CISCO-LWAPP-CDP-MIB Table View

This table contains the cached neighbor
information obtained via receiving CDP messages on APs.
Entries are added to this table when a CDP advertisement
is received from a neighboring device. Entries get deleted
when CDP is disabled on the interface or globally.

clcCdpApCacheEntry row .1.3.6.1.4.1.9.9.623.1.3.1.1

An entry in the clcCdpApCacheTable,
containing the information received via CDP on one
interface from one device. Entries appear when
a CDP advertisement is received from a neighbor
device. Entries disappear when CDP …

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress clcCdpApCacheDeviceIndex

Column	Syntax	OID
clcCdpApCacheDeviceIndex This object represents a unique value for each device from which CDP messages are being received.	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.623.1.3.1.1.1
clcCdpApCacheApName This object represents the name assigned to this AP. If an AP is not configured its factory default name will be ap:<last three byte of MACAddress>. Eg. ap:af:12:be	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.2
clcCdpApCacheApAddressType This object represents the type of address contained in the corresponding instance of clcCdpApCacheAddress for the AP.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.623.1.3.1.1.3
clcCdpApCacheApAddress This object represents the IP address of the AP.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.4
clcCdpApCacheLocalInterface This object represents the local port on which LWAPP encapsulated CDP packets were received.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.623.1.3.1.1.5
clcCdpApCacheNeighName This object represents the Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent CDP message.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.6
clcCdpApCacheNeighAddressType This object represents the type of address contained in the corresponding instance of clcCdpApCacheAddress of neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.623.1.3.1.1.7
clcCdpApCacheNeighAddress This object represents the (first) network-layer address of the device's SNMP-agent as reported in the most recent CDP message. For example, if the corresponding instance of clcCdpApCacheApAddressType had the value 'ip…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.8
clcCdpApCacheNeighInterface This object represents the Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.9
clcCdpApCacheNeighVersion This object represents the version string which refers to the software running on neighboring device.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.10
clcCdpApCacheAdvtVersion This object specifies the Cisco Discovery Protocol advertisement version.	CISCO-LWAPP-TC-MIBCLCdpAdvtVersionTyper/w Type Values: 1 cdpv1 2 cdpv2	.1.3.6.1.4.1.9.9.623.1.3.1.1.11
clcCdpApCachePlatform This object represents the device's hardware platform as reported in the most recent CDP message. The zero-length string indicates that no platform field(TLV) was reported in the most recent CDP message.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.623.1.3.1.1.12
clcCdpApCacheCapabilities This object represents the device's functional capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest version of the CDP specification. The zero-length string indicat…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.9.9.623.1.3.1.1.13
clcCdpApCacheHoldtimeLeft This object represents the time left in seconds before the CDP neighbor entry gets aged-out.	secondsUnsigned32 Constraints: range: 10-255	.1.3.6.1.4.1.9.9.623.1.3.1.1.14
clcCdpApCacheDuplex This object represents the duplex mode of the ethernet interface between the AP and it's neighboring CDP device, as reported in the most recent CDP message. unknown(1) - indicates no duplex mode field (TLV) was repo…	Enumeration Enumerated Values: 1 unknown 2 fullduplex 3 halfduplex 4 auto	.1.3.6.1.4.1.9.9.623.1.3.1.1.15
clcCdpApCacheInterfaceSpeed This object represents the speed of the ethernet interface between the AP and it's neighboring CDP device. The unit is Mbps. This variable would be populated at AP join and periodically thereafter. none(1)- would be s…	MbpsEnumeration Enumerated Values: 1 none 2 tenMbps 3 hundredMbps 4 thousandMbps 5 auto	.1.3.6.1.4.1.9.9.623.1.3.1.1.16

The (conceptual) table contains the list of
network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently
received CDP message. The first address included in
the Address TLV is saved in cdpCacheAddress. This
table contains the remainder of the addresses in the
Address TLV.

clcCdpCtAddressEntry row .1.3.6.1.4.1.9.9.623.1.3.2.1

An entry (conceptual row) in the clcCdpCtAddressTable,
containing the information on one address received via CDP
on one interface from one device. Entries appear
when a CDP advertisement is received from a neighbor
de…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress clcCdpApCacheDeviceIndex clcCdpCtAddressIndex

Column	Syntax	OID
clcCdpCtAddressIndex This object indicates the index of the address entry for a given cLApSysMacAddress,cdpCacheDeviceIndex pair. It has the value N-1 for the N-th address in the Address TLV.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.623.1.3.2.1.1
clcCdpCtAddressType This object represents the type of address contained in the corresponding instance of clcCdpCtAddress.	CISCO-TCCiscoNetworkProtocol Type Values: 1 ip 2 decnet 3 pup 4 chaos 5 xns 6 x121 7 appletalk 8 clns 9 lat 10 vines 11 cons 12 apollo 13 stun 14 novell 15 qllc 16 snapshot 17 atmIlmi 18 bstun 19 x25pvc 20 ipv6 21 cdm 22 nbf 23 bpxIgx 24 clnsPfx 25 http 65535 unknown	.1.3.6.1.4.1.9.9.623.1.3.2.1.2
clcCdpCtAddress This object represents the N-th network-layer address of the device as reported in the most recent CDP message's address TLV, where N-1 is given by the value of clcCdpCtAddressIndex. For example, if the corresponding …	CISCO-TCCiscoNetworkAddress	.1.3.6.1.4.1.9.9.623.1.3.2.1.3

The (conceptual) table contains the status of Cisco
Discovery Protocol on LWAPP Access Points. An entry is 
added to the table when an Aceess Point joins a controller.
An entry is deleted when the Access Point disassociates 
from the controller. This table is used to configure CDP
feature per Access Point.

clcCdpApEntry row .1.3.6.1.4.1.9.9.623.1.4.1.1

An entry (conceptual row) in the clcCdpApTable,
containing the status of CDP on an AP.

Consider a setup where two APs, 'AP1' and 'AP2'
have been connected to a CISCO-3750 switch.
Both the APs register with …

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress

Column	Syntax	OID
clcCdpApCdpEnable This object specifies whether the Cisco Discovery Protocol is currently running on this AP. When set to 'true', that means CDP is enabled on the AP denoted by MAC address cLApSysMacAddress. When set to 'fals…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.623.1.4.1.1.1