per sec.)

cells-per-secondInteger32

Constraints:
range: 0-353208

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.22

rpmChanRemotePCR

Peak cell rate of the remote endpoint of
the connection. If not set, its value will
be same as the value of rpmChanPCR.

Integer32

Constraints:
range: 0-353208

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.23

rpmChanMCR

Minimum cell rate.(in cells per sec.).

cells-per-secondInteger32

Constraints:
range: 0-353208

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.24

rpmChanRemoteMCR

Minimum cell rate of the remote endpoint.
If this is not set, its value will be same
as value of rpmChanMCR.

Integer32

Constraints:
range: 0-353208

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.25

rpmChanPercentUtil

This is the expected long-term utilization of the
channel by this end-point.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.26

rpmChanRemotePercentUtil

This is the expected long-term utilization of the
channel by the other end-point. If this is not
specified in the connection setup request,
it'll be set to be the same as the local end.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.27

rpmChanEncapType

This object identifies the ATM adaptation
layer (AAL) and Encapsulation type.

aal5snap - LLC/SNAP precedes the protocol datagram.
aal34smds - Encapsulation for SMDS network.
aal5nlpid - Encapsulation …

Enumeration

Enumerated Values:

1	aal5snap
2	aal34smds
3	aal5nlpid
4	qsaal
5	ilmi
6	aal5muxXNS
7	aal5muxIP
8	aal5muxVINES
9	aal5muxDECNET
10	aal5muxNOVELL1
11	ppp
12	unknown

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.28

rpmChanMidLow

Starting Message Identifier Number for this PVC.

Integer32

Constraints:
range: 0-1023

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.29

rpmChanMidHigh

Ending Message Identifier Number for this PVC.

Integer32

Constraints:
range: 0-1023

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.30

rpmChanBurstSize

The Maximum number of ATM cells the
virtual circuit can transmit.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.31

rpmChanInArpFreq

Specifies how often Inverse ARP datagrams
will be sent on this virtual circuit. The
value zero will disable the IN-ARP for this
channel. This object is supported only
for the value of rpmChanEncapType = aal5snap.

minutesInteger32

Constraints:
range: 0-60

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.32

rpmChanOAMloopback

This object specifies how often to generate
an OAM F5 loopback cell from this virtual circuit.
The value zero will disable generation of OAM F5
loopback cells.

secondsInteger32

Constraints:
range: 0-600

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.33

rpmChanState

This indicates the status of this channel.
1 ==> notConfigured
2 ==> active
3 ==> failed.

Currently 'failed' state is not supported.
When the channel is not added, the state is
notConfigured.

Enumeration

Enumerated Values:

1	notConfigured
2	active
3	failed

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.34

rpmChanVirtualTemplate

Specifies the Virtual Template used for CISCO PPP.
If it is not using Virtual Template then this value
is zero.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.35

rpmChanAbrRDF

This is valid only for ABR Service Type.
Rate Decrease Factor: Controls the rate
decrease which occurs when backward RM-cells
with CI=1 are received. Larger values lead to
faster rate decrease.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.36

rpmChanAbrRIF

This is valid only for ABR Service Type.
Rate Increase Factor: Controls the rate
increase which occurs when a backward RM-cell
is received with CI=0 and NI=0. Larger values
lead to faster rate increase.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.351.110.5.2.10.1.1.1.37