CISCO-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
10
.1.3.6.1.4.1.9.9.225.1.2.1 · 1 row entry · 1 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clagAggProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LAG-MIB::clagAggProtocolTable'
A table that contains protocol information about every
interface which supports link aggregation.
clagAggProtocolEntry row .1.3.6.1.4.1.9.9.225.1.2.1.1
Entry containing aggregation protocol type for a
particular interface. An entry is created in this
table when its associated ifEntry is created and that
interface supports link aggregation. The entry of this
table is…
Indexes
Column Syntax OID
The aggregation protocol type for the interface.

On some platforms, aggregation protocol may be assigned per
group. The group can be a collection of the ports which belong
to a module or system. If the …
ClagAggregationProtocolr/w
Type Values:
1lacp
2pagp
.1.3.6.1.4.1.9.9.225.1.2.1.1.1
.1.3.6.1.4.1.9.9.225.1.3.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clagAggPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LAG-MIB::clagAggPortTable'
A table that contains information about every
aggregation port that is associated with this system.
This table contains additional objects for the
dot3adAggPortTable.
clagAggPortEntry row .1.3.6.1.4.1.9.9.225.1.3.1.1
An entry containing additional management information
applicable to a particular aggregation port.
Indexes
No indexes recorded
Column Syntax OID
The administrative status of the LACP protocol on this
aggregation port.
ClagPortAdminStatusr/w
Type Values:
1off
2on
3active
4passive
.1.3.6.1.4.1.9.9.225.1.3.1.1.1
Specifies the requested exchange rate of LACP packets
on this interface.
fast(1) : The device requests its peers to send LACP packets
at fast rate to this interface.
normal(2): The decice requests …
Enumerationr/w
Enumerated Values:
1fast
2normal
.1.3.6.1.4.1.9.9.225.1.3.1.1.2
.1.3.6.1.4.1.9.9.225.1.4.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clagAggPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LAG-MIB::clagAggPortListTable'
This table augments the dot3adAggPortListTable and
provides the complete list of ports associated with
each Aggregator.
clagAggPortListEntry row .1.3.6.1.4.1.9.9.225.1.4.1.1
A list of the ports associated with a given Aggregator.
Indexes
No indexes recorded
Column Syntax OID
This object contains a list of ports currently associated
with this Aggregator in the format of
'[number_of_ports][cieIfDot1dBaseMappingPort1][...]
[cieIfDot1dBaseMappingPortn]'

where
[number_of_ports] i…
OctetString
Constraints:
range: 2-256
.1.3.6.1.4.1.9.9.225.1.4.1.1.1
This object contains a list of ports currently associated
with this Aggregator in the format of CiscoInterfaceIndexList.
CISCO-TCCiscoInterfaceIndexList
Type Constraints:
range: 0..256
.1.3.6.1.4.1.9.9.225.1.4.1.1.2
.1.3.6.1.4.1.9.9.225.1.5.1 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clagAggChannelIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LAG-MIB::clagAggChannelIfTable'
A table providing port channel
configuration information for port channel
interfaces identified by ifIndex.
clagAggChannelIfEntry row .1.3.6.1.4.1.9.9.225.1.5.1.1
An entry containing port channel
configuration information for port
channel interfaces.
Indexes
Column Syntax OID
Specifies whether LACP protocol fast switchover
mode is enabled on this port channel interface
or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.225.1.5.1.1.1
Specifies the maximum number of member
ports that can be bundled on this port
channel interface for LACP protocol.
Unsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.9.9.225.1.5.1.1.2
Specifies the minimum number of bundled member ports that are
needed in order for this port channel interface to be
operational.
A value of zero for this object indicates that no minimum
number of bundled member ports a…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.225.1.5.1.1.3
Specifies the hash distribution method that is administratively
configured on this port channel interface upon its channel
membership transition event.

none(1) : Hash distribution algorithm on thi…
Enumerationr/w
Enumerated Values:
1none
2adaptive
3fixed
.1.3.6.1.4.1.9.9.225.1.5.1.1.4
Specifies the operational hash distribution method
for this port channel interface among the port channel members.

other(1) : None of the following.
adaptive(2) : Adaptive hash distribution fo…
Enumeration
Enumerated Values:
1other
2adaptive
3fixed
.1.3.6.1.4.1.9.9.225.1.5.1.1.5