CISCO-LWAPP-CDP-MIB
Monitored by Observium This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrieve the status of the
CDP cache information on the various LWAPP access
points.
The CDP MIB is also supported by controller and provides
configuration and status information about CDP neighbors
of the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
central controller.
Cisco Discovery Protocol ( CDP )
Protocol for discovery of neighboring devices.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Discovery
Explore Observium network monitoring
- Source file
CISCO-LWAPP-CDP-MIB- Last revised
- Identity
ciscoLwappCdpMIB- Base OID
1.3.6.1.4.1.9.9.623
Imported Objects
| CISCO-LWAPP-AP-MIB | cLApSysMacAddress |
| CISCO-LWAPP-TC-MIB | CLCdpAdvtVersionType |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoNetworkAddress CiscoNetworkProtocol |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-LWAPP-CDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-LWAPP-CDP-MIB::ciscoLwappCdpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-CDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-CDP-MIB::ciscoLwappCdpMIB'
Objects (44)
7 directly used by Observium
Showing 44 of 44 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.623 |
||
.1.3.6.1.4.1.9.9.623.0 |
||
.1.3.6.1.4.1.9.9.623.1 |
||
.1.3.6.1.4.1.9.9.623.1.1 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.623.1.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.623.1.1.2 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.623.1.1.3 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.623.1.1.4 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.623.1.1.5 |
|
.1.3.6.1.4.1.9.9.623.1.2 |
||
.1.3.6.1.4.1.9.9.623.1.2.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.623.1.2.2 |
|
.1.3.6.1.4.1.9.9.623.1.2.3 |
||
.1.3.6.1.4.1.9.9.623.1.3 |
||
.1.3.6.1.4.1.9.9.623.1.3.1 |
||
|
|
.1.3.6.1.4.1.9.9.623.1.3.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.1 |
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.10 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.11 |
||
|
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.12 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.13 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.14 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.15 |
|
|
MbpsEnumeration
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.16 |
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.2 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.3 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.4 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.5 |
||
|
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.6 |
|
.1.3.6.1.4.1.9.9.623.1.3.1.1.7 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.8 |
||
.1.3.6.1.4.1.9.9.623.1.3.1.1.9 |
||
.1.3.6.1.4.1.9.9.623.1.3.2 |
||
.1.3.6.1.4.1.9.9.623.1.3.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.623.1.3.2.1.1 |
|
.1.3.6.1.4.1.9.9.623.1.3.2.1.2 |
||
.1.3.6.1.4.1.9.9.623.1.3.2.1.3 |
||
.1.3.6.1.4.1.9.9.623.1.4 |
||
.1.3.6.1.4.1.9.9.623.1.4.1 |
||
.1.3.6.1.4.1.9.9.623.1.4.1.1 |
||
.1.3.6.1.4.1.9.9.623.1.4.1.1.1 |
||
.1.3.6.1.4.1.9.9.623.2 |
||
.1.3.6.1.4.1.9.9.623.2.1 |
||
.1.3.6.1.4.1.9.9.623.2.2 |
Dependencies (18) 10 direct · 8 transitive 1 circular Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Circular imports detected
CISCO-LWAPP-AP-MIB → CISCO-LWAPP-DOT11-MIB → CISCO-LWAPP-AP-MIBDependency tree
Suggested compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-LWAPP-TC-MIBcisco
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-LWAPP-DOT11-MIBcisco
- CISCO-TCcisco
- INET-ADDRESS-MIBrfc
- CISCO-LWAPP-WLAN-MIBcisco
- CISCO-LWAPP-RF-MIBcisco
- IANA-ENTITY-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- IANAifType-MIBrfc
- CISCO-LWAPP-AP-MIBcisco
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-LWAPP-CDP-MIBciscoselected
Conformance Groups (3)
|
This is a collection of objects which can configured to
control functional parameters of Cisco Discovery Protocol feature in WLAN controllers and LWAPP APs. |
.1.3.6.1.4.1.9.9.623.2.2.1
|
|
|
clcCdpApCacheApName clcCdpApCacheApAddressType clcCdpApCacheApAddress clcCdpApCacheLocalInterface clcCdpApCacheNeighName clcCdpApCacheNeighAddressType clcCdpApCacheNeighAddress clcCdpApCacheNeighInterface clcCdpApCacheNeighVersion clcCdpApCacheAdvtVersion clcCdpApCachePlatform clcCdpApCacheCapabilities clcCdpApCacheHoldtimeLeft clcCdpInPackets clcCdpOutPackets clcCdpChecksumErrorPackets clcCdpNoMemoryPackets clcCdpInvalidPackets
This collection of objects represents the information
about the general status attributes of Cisco Discovery Protocol in WLAN controllers and LWAPP APs. |
.1.3.6.1.4.1.9.9.623.2.2.2
|
|
|
These are the additional objects which represent
the information about the general status attributes of Cisco Discovery Protocol in WLAN controllers and LWAPP APs. |
.1.3.6.1.4.1.9.9.623.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.623.2.1.1The compliance statement for the SNMP entities that
implement the ciscoLwappCdpMIB module.
implement the ciscoLwappCdpMIB module.
Required groups
| mandatory | clcCdpRev01ConfigGroup | |
| mandatory | clcCdpRev01StatusGroup |
OID
.1.3.6.1.4.1.9.9.623.2.1.2The compliance statement for the SNMP entities that
implement the ciscoLwappCdpMIB module.
implement the ciscoLwappCdpMIB module.
Required groups
| mandatory | clcCdpRev01ConfigGroup | |
| mandatory | clcCdpRev01StatusGroup | |
| mandatory | clcCdpRev02StatusGroup |