CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
44

cldccDiagDhcpTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagDhcpTestReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagDhcpTestReqTable' 
This table contains request params for dhcp test to
be performed by the client.
cldccDiagDhcpTestReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.1.1
There is an entry in the table identified by the
client mac address.
Indexes
Column Syntax OID
cldccDiagDhcpTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row status
will be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.1.1.1

cldccDiagPingTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagPingTestReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagPingTestReqTable' 
This table contains the parameters for DNS ping test
request.
cldccDiagPingTestReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1
There is an entry in the table where each entry is identified
by the client mac address.
Indexes
Column Syntax OID
cldccDiagPingTestType
This field is used to distinguish the type of
test.It can be a ping to the dns server or the
default gateway.
Enumerationr/w
Enumerated Values:
1dns-server
2default-gw
 .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.1
cldccDiagPingTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row status
will be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.2

cldccDiagDnsNameResolTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagDnsNameResolTestReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagDnsNameResolTestReqTable' 
This table contains Dns Name resolution request 
params to be used for sending out a Diagnostic
request to a client for resolving a network name.
cldccDiagDnsNameResolTestReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1
There is an entry in the table where each entry
is identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagDnsNameResolTestReqNetworkName
This is the name of the network which will be
resolved by the client and the result reported
to the controller.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.1
cldccDiagDnsNameResolTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row
status will be used.To remove a row, this field
will be set to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.2

cldccDiagAssociationTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagAssociationTestReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestReqTable' 
This table contains association test request values
for various clients.
cldccDiagAssociationTestReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagAssocTestReqBssid
This is the bssid of the AP which the client
has to try connecting to as a part of association
test.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.1
cldccDiagAssocTestReqSsid
This is the name of the SSID which the client has
to try connecting to as a part of association test.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.2
cldccDiagAssocTestReqChannel
This is channel number on which the client will
try to connect to the AP.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.3
cldccDiagAssocTestReqBand
This is band on which the client will
try to connect to the AP.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.4
cldccDiagAssocTestReqPhyType
This is phy type.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.5
cldccDiagAssocTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row
status will be used.To remove a row, this field
will be set to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.6

cldccDiagAuthenticationTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagAuthenticationTestReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAuthenticationTestReqTable' 
This table contains association test request values
for various clients.
cldccDiagAuthenticationTestReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagAuthenticationTestReqBssid
This is the name of the AP which the client has to try
connecting to as a part of authentication test.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.1
cldccDiagAuthenticationTestReqProfileId
This is the name of the ProfileId which the client has to try
connecting to as a part of authentication test.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.2
cldccDiagAuthenticationTestReqChannel
This attribute represents the channel number.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.3
cldccDiagAuthenticationTestReqBand
This attribute represents the band.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.5
cldccDiagAuthenticationTestReqPhyType
This attribute represents the phy type.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.6
cldccDiagAuthenticationTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table,createAndGo row
status will be used.To remove a row, this field will
be set to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.9

cldccDiagMsgDisplayReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagMsgDisplayReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagMsgDisplayReqTable' 
This table contains message display request values for
various clients.
cldccDiagMsgDisplayReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagMsgDisplayMsgType
This attribute represents the type of message
to be displayed.
Enumerationr/w
Enumerated Values:
1invalid-ssid
2invalid-network-settings
3wlan-capability-mismatch
4bad-credentials
5call-support
6problem-resolved
7resolution-incomplete
8try-again-later
9user-action-required
10trouble-shooting-refused-by-network
11retrieving-client-reports
12retrieving-client-logs
13retrieval-complete
14begining-association-test
15begining-dhcp-test
16begining-network-connectivity-test
17begining-dns-ping-test
18begining-name-resolution-test
19begining-dot1x-test
20redirecting-client-to-a-profile
21test-complete
22test-passed
23test-failed
24cancel-diag-channel-operation
25log-retrieval-refused
26client-report-retrieval-refused
27test-request-refused-by-client
28invalid-network-address
29known-problem-with-network
30scheduled-maint-period
31wlan-security-incorrect
32waln-encryption-incorrect
33wlan-auth-incorrect
 .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.1
cldccDiagMsgDisplayReqRowStatus
This field is used to add/remove entries from this table.
To add a row in this table, createAndGo row status will
be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.2

cldccDiagProfileRedirectReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.7 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagProfileRedirectReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagProfileRedirectReqTable' 
This table contains profile redirect request values for
various clients.
cldccDiagProfileRedirectReqEntry row .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagProfileRedirectReqProfileId
This attribute represents the profile Id
to which the client should be redirected.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.1
cldccDiagProfileRedirectReqRowStatus
This field is used to add/remove entries from this table.
To add a row in this table, createAndGo row status will
be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.2

cldccDiagDhcpTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagDhcpTestRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagDhcpTestRespTable' 
This table contains response for dhcp 
test performed by the client.
cldccDiagDhcpTestRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.1.1
There is an entry in the table
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagDhcpTestRespDhcpOffer
This field will have the complete set
of DHCP options returned in the DHCP Offer.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.1.1.1

cldccDiagPingTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagPingTestRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagPingTestRespTable' 
This table contains response for Dns ping test 
request.
cldccDiagPingTestRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2
There is an entry in the table where each entry is
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagPingTestRespIPAddressType
The value of this field shall be the IP address
type of the destination of the ICMP echo
request frames.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.1
cldccDiagPingTestRespIPAddress
The value of this field shall be the IP address
of the destination of the ICMP Echo Request
frames.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.2
cldccDiagPingTestRespDestMacAddress
The value of this field shall be the MAC address
of the destination of the ICMP Echo Request
frames.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.3
cldccDiagPingTestRespPingsSent
The value of this field shall be the number
of ICMP Echo Request frames sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.4
cldccDiagPingTestRespPingsReceived
The value of this field shall be the number of
ICMP Echo Response frames received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.5
cldccDiagPingTestRespMinEchoTIme
The value of this field shall be the shortest time,in
milliseconds, between the transmission of an ICMP echo
request frame and the receipt of the corresponding ICMP
Echo Response frame.
CISCO-TCCiscoMilliSeconds .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.6
cldccDiagPingTestRespMaxEchoTIme
The value of this field shall be the longest time
in milliseconds,between the transmission of an ICMP
echo Request between the transmission of an ICMP echo
request frame and the receipt of the corresponding
ICMP echo r…
CISCO-TCCiscoMilliSeconds .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.7

cldccDiagDnsNameResolTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagDnsNameResolTestRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagDnsNameResolTestRespTable' 
This table contains Dns Name Resolution test results
sent by the client to the controller.
cldccDiagDnsNameResolTestRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1
There is an entry in the table where each entry is
identified by a client mac address.
Indexes
Column Syntax OID
cldccDiagDnsNameResolTestRespIpAddressType
This is type of the ip address of the
DNS server whose name was sent in the
request.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.1
cldccDiagDnsNameResolTestRespIpAddress
This is the ip address of the DNS server
whose name was sent in the request.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.2
cldccDiagDnsNameResolTestRespServerName
This is the name of the server whose
ip address was resolved.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.3

cldccDiagAssociationTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagAssociationTestRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestRespTable' 
This table contains association test
response values for various clients.
cldccDiagAssociationTestRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagAssociationTestRespIsAssocComplete
Value of this field shall be 1 if the 802.11
association concluded normally,0 otherwise.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1
cldccDiagAssocTestRespReturnedStatus
Value of this field shall be the value returned
in the final 802.11 association response frame
during the test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2

cldccDiagAuthenticationTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagAuthenticationTestRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAuthenticationTestRespTable' 
This table contains authentication test response 
values for various clients.
cldccDiagAuthenticationTestRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagAuthenticationTestRespIsCompleted
Value of this field shall be 1 if the 802.11
association concluded normally,0 otherwise.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.1
cldccDiagAuthenticationTestRespReturnedStatus
Value of this field shall be the value returned in
the final 802.11 authentication response frame
during the test
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.2
cldccDiagAuthenticationTestRespEAPMethod
Value of this field shall be the EAP method returned
in the final 802.11 authentication response frame
during the test.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.3

cldccDiagMsgDisplayRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.6 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagMsgDisplayRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagMsgDisplayRespTable' 
This table contains message display request values
for various clients.
cldccDiagMsgDisplayRespEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.6.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagMsgDisplayRespString
This is string which was sent to the client for display.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.6.1.1

cldccDiagTestLoggedFrameTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.8 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagTestLoggedFrameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagTestLoggedFrameTable' 
This table contains logged frame data.
cldccDiagTestLoggedFrameEntry row .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1
There is an entry in the table where each entry
is identified by the client mac address.
Indexes
Column Syntax OID
cldccDiagTestLoggedFrameIndex
The value of this field shall be the ordinal
value of the logged frame.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.1
cldccDiagTestLoggedFrameDirection
The value of this field shall be zero,
when the logged frame in the Frame Content field
is sent from (transmitted by) the client.
It shall be one, otherwise.
Enumeration
Enumerated Values:
0up
1down
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.2
cldccDiagTestLoggedFrameTimeStamp
The value of this field shall be the
timestamp value of the logged frame.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.3
cldccDiagTestLoggedFrameData
The value of this field shall be the actual
frame that was transmitted or received.
OctetString
Constraints:
range: 1-4096
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.4

cldccDiagTestStatusTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccDiagTestStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagTestStatusTable' 
This table contains the status params for 
all the tests performed on the client.
cldccDiagTestStatusEntry row .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1
There is an entry in the table identified by the
client mac address.
Indexes
Column Syntax OID
cldccDiagTestLastTestStatus
This field is used to represent the status of the
last test performed.
CiscoLwappCcxDiagTestStatus
Type Values:
0successful
1pending
3timeout
4stopped
5mismatch
 .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.1
cldccDiagTestLastResponseStatus
This field is used to represent the response of the
last test performed.
CiscoLwappCcxDiagResponseStatus
Type Values:
0successful
1fail
3refused
4incapable
5unknown
 .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.2