CISCO-LWAPP-TUNNEL-MIB

        This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
        
This MIB provides configuration and status information
about local mobility anchor to which the controller has
the joined.
        
The relationship between CC and the LWAPP APs
can be depicted as follows:
        
+......+     +......+     +......+           +......+
+      +     +      +     +      +           +      +
+  LMA +     + LMA  +     + LMA  +           + LMA  +
+      +     +      +     +      +           +      +
+......+     +......+     +......+           +......+
..            .             .                 .
..            .             .                 .
.  .            .             .                 .
.    .            .             .                 .
.      .            .             .                 .
.        .            .             .                 .
+......+ +......+     +......+      +......+          +......+
+      + +      +     +      +      +      +          +      +
+  WLC + + WLC  +     + WLC  +      + WLC  +          + WLC  +
+      + +      +     +      +      +      +          +      +
+......+ +......+     +......+      +......+          +......+
.              .             .                 .
.  .              .             .                 .
.    .              .             .                 .
.      .              .             .                 .
.        .              .             .                 .
+......+ +......+     +......+      +......+          +......+
+      + +      +     +      +      +      +          +      +
+  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
+      + +      +     +      +      +      +          +      +
+......+ +......+     +......+      +......+          +......+
.              .             .                 .
.  .              .             .                 .
.    .              .             .                 .
.      .              .             .                 .
.        .              .             .                 .
+......+ +......+     +......+      +......+          +......+
+      + +      +     +      +      +      +          +      +
+  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
+      + +      +     +      +      +      +          +      +
+......+ +......+     +......+      +......+          +......+
        
        
The LWAPP tunnel exists between the controller and
the APs.  The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
        
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
        
                   GLOSSARY
        
Access Point ( AP )
        
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
        
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
        
Central Controller ( CC )
        
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs.  Throughout this MIB,
this entity also referred to as 'controller'.
        
Light Weight Access Point Protocol ( LWAPP )
        
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
        
Mobile Node ( MN )
        
A roaming 802.11 wireless device in a wireless
network associated with an access point.
        
Gateway
        
Service provider node which assigns IP and maintains the
tunneled clients.
        
Tunnel
        
Connection from Wireless LAN controller to the Gateway.
Tunnel establishment from WLC and TGW(Tunnel Gateway),
in case of Flex-AP, tunnel establishment between
AP and TGW.
        
        
REFERENCE
        
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
        
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
    
Source file
CISCO-LWAPP-TUNNEL-MIB
Last revised
Identity
ciscoLwappTunnelMIB
Base OID
1.3.6.1.4.1.9.9.848
Imported Objects
CISCO-LWAPP-AP-MIB cLApIfMacAddress
CISCO-LWAPP-WLAN-MIB cLWlanIndex (no object page)
CISCO-LWAPP-WLAN-POLICY-MIB cLWlanWlanPolicyName
CISCO-SMI ciscoMgmt
CISCO-TC Unsigned64
INET-ADDRESS-MIB InetAddress InetAddressType
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-LWAPP-TUNNEL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-LWAPP-TUNNEL-MIB::ciscoLwappTunnelMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-TUNNEL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-TUNNEL-MIB::ciscoLwappTunnelMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (119)
.1.3.6.1.4.1.9.9.848
.1.3.6.1.4.1.9.9.848.0
.1.3.6.1.4.1.9.9.848.1
Enumeration
.1.3.6.1.4.1.9.9.848.1.1
.1.3.6.1.4.1.9.9.848.1.10
.1.3.6.1.4.1.9.9.848.1.11
.1.3.6.1.4.1.9.9.848.1.12
.1.3.6.1.4.1.9.9.848.1.13
Enumeration
.1.3.6.1.4.1.9.9.848.1.14
.1.3.6.1.4.1.9.9.848.1.2
.1.3.6.1.4.1.9.9.848.1.3
.1.3.6.1.4.1.9.9.848.1.4
Enumeration
.1.3.6.1.4.1.9.9.848.1.5
.1.3.6.1.4.1.9.9.848.1.6
.1.3.6.1.4.1.9.9.848.1.7
.1.3.6.1.4.1.9.9.848.1.8
.1.3.6.1.4.1.9.9.848.1.9
.1.3.6.1.4.1.9.9.848.2
.1.3.6.1.4.1.9.9.848.2.1
.1.3.6.1.4.1.9.9.848.2.2
.1.3.6.1.4.1.9.9.848.3
.1.3.6.1.4.1.9.9.848.3.1
.1.3.6.1.4.1.9.9.848.3.1.1
OctetString
.1.3.6.1.4.1.9.9.848.3.1.1.1
.1.3.6.1.4.1.9.9.848.3.1.1.10
Enumeration
.1.3.6.1.4.1.9.9.848.3.1.1.2
.1.3.6.1.4.1.9.9.848.3.1.1.3
.1.3.6.1.4.1.9.9.848.3.1.1.4
.1.3.6.1.4.1.9.9.848.3.1.1.5
.1.3.6.1.4.1.9.9.848.3.1.1.6
.1.3.6.1.4.1.9.9.848.3.1.1.7
.1.3.6.1.4.1.9.9.848.3.1.1.8
.1.3.6.1.4.1.9.9.848.3.1.1.9
.1.3.6.1.4.1.9.9.848.3.2
.1.3.6.1.4.1.9.9.848.3.2.1
OctetString
.1.3.6.1.4.1.9.9.848.3.2.1.1
Enumeration
.1.3.6.1.4.1.9.9.848.3.2.1.2
OctetString
.1.3.6.1.4.1.9.9.848.3.2.1.3
OctetString
.1.3.6.1.4.1.9.9.848.3.2.1.4
OctetString
.1.3.6.1.4.1.9.9.848.3.2.1.5
.1.3.6.1.4.1.9.9.848.3.2.1.6
Enumeration
.1.3.6.1.4.1.9.9.848.3.2.1.7
Enumeration
.1.3.6.1.4.1.9.9.848.3.2.1.8
.1.3.6.1.4.1.9.9.848.3.3
.1.3.6.1.4.1.9.9.848.3.3.1
.1.3.6.1.4.1.9.9.848.3.3.1.1
.1.3.6.1.4.1.9.9.848.3.4
.1.3.6.1.4.1.9.9.848.3.4.1
OctetString
.1.3.6.1.4.1.9.9.848.3.4.1.1
Enumeration
.1.3.6.1.4.1.9.9.848.3.4.1.10
.1.3.6.1.4.1.9.9.848.3.4.1.11
.1.3.6.1.4.1.9.9.848.3.4.1.2
.1.3.6.1.4.1.9.9.848.3.4.1.3
OctetString
.1.3.6.1.4.1.9.9.848.3.4.1.4
OctetString
.1.3.6.1.4.1.9.9.848.3.4.1.5
OctetString
.1.3.6.1.4.1.9.9.848.3.4.1.6
.1.3.6.1.4.1.9.9.848.3.4.1.7
.1.3.6.1.4.1.9.9.848.3.4.1.8
.1.3.6.1.4.1.9.9.848.3.4.1.9
.1.3.6.1.4.1.9.9.848.3.5
.1.3.6.1.4.1.9.9.848.3.5.1
OctetString
.1.3.6.1.4.1.9.9.848.3.5.1.1
Enumeration
.1.3.6.1.4.1.9.9.848.3.5.1.2
.1.3.6.1.4.1.9.9.848.3.5.1.3
OctetString
.1.3.6.1.4.1.9.9.848.3.5.1.4
.1.3.6.1.4.1.9.9.848.3.5.1.5
.1.3.6.1.4.1.9.9.848.3.5.1.6
.1.3.6.1.4.1.9.9.848.3.6
.1.3.6.1.4.1.9.9.848.3.6.1
.1.3.6.1.4.1.9.9.848.3.6.1.1
.1.3.6.1.4.1.9.9.848.3.6.1.2
.1.3.6.1.4.1.9.9.848.3.6.1.3
.1.3.6.1.4.1.9.9.848.3.6.1.4
.1.3.6.1.4.1.9.9.848.3.7
.1.3.6.1.4.1.9.9.848.3.7.1
OctetString
.1.3.6.1.4.1.9.9.848.3.7.1.1
.1.3.6.1.4.1.9.9.848.3.8
.1.3.6.1.4.1.9.9.848.3.8.1
.1.3.6.1.4.1.9.9.848.3.8.1.1
.1.3.6.1.4.1.9.9.848.3.8.1.2
.1.3.6.1.4.1.9.9.848.3.8.1.3
.1.3.6.1.4.1.9.9.848.3.8.1.4
.1.3.6.1.4.1.9.9.848.3.8.1.5
.1.3.6.1.4.1.9.9.848.3.8.1.6
.1.3.6.1.4.1.9.9.848.3.8.1.7
.1.3.6.1.4.1.9.9.848.3.9
.1.3.6.1.4.1.9.9.848.3.9.1
.1.3.6.1.4.1.9.9.848.3.9.1.1
.1.3.6.1.4.1.9.9.848.3.9.1.10
.1.3.6.1.4.1.9.9.848.3.9.1.2
.1.3.6.1.4.1.9.9.848.3.9.1.3
.1.3.6.1.4.1.9.9.848.3.9.1.4
.1.3.6.1.4.1.9.9.848.3.9.1.5
.1.3.6.1.4.1.9.9.848.3.9.1.6
.1.3.6.1.4.1.9.9.848.3.9.1.7
.1.3.6.1.4.1.9.9.848.3.9.1.8
.1.3.6.1.4.1.9.9.848.3.9.1.9
.1.3.6.1.4.1.9.9.848.4
OctetString
.1.3.6.1.4.1.9.9.848.4.1
.1.3.6.1.4.1.9.9.848.5
.1.3.6.1.4.1.9.9.848.5.1
.1.3.6.1.4.1.9.9.848.6
.1.3.6.1.4.1.9.9.848.6.1
.1.3.6.1.4.1.9.9.848.7
.1.3.6.1.4.1.9.9.848.7.1
.1.3.6.1.4.1.9.9.848.7.1.1
.1.3.6.1.4.1.9.9.848.7.1.1.1
.1.3.6.1.4.1.9.9.848.7.1.1.2
.1.3.6.1.4.1.9.9.848.8
.1.3.6.1.4.1.9.9.848.8.1
.1.3.6.1.4.1.9.9.848.8.1.1
OctetString
.1.3.6.1.4.1.9.9.848.8.1.1.1
.1.3.6.1.4.1.9.9.848.9
.1.3.6.1.4.1.9.9.848.9.1
.1.3.6.1.4.1.9.9.848.9.1.1
.1.3.6.1.4.1.9.9.848.9.1.1.1
.1.3.6.1.4.1.9.9.848.9.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.848.9.1.1.3
Unsigned32
.1.3.6.1.4.1.9.9.848.9.1.1.4
Dependencies (17) 10 direct · 7 transitive 1 circular Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Circular imports detected
CISCO-LWAPP-AP-MIB → CISCO-LWAPP-DOT11-MIB → CISCO-LWAPP-AP-MIB
Dependency tree
Conformance Groups (10)
This is a collection of objects which can
be configured to control Tunnel parameters.
.1.3.6.1.4.1.9.9.848.2.2.1
This is a collection of notifications about the
Tunnels behavior on controller
.1.3.6.1.4.1.9.9.848.2.2.2
This is a collection of notifications groups thats
about tunnels behaviors on controller
.1.3.6.1.4.1.9.9.848.2.2.3
This is a collection of objects which can
be configured to control Tunnel parameters.
.1.3.6.1.4.1.9.9.848.2.2.4
This is a collection of objects which can
be configured to control WLAN parameters of a gateway.
.1.3.6.1.4.1.9.9.848.2.2.5
This is a collection of objects which can
be configured to control Tunnel parameters.
.1.3.6.1.4.1.9.9.848.2.2.6
This is a collection of objects which can be
configured to control WLAN policy parameters
of a gateway.
.1.3.6.1.4.1.9.9.848.2.2.7
This is a collection of objects which can be read
to obtain statistics of a gateway on an access point.
.1.3.6.1.4.1.9.9.848.2.2.8
This is a collection of objects which can be
defined to control AAA proxy configuration
of a gateway.
.1.3.6.1.4.1.9.9.848.2.2.9
This is a collection of objects which can
be configured to control Tunnel parameters.
.1.3.6.1.4.1.9.9.848.2.2.10
Compliance Statements (6)

OID .1.3.6.1.4.1.9.9.848.2.1.1
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups

OID .1.3.6.1.4.1.9.9.848.2.1.2
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups

OID .1.3.6.1.4.1.9.9.848.2.1.3
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups

OID .1.3.6.1.4.1.9.9.848.2.1.4
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups

OID .1.3.6.1.4.1.9.9.848.2.1.5
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups

OID .1.3.6.1.4.1.9.9.848.2.1.6
The compliance statement for the SNMP entities that
implement the ciscoLwappTunnelMIB module.
Required groups
Notifications / Traps (3)