CISCO-MDI-METRICS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
23

cfmMdiMetricsTable

table
.1.3.6.1.4.1.9.9.699.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cfmMdiMetricsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MDI-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MDI-METRICS-MIB::cfmMdiMetricsTable' 
This table contains aggregate data maintained by a flow
monitor for traffic flows for which it is computing MDI
metrics.
          
This table has an sparse dependent relationship on the
cfmFlowMetricsTable (defined by the CISCO-FLOW-MONITOR-MIB),
containing a row for each row in the cfmFlowMetricsTable having
a corresponding instance of cfmFlowMetricsCollected with the
'mdi' bit set to one.
cfmMdiMetricsEntry row .1.3.6.1.4.1.9.9.699.1.1.1.1
An entry describes cumulative and aggregate MDI metrics for a
single traffic flow.

The devices creates a row in the cfmMdiMetricsTable when a flow
monitor starts monitoring a traffic flow and has been confi…
Indexes
Column Syntax OID
cfmMdiMetricsCfgRateType
This object indicates how the corresponding flow monitor
computes the DF for the traffic flow.
CISCO-FLOW-MONITOR-TC-MIBFlowCfgRateType
Type Values:
1auto
2ipPktRate
3ipBitRate
4mediaRate
 .1.3.6.1.4.1.9.9.699.1.1.1.1.1
cfmMdiMetricsCfgBitRate
This object indicates the units for the corresponding instance
of cfmMdiMetricsCfgRate. The value of this column only has
relevance if the corresponding instance of
cfmMdiMetricsCfgRateType is 'ipBitRate' or 'mediaRate…
CISCO-FLOW-MONITOR-TC-MIBFlowBitRateUnits
Type Values:
1bps
2kbps
3mbps
4gbps
 .1.3.6.1.4.1.9.9.699.1.1.1.1.2
cfmMdiMetricsCfgRate
This object indicates the configured bit rate used by the flow
monitor to compute the DF for the traffic flow. The value of
this column only has relevance if the corresponding instance of
cfmMdiMetricsCfgRateType is 'i…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.9.699.1.1.1.1.3
cfmMdiMetricsCfgMediaPktSize
This object indicates the configured media packet size used by
the flow monitor to compute the DF for the traffic flow. The
value of this column only has relevance if the corresponding
instance of cfmMdiMetricsCfgRateT…
octetsUnsigned32
Constraints:
range: 64-65535
 .1.3.6.1.4.1.9.9.699.1.1.1.1.4
cfmMdiMetricsValid
This object indicates which metrics are valid for the traffic
flow:

'lostPkts'
If this bit is set to '1', then the corresponding
instance of cfmMdiMetricsLostPkts is valid.
…
Bits
Enumerated Values:
0lostPkts
1mediaLossRate
2mediaDiscontinuityCount
 .1.3.6.1.4.1.9.9.699.1.1.1.1.5
cfmMdiMetricsLostPkts
This object indicates the number of packets lost for the
traffic flow.

The value of this column is valid if and only if the 'lostPkts'
bit in the corresponding instance of cfmMdiMetricsValid is set
to '1'.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.699.1.1.1.1.6
cfmMdiMetricsMlrScale
This object indicates the scale factor for the corresponding
instance of cfmMdiMetricsMlr.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corresponding instance of
cfmMdiM…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricScale
Type Values:
1yocto
2zepto
3atto
4femto
5pico
6nano
7micro
8milli
9units
10kilo
11mega
12giga
13tera
14exa
15peta
16zetta
17yotta
 .1.3.6.1.4.1.9.9.699.1.1.1.1.7
cfmMdiMetricsMlrPrecision
This object indicates the precision for the corresponding
instance of cfmMdiMetricsMlr.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corresponding instance of
cfmMdiMetr…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricPrecision
Type Constraints:
range: -8..-1
range: 1..9
 .1.3.6.1.4.1.9.9.699.1.1.1.1.8
cfmMdiMetricsMlr
This object indicates the MLR for the traffic flow since the
flow monitor started collecting data for the traffic flow.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corr…
packets per secondCISCO-FLOW-MONITOR-TC-MIBFlowMetricValue
Type Constraints:
range: -1000000000..1000000000
 .1.3.6.1.4.1.9.9.699.1.1.1.1.9
cfmMdiMetricsMdc
This object indicates the media discontinuity events count for
the traffic flow since the flow monitor started collecting data
for the traffic flow.

The value of this column is valid if and only if the
'm…
EventsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.699.1.1.1.1.10

cfmMdiMetricsIntTable

table
.1.3.6.1.4.1.9.9.699.1.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cfmMdiMetricsIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MDI-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MDI-METRICS-MIB::cfmMdiMetricsIntTable' 
This table contains historic MDI metrics for the traffic flows
monitored by each of the flow monitors supported by the device.
          
This table has an sparse dependent relationship on the
cfmFlowMetricsIntTable (defined by the CISCO-FLOW-MONITOR-MIB),
containing a row for each row in the cfmFlowMetricsIntTable
having a corresponding instance of cfmFlowMetricsCollected with
the 'mdi' bit set to one.
cfmMdiMetricsIntEntry row .1.3.6.1.4.1.9.9.699.1.1.3.1
An entry describes MDI metrics collected for a previous
measurement interval for a corresponding traffic flow.
Indexes
Column Syntax OID
cfmMdiMetricsIntValid
This object indicates which metrics are valid for the
measurement interval:

'lostPkts'
If this bit is set to '1', then the corresponding
instance of cfmMdiMetricsIntLostPkts is valid.
…
Bits
Enumerated Values:
0lostPkts
1vbMin
2vbMax
3mediaRate
4delayFactor
5mediaLossRate
6mediaDiscontinuityCount
 .1.3.6.1.4.1.9.9.699.1.1.3.1.1
cfmMdiMetricsIntLostPkts
This object indicates the number of packets lost for the
traffic flow during the measurement interval.

The value of this column is valid if and only if the 'lostPkts'
bit in the corresponding instance of …
packetsCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount .1.3.6.1.4.1.9.9.699.1.1.3.1.2
cfmMdiMetricsIntVbMin
This object indicates the minimum virtual buffer size computed
for the traffic flow over the course of the measurement
interval.

The value of this column is valid if and only if the 'vbMin'
bit in the cor…
bytesCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount .1.3.6.1.4.1.9.9.699.1.1.3.1.3
cfmMdiMetricsIntVbMax
This object indicates the maximum virtual buffer size computed
for the traffic flow over the course of the measurement
interval.

The value of this column is valid if and only if the 'vbMax' bit
in the cor…
bytesCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount .1.3.6.1.4.1.9.9.699.1.1.3.1.4
cfmMdiMetricsIntMrUnits
This object indicates the units for the corresponding instance
of cfmMdiMetricsIntMr.

The value of this column is valid if and only if the 'mediaRate'
bit in the corresponding instance of cfmMdiMetricsInt…
CISCO-FLOW-MONITOR-TC-MIBFlowBitRateUnits
Type Values:
1bps
2kbps
3mbps
4gbps
 .1.3.6.1.4.1.9.9.699.1.1.3.1.5
cfmMdiMetricsIntMr
This object indicates the media rate used by the flow monitor
to compute the DF for the traffic flow. If the corresponding
instance of cfmMdiMetricsCfgRateType is 'auto', then the value
of this column indicates the MR …
CISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount .1.3.6.1.4.1.9.9.699.1.1.3.1.6
cfmMdiMetricsIntDfScale
This object indicates the scaling factor for the corresponding
instance of cfmMdiMetricsIntDf.

The value of this column is valid if and only if the
'delayFactor' bit in the corresponding instance of
cfmMd…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricScale
Type Values:
1yocto
2zepto
3atto
4femto
5pico
6nano
7micro
8milli
9units
10kilo
11mega
12giga
13tera
14exa
15peta
16zetta
17yotta
 .1.3.6.1.4.1.9.9.699.1.1.3.1.7
cfmMdiMetricsIntDfPrecision
This object indicates the precision for the corresponding
instance of cfmMdiMetricsIntDf.

The value of this column is valid if and only if the
'delayFactor' bit in the corresponding instance of
cfmMdiMetr…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricPrecision
Type Constraints:
range: -8..-1
range: 1..9
 .1.3.6.1.4.1.9.9.699.1.1.3.1.8
cfmMdiMetricsIntDf
This object indicates the DF for the traffic flow during the
measurement interval.

The value of this column is valid if and only if the
'delayFactor' bit in the corresponding instance of
cfmMdiMetricsIntV…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricValue
Type Constraints:
range: -1000000000..1000000000
 .1.3.6.1.4.1.9.9.699.1.1.3.1.9
cfmMdiMetricsIntMlrScale
This object indicates the scaling factor for the corresponding
instance of cfmMdiMetricsIntMlr.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corresponding instance of
cf…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricScale
Type Values:
1yocto
2zepto
3atto
4femto
5pico
6nano
7micro
8milli
9units
10kilo
11mega
12giga
13tera
14exa
15peta
16zetta
17yotta
 .1.3.6.1.4.1.9.9.699.1.1.3.1.10
cfmMdiMetricsIntMlrPrecision
This object indicates the precision for the corresponding
instance of cfmMdiMetricsIntMlr.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corresponding instance of
cfmMdiM…
CISCO-FLOW-MONITOR-TC-MIBFlowMetricPrecision
Type Constraints:
range: -8..-1
range: 1..9
 .1.3.6.1.4.1.9.9.699.1.1.3.1.11
cfmMdiMetricsIntMlr
This object indicates the MLR for the traffic flow during the
measurement interval.

The value of this column is valid if and only if the
'mediaLossRate' bit in the corresponding instance of
cfmMdiMetricsI…
packets per secondCISCO-FLOW-MONITOR-TC-MIBFlowMetricValue
Type Constraints:
range: -1000000000..1000000000
 .1.3.6.1.4.1.9.9.699.1.1.3.1.12
cfmMdiMetricsIntMdc
This object indicates the media discontinuity events count for
the traffic flow during the measurement interval.

The value of this column is valid if and only if the
'mediaDiscontinuityCount' bit in the c…
EventsCISCO-REPORT-INTERVAL-TC-MIBReportIntervalCount .1.3.6.1.4.1.9.9.699.1.1.3.1.13