CISCO-LWAPP-CCX-RM-MIB Table View

This table represents the CCX related parameters on
the radio interface of the APs.  The values configured
through the objects of this table are passed onto the
AP by the controller, when the AP joins the 
controller. 
          
There exists a row in this table for each conceptual row
in cLApDot11IfTable that represents a dot11 interface
of an AP.

clcrAPIfEntry row .1.3.6.1.4.1.9.9.520.1.3.1.1

Each entry represents a conceptual row in this table.
An entry corresponding to each dot11 interface of an
AP is added to this table when the AP joins the
controller and deleted when AP disassociates from the
controller.

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column	Syntax	OID
clcrAPIfOverrideGlobal This object specifies the Global override option for beacon measurement requests. - A value of 'true' indicates that values populated through clcrAPIfBeaconEnabled and clcrAPIfBeaconInterval are considered for sending …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.520.1.3.1.1.1
clcrAPIfBeaconEnabled This object specifies the option to enable or disable the beacon measurement request info IE. - A value of 'true' indicate that the LWAPP APs broadcast radio measurement request messages that include a beacon measureme…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.520.1.3.1.1.2
clcrAPIfBeaconIntervaldeprecated This object specifies the interval at which the AP sends radio measurement request messages to the clients associated through each and every SSID. clcrAPIfBeaconInterval object is superseded by clcrAPIfBeaconIntvl.	hundredths-secondsInteger32r/w Constraints: range: 6000-3240000	.1.3.6.1.4.1.9.9.520.1.3.1.1.3
clcrAPIfBeaconIntvl This object specifies the interval at which the AP sends radio measurement request messages to the clients associated through each and every SSID.	hundredths-secondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.520.1.3.1.1.4

This table represents the received signal power as seen 
by a wireless client when conducting radio
measurements.  Clients measure the received signal
power by observing the beacon requests and probe
response messages on all the specified channels and
pass them to the APs through beacon reports.
          
An entry is added to the table by the agent when the
beacon report sent by the client arrives at the dot11
interface of an AP.  An existing entry for a client
gets over-written when the subsequent reports arrive
at an AP from that client.  The term 'client' here
refers to all the wireless CCX compliant devices like
mobile stations, tags etc.
          
An entry is deleted from this table when the particular
client dissociates from the AP.  The entry also gets
deleted when the AP dissociates from the controller.

clcrClientBeaconReportEntry row .1.3.6.1.4.1.9.9.520.1.4.1.1

Each entry represents a conceptual row in this table
and populates the received signal power as observed
and reported by the respective client.

Indexes

clcrClientMacAddress CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column	Syntax	OID
clcrClientMacAddress This object represents MAC address of a client that has sent a beacon report to the AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.520.1.4.1.1.1
clcrClientRxPowerSignal This object represents the signal strength of the beacon or probe response frame as seen by the client.	dBmInteger32 Constraints: range: -90-30	.1.3.6.1.4.1.9.9.520.1.4.1.1.2
clcrClientTimeStamp This object represents the value of sysUpTime at which the beacon measurement report was received.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.520.1.4.1.1.3

This table represents the CCX parameters of a
particular WLAN.
          
There exist a row in this table corresponding to each
row representing a WLAN in cLWlanConfigTable.

clcrWlanEntry row .1.3.6.1.4.1.9.9.520.1.5.1.1

Each entry represents a conceptual row in this table
and provides information about the CCX capabilities
of the WLAN.

Indexes

CISCO-LWAPP-WLAN-MIBcLWlanIndex

Column	Syntax	OID
clcrVersionIESupport This object indicates the support for the Cisco Compatible Extensions Version information element on this WLAN. A value of 'true' indicates the presence of the support. A value of 'false' indicates the a…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.520.1.5.1.1.1
clcrAironetIESupport This object indicates the support for the Cisco Compatible Extensions Aironet information element on this WLAN. - A value of 'true' indicates that Cisco Compatible Extensions Aironet information element is supporte…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.520.1.5.1.1.2