CISCO-MAU-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
3

cmExtJackConfigTable

table
.1.3.6.1.4.1.9.9.398.1.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmExtJackConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MAU-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MAU-EXT-MIB::cmExtJackConfigTable' 
This table contains management information about MAUs
attached to interfaces with managed jacks.  The 
objects in this table are in addition to the objects
in the ifJackTable.
cmExtJackConfigEntry row .1.3.6.1.4.1.9.9.398.1.1.1.1
An entry containing additional management information
for a particular jack.
Indexes
No indexes recorded
Column Syntax OID
cmExtJackState
Indicates the state of a particular jack.

Within a particular MAU, setting this to 'active' on
a jack which is not the current active jack will
deactivate the current active jack.

Setting…
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.398.1.1.1.1.1

cmExtIfAutoMdixConfigTable

table
.1.3.6.1.4.1.9.9.398.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmExtIfAutoMdixConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MAU-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MAU-EXT-MIB::cmExtIfAutoMdixConfigTable' 
This table contains Auto-MDIX configuration
information for MAUs attached to interfaces in the
device. An entry appears in this table for each 
active Auto-MDIX capable MAU connected to 
interfaces in the device.
cmExtIfAutoMdixConfigEntry row .1.3.6.1.4.1.9.9.398.1.2.1.1
An entry containing Auto-MDIX configuration
information for a MAU connected to the interface.
Indexes
Column Syntax OID
cmExtIfAutoMdixEnabled
Specifies if Auto-MDIX feature is enabled on
the MAU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.398.1.2.1.1.1

cmExtIfMauTrafficTable

table
.1.3.6.1.4.1.9.9.398.1.3.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmExtIfMauTrafficTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MAU-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MAU-EXT-MIB::cmExtIfMauTrafficTable' 
The (conceptual) table that identifies the type of traffic
carried by the interfaces associated with the MAUs in the device.
This table is sparse dependant on ifMauTable.
cmExtIfMauTrafficEntry row .1.3.6.1.4.1.9.9.398.1.3.1.1
An entry (conceptual row) in the cmExtIfMauTrafficEntry. Each
entry contains the type of traffic carried by the interface
associated with the MAU identified by the indices.
Indexes
Column Syntax OID
cmExtIfMauTrafficType
This object is used to identify the type of traffic carried
by the MAU. This object can take the following values
other(1) - The traffic type is other than anything
defined below
adminControl(2)…
Enumeration
Enumerated Values:
1other
2adminControl
3user
 .1.3.6.1.4.1.9.9.398.1.3.1.1.1