CISCO-LWAPP-TUNNEL-MIB Table View

This table contains the list of tunnel gateways configured
on WLC.

clGatewayTunnelEntry row .1.3.6.1.4.1.9.9.848.3.1.1

Each entry represents a conceptual row in this table. For
each tunnel created to the gateway, there will be a row.

Indexes

clGatewayTunnelName clGatewayTunnelType

Column	Syntax	OID
clGatewayTunnelName This object represents the name of tunnel gateway.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.9.9.848.3.1.1.1
clGatewayTunnelType This object represents the type of the tunnel gateway. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type EoGRE.	Enumeration Enumerated Values: 1 none 2 pmipv6 3 gtpv2 4 eogre	.1.3.6.1.4.1.9.9.848.3.1.1.2
clGatewayTunnelAddressType This object specifies the IP address type for tunnel.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.848.3.1.1.3
clGatewayTunnelAddress This object specifies the IP address of the tunnel gateway.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.848.3.1.1.4
clGatewayTunnelStatus This object specifies the tunnel status. A value of 'true' indicates that the tunnel is up. A value of 'false' indicates that the tunnel is down.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.1.1.5
clGatewayTunnelRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.3.1.1.6
clGatewayTunnelAdminStatus This object represents whether the tunnel is enabled to pass WLAN traffic or not. The traffic can reach gateway based on the reachability of gateway. A value of 'true' indicates that the tunnel mapped to WLAN via the pr…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.1.1.7
clGatewayTunnelMtu This object represents the MTU of the tunnel between WLC and gateway.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.1.1.8
clGatewayTunnelFlapCount This object represents the number of times the tunnel between WLC and gateway is flapped.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.1.1.9
cLGatewayTunnelSourceInterface This object specifies the source interface to tunnel. If not set value of cLGatewayInterface will be used.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.848.3.1.1.10

This table contains the list of domains created, each domain
contains maximum of two gateways. At any given time only one
gateway is active in a domain.

clGatewayDomainEntry row .1.3.6.1.4.1.9.9.848.3.2.1

This object represents an entry of domain configuration
details.

Indexes

clGatewayDomainName clGatewayDomainTunnelType

Column	Syntax	OID
clGatewayDomainName This object represents name of the domain.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.9.9.848.3.2.1.1
clGatewayDomainTunnelType This object represents type of the gateway tunnel that domain contains. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type…	Enumeration Enumerated Values: 1 none 2 pmipv6 3 gtpv2 4 eogre	.1.3.6.1.4.1.9.9.848.3.2.1.2
clGatewayDomainActiveGateway This object represents name of the active gateway in the domain.	OctetString	.1.3.6.1.4.1.9.9.848.3.2.1.3
clGatewayDomainPrimaryGateway This object specifies the primary gateway of the domain.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.848.3.2.1.4
clGatewayDomainSecondaryGateway This object represents the secondary gateway of the domain.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.848.3.2.1.5
clGatewayDomainRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.3.2.1.6
clGatewayDomainAdminStatus This is the admin status of tunnel domain.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.848.3.2.1.7
clGatewayDomainRedundancyModel This is the tunnel redundancy mode for this domain. nonrevertive - Active tunnel will not switch back on primary tunnel until next tunnel switchover. revertive - Active tunnel will switch back on prima…	Enumerationr/w Enumerated Values: 0 nonrevertive 1 revertive	.1.3.6.1.4.1.9.9.848.3.2.1.8

This table contains the list of gateways attached to
the domain. At maximum there will be 2 gateways in domain.

clGatewayDomainGatewayListEntry row .1.3.6.1.4.1.9.9.848.3.3.1

Each entry represents a conceptual row in this table.
For each gateway added to the domain will be a row.

Indexes

clGatewayDomainName clGatewayDomainTunnelType clGatewayTunnelName

Column	Syntax	OID
clGatewayDomainGatewayListRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.3.3.1.1

This table contains the list of profiles created. Rules are
attached to the profile. Maximum rules attached to per
profile is 32.

clGatewayProfileEntry row .1.3.6.1.4.1.9.9.848.3.4.1

Each entry represents a conceptual row in this table.
For each profile there will be a row.

Indexes

clGatewayProfileName

Column	Syntax	OID
clGatewayProfileName This object represents name of the gateway profile.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.9.9.848.3.4.1.1
clGatewayProfileDhcpOpt82Status This object specifies status of DHCP option 82 of the profile. A value of 'true' indicates that DHCP option 82 is enabled. A value of 'false' indicates that DHCP option 82 is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.4.1.2
clGatewayProfileDhcpOpt82Format This object specifies binary or ASCII format of the DHCP data.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.4.1.3
clGatewayProfileDhcpOpt82Delimiter This object specifies delimiter between the attributes of DHCP option.	OctetStringr/w	.1.3.6.1.4.1.9.9.848.3.4.1.4
clGatewayProfileCircuitId This object specifies of circuit-id attributes per profile. Maximum circuit-id per profile supported is 5.	OctetStringr/w	.1.3.6.1.4.1.9.9.848.3.4.1.5
clGatewayProfileRemoteId This object specifies of remote-id attributes per profile. Maximum remote-id per profile supported is 5.	OctetStringr/w	.1.3.6.1.4.1.9.9.848.3.4.1.6
clGatewayProfileRadiusProxyStatus This object specifies status of gateway radius proxy of the profile. A value of 'true' indicates that radius proxy is enabled. A value of 'false' indicates that radius proxy is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.4.1.7
clGatewayProfileRadiusProxyAccounting This object specifies status of gateway radius proxy accounting of the profile. A value of 'true' indicates that accounting is enabled on radius proxy. A value of 'false' indicates that accounting is disabled on radius …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.4.1.8
clGatewayProfileRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.3.4.1.9
clGatewayProfileAdminStatus This is the admin status of tunnel profile.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.848.3.4.1.10
clGatewayProfileAAAOverride This object specifies the status of AAA-override. A value of 'true' indicates that AAA-override is enabled. A value of 'false' indicates that AAA-override is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.4.1.11

This table contains the list of rules created. Rules are
attached to the profile.

clGatewayRuleEntry row .1.3.6.1.4.1.9.9.848.3.5.1

Each entry represents a conceptual row in this table.
For each rule a row will be created.

Indexes

clGatewayProfileName clGatewayRuleName

Column	Syntax	OID
clGatewayRuleName This object represents name of the gateway rule, which is applied to profile.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.9.9.848.3.5.1.1
clGatewayRuleTunnelType This object specifies type of the gateway tunnel. none - The tunnel is of type unknown. pmipv6 - The tunnel is of type PMIPV6. gtpv2 - The tunnel is of type GTPV2. eogre - The tunnel is of type EoGRE.	Enumerationr/w Enumerated Values: 1 none 2 pmipv6 3 gtpv2 4 eogre	.1.3.6.1.4.1.9.9.848.3.5.1.2
clGatewayRuleVlanId This object specifies vlan attached to rule.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.5.1.3
clGatewayRuleDomainName This object specifies domain attached to the rule.	OctetStringr/w	.1.3.6.1.4.1.9.9.848.3.5.1.4
clGatewayRuleRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.3.5.1.5
clGatewayRuleRealm This objects represents the pattern used to match client reams, in order to classify them.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.848.3.5.1.6

This table contains the list of tunnel gateways on flexconnect
AP.

clApGatewayTunnelEntry row .1.3.6.1.4.1.9.9.848.3.6.1

Each entry represents a conceptual row in this table.
For each tunnel created to the gateway per flexconnect AP,
there will be a row.

Indexes

CISCO-LWAPP-AP-MIBcLApIfMacAddress clGatewayTunnelName

Column	Syntax	OID
clApGatewayTunnelStatus This object represents the tunnel status of the flexconnect AP. A value of 'true' indicates that tunnel is enabled. A value of 'false' indicates that tunnel is disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.3.6.1.1
clApGatewayTunnelClientCount This object represents the total client count per gateway in flexconnect AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.6.1.2
clApGatewayTunnelMtu This object represents the MTU of the gateway in flexconnect AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.6.1.3
clApGatewayTunnelFlapCount This object represents the number of time the gateway tunnel is flapped in flexconnect AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.6.1.4

This table contains the list of domains created on AP which
contains gateways. Maximum gateways in domain is 2. At anytime
only one gateway is active in the domain.

clApGatewayDomainEntry row .1.3.6.1.4.1.9.9.848.3.7.1

Each entry represents a conceptual row in this table.
For each domain created will be a row.

Indexes

CISCO-LWAPP-AP-MIBcLApIfMacAddress clGatewayDomainName

Column	Syntax	OID
clApGatewayDomainActiveGateway This object represents name of the active gateway in the domain.	OctetString	.1.3.6.1.4.1.9.9.848.3.7.1.1

This table contains the list of tunnel gateways statistics.
Statistics include per gateway informations like gateway
up time, gateway heartbeat information and total number of
clients connected to the gateway.

clGatewayTunnelStatsEntry row .1.3.6.1.4.1.9.9.848.3.8.1

Each entry represents a conceptual row in this table.
For each tunnel created to the gateway, there will be a row.

Indexes

clGatewayTunnelName clGatewayTunnelType

Column	Syntax	OID
clGatewayTunnelStatsClientCount This object represents total number of clients connected to the gateway tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.8.1.1
clGatewayTunnelStatsTunnelUpTime This object represents up time of gateway in seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.8.1.2
clGatewayTunnelStatsKeepaliveLoss This object represents the number of keep alive message lost per gateway.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.8.1.3
clGatewayTunnelStatsTunnelRxBytes This object represents the total number of bytes received per gateway.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.8.1.4
clGatewayTunnelStatsTunnelTxBytes This object represents the total number of bytes transmitted per gateway.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.8.1.5
clGatewayTunnelStatsTunnelRxPkts This object represents the total number of packets received per gateway.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.8.1.6
clGatewayTunnelStatsTunnelTxPkts This object represents the total number of packets transmitted per gateway.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.8.1.7

This table contains the list of AP tunnel gateways
statistics.

clApGatewayTunnelStatsEntry row .1.3.6.1.4.1.9.9.848.3.9.1

Each entry represents a conceptual row in this table.
For each tunnel created to the gateway,
there will be a row.

Indexes

CISCO-LWAPP-AP-MIBcLApIfMacAddress clGatewayTunnelName

Column	Syntax	OID
clApGatewayTunnelStatsTunnelUpTime This object represents up time of gateway in seconds of flexconnect AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.1
clApGatewayTunnelStatsKeepaliveLoss This object represents the number of keep alive message lost per gateway in flexconnect AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.2
clApGatewayTunnelStatsTunnelRxBytesdeprecated This object represents the total number of bytes received per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelRxBytes object is superseded by clApGatewayTunnelStatsTunnelRxBytes64.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.3
clApGatewayTunnelStatsTunnelTxBytesdeprecated This object represents the total number of bytes transmitted per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelTxBytes object is superseded by clApGatewayTunnelStatsTunnelTxBytes64.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.4
clApGatewayTunnelStatsTunnelRxPktsdeprecated This object represents the total number of packets received per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelRxPkts object is superseded by clApGatewayTunnelStatsTunnelRxPkts64.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.5
clApGatewayTunnelStatsTunnelTxPktsdeprecated This object represents the total number of packets transmitted per gateway in flexconnect AP. clApGatewayTunnelStatsTunnelTxPkts object is superseded by clApGatewayTunnelStatsTunnelTxPkts64.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.3.9.1.6
clApGatewayTunnelStatsTunnelRxBytes64 This object represents the total number of bytes received per gateway in flexconnect AP.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.9.1.7
clApGatewayTunnelStatsTunnelTxBytes64 This object represents the total number of bytes transmitted per gateway in flexconnect AP.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.9.1.8
clApGatewayTunnelStatsTunnelRxPkts64 This object represents the total number of packets received per gateway in flexconnect AP.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.9.1.9
clApGatewayTunnelStatsTunnelTxPkts64 This object represents the total number of packets transmitted per gateway in flexconnect AP.	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.848.3.9.1.10

This table represents the information about Gateway related
config on a WLAN.

cLGatewayWlanConfigEntry row .1.3.6.1.4.1.9.9.848.7.1.1

Each entry in this table represents the configuration
attributes of Gateway on a WLAN.

Indexes

CISCO-LWAPP-WLAN-MIBcLWlanIndex

Column	Syntax	OID
cLGatewayWlanVlanOverrideEnable This object specifies the EoGRE Vlan Override status of a WLAN. A value of 'true' indicates that EoGRE Vlan Override is enabled on a WLAN. A value of 'false' indicates that EoGRE Vlan Override is disabled on a WLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.848.7.1.1.1
cLGatewayWlanVlanId This object specifies the Vlan ID of the Vlan in which client traffic needs to be carried.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.848.7.1.1.2

This table represents the information about Gateway Tunnel
profile mapping config on a WLAN policy profile. A row will
exist in this table for each WLAN policy profile that has a
tunnel profile configured

cLGatewayWlanProfileConfigEntry row .1.3.6.1.4.1.9.9.848.8.1.1

Each entry in this table represents the configuration
attributes of Gateway Tunnel Profile on a WLAN policy
profile.

Indexes

CISCO-LWAPP-WLAN-POLICY-MIBcLWlanWlanPolicyName

Column	Syntax	OID
cLGatewayWlanProfileTunnelProfile This object specifies the Tunnel Profile to enable on the WLAN policy profile.	OctetStringr/w	.1.3.6.1.4.1.9.9.848.8.1.1.1

This table represents the configuration details for AAA
proxy server on Tunnel Gateway. A row will exist in this
table for each Tunnel Gateway that behaves as AAA proxy.

cLGatewayAAAProxyConfigEntry row .1.3.6.1.4.1.9.9.848.9.1.1

Each entry in this table represents the configuration
attributes of Tunnel Gateway AAA Proxy.

Indexes

clGatewayTunnelName

Column	Syntax	OID
cLGatewayAAAProxyKey This object specifies the AAA Key for the server on the Tunnel Gateway.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.848.9.1.1.1
cLGatewayAAAProxyRowStatus This is the status column for this row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.848.9.1.1.2
cLGatewayAAAProxyKeyType This object specifies the AAA Key Type for the server on the Tunnel Gateway.	Enumerationr/w Enumerated Values: 1 clear 2 aes	.1.3.6.1.4.1.9.9.848.9.1.1.3
cLGatewayAAAProxyPort This object specifies the TCP/UDP port number for the AAA server on the Tunnel Gateway.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.848.9.1.1.4