CISCO-LAG-MIB
Recognized by Observium Cisco Link Aggregation module for managing IEEE Std
802.3ad.
This MIB provides Link Aggregation information that are
either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)
or specific to Cisco products.
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
- Source file
CISCO-LAG-MIB- Last revised
- Identity
ciscoLagMIB- Base OID
1.3.6.1.4.1.9.9.225
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInterfaceIndexList |
| IEEE8023-LAG-MIB | dot3adAggPortEntry dot3adAggPortListEntry |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-LAG-MIB::ciscoLagMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LAG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LAG-MIB::ciscoLagMIB'
Objects (34)
Showing 34 of 34 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.225 |
||
.1.3.6.1.4.1.9.9.225.1 |
||
.1.3.6.1.4.1.9.9.225.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.1.2 |
||
.1.3.6.1.4.1.9.9.225.1.1.3 |
||
.1.3.6.1.4.1.9.9.225.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.225.1.1.5 |
|
.1.3.6.1.4.1.9.9.225.1.2 |
||
.1.3.6.1.4.1.9.9.225.1.2.1 |
||
.1.3.6.1.4.1.9.9.225.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.3 |
||
.1.3.6.1.4.1.9.9.225.1.3.1 |
||
.1.3.6.1.4.1.9.9.225.1.3.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.3.1.1.1 |
||
|
clagAggPortRate
r/w
|
Enumeration
|
.1.3.6.1.4.1.9.9.225.1.3.1.1.2 |
.1.3.6.1.4.1.9.9.225.1.4 |
||
.1.3.6.1.4.1.9.9.225.1.4.1 |
||
.1.3.6.1.4.1.9.9.225.1.4.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.225.1.4.1.1.1 |
|
.1.3.6.1.4.1.9.9.225.1.4.1.1.2 |
||
.1.3.6.1.4.1.9.9.225.1.5 |
||
.1.3.6.1.4.1.9.9.225.1.5.1 |
||
.1.3.6.1.4.1.9.9.225.1.5.1.1 |
||
.1.3.6.1.4.1.9.9.225.1.5.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.225.1.5.1.1.2 |
|
.1.3.6.1.4.1.9.9.225.1.5.1.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.225.1.5.1.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.225.1.5.1.1.5 |
|
.1.3.6.1.4.1.9.9.225.2 |
||
.1.3.6.1.4.1.9.9.225.3 |
||
.1.3.6.1.4.1.9.9.225.3.1 |
||
.1.3.6.1.4.1.9.9.225.3.2 |
Dependencies (20) 7 direct · 13 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8023-LAG-MIBrfc
- CISCO-LAG-MIBciscoselected
Type Definitions (5)
| Enumeration |
lacp(1)pagp(2) |
|
| Enumeration |
source(1)destination(2)both(3) |
|
| Enumeration |
label(1)labelIp(2) |
|
| Enumeration |
ip(1)mac(2)port(3)vlanIpPort(4)vlanIp(5)ipPort(6) |
|
| Enumeration |
off(1)on(2)active(3)passive(4) |
Conformance Groups (12)
|
The object that provide aggregation protocol type of an
interface. These are additional to the IEEE Std 802.3ad MIB. |
.1.3.6.1.4.1.9.9.225.3.2.1
|
|
|
A collection of objects that provide admin status
about an aggregation port. These are additional to the IEEE Std 802.3ad MIB. |
.1.3.6.1.4.1.9.9.225.3.2.2
|
|
|
A collection of objects that provide the load balancing
information for an aggregator. These are additional to the IEEE Std 802.3ad MIB. |
.1.3.6.1.4.1.9.9.225.3.2.3
|
|
|
A collection of objects that provide the load balancing
information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB. |
.1.3.6.1.4.1.9.9.225.3.2.4
|
|
|
A collection of object that provides information about
ports in an aggregation. |
.1.3.6.1.4.1.9.9.225.3.2.5
|
|
|
A collection of object that provides information about
the maximum number of aggregators supported by the device. |
.1.3.6.1.4.1.9.9.225.3.2.6
|
|
|
A collection of object that provides information about
the rate at which LACP packets are ingressed on interfaces. |
.1.3.6.1.4.1.9.9.225.3.2.7
|
|
|
A collection of objects that provides information about
the LACP protocol configurations for port channel interfaces. |
.1.3.6.1.4.1.9.9.225.3.2.8
|
|
|
A collection of objects that provides information about
the port channel configurations of hash distribution method on port channel interfaces. |
.1.3.6.1.4.1.9.9.225.3.2.9
|
|
|
A collection of object that provides information about global
configuration of hash distribution method on port channel interface. |
.1.3.6.1.4.1.9.9.225.3.2.10
|
|
|
A collection of objects that provides information about
the minimum link configurations for port channel interfaces. |
.1.3.6.1.4.1.9.9.225.3.2.11
|
|
|
A collection of objects that provides information about
ports in an aggregation in the format of CiscoInterfaceIndexList. |
.1.3.6.1.4.1.9.9.225.3.2.12
|
Compliance Statements (6)
OID
.1.3.6.1.4.1.9.9.225.3.1.1The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.225.3.1.2The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
| optional | clagAggDistributionMplsGroup |
This group is mandatory for the devices which supported aggregation load balancing for MPLS packets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.225.3.1.3The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
| optional | clagAggDistributionMplsGroup |
This group is mandatory for the devices which supported aggregation load balancing for MPLS packets. |
| optional | clagAggPortListGroup |
This group is mandatory for the devices which supports dot1dBasePort value greater than 2048. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.225.3.1.4The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
| optional | clagAggDistributionMplsGroup |
This group is mandatory for the devices which supported aggregation load balancing for MPLS packets. |
| optional | clagAggPortListGroup |
This group is mandatory for the devices which supports dot1dBasePort value greater than 2048. |
| optional | clagAggMaxAggregatorsGroup |
This group is mandatory for the devices which provides the information about the maximum number of aggregators supported by the device. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.225.3.1.5The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
| optional | clagAggDistributionMplsGroup |
This group is mandatory for the devices which supported aggregation load balancing for MPLS packets. |
| optional | clagAggPortListGroup |
This group is mandatory for the devices which supports dot1dBasePort value greater than 2048. |
| optional | clagAggMaxAggregatorsGroup |
This group is mandatory for the devices which provides the information about the maximum number of aggregators supported by the device. |
| optional | clagAggRateGroup |
This group is mandatory for devices that support LACP packet ingression rate on interfaces. |
| optional | clagAggChannelIfLacpGroup |
This group is mandatory for the devices which support the LACP port channel configurations on port channel interfaces. |
| optional | clagAggChannelIfHashDistMethodGroup |
This group is mandatory for the devices which support the hash distribution method configurations on port channel interfaces. |
| optional | clagAggHashDistGlobalGroup |
This group is mandatory for the devices which support global configuration of hash distribution method on port channel interface. |
| optional | clagAggChannelIfMinLinkGroup |
This group is mandatory for the devices which support minimum link configurations on port channel interfaces. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggDistributionProtocol | readonly | Write access is not required. | |
| clagAggDistributionAddressMode | readonly | Write access is not required. | |
| clagAggDistributionMplsProtocol | readonly | Write access is not required. | |
| clagAggHashDistMethodGlobalConfig | readonly | Write access is not required. | |
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. | |
| clagAggPortRate | readonly | Write access is not required. | |
| clagAggChannelIfFastSwitchOver | readonly | Write access is not required. | |
| clagAggChannelIfMaxBundle | readonly | Write access is not required. | |
| clagAggChannelIfMinLink | readonly | Write access is not required. | |
| clagAggChannelIfHashDistAdminMethod | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.225.3.1.6The compliance statement for entities which implement
the Cisco Link Aggregation MIB
the Cisco Link Aggregation MIB
Required groups
| mandatory | clagAggProtocolGroup | |
| mandatory | clagAggPortGroup | |
| optional | clagAggDistributionGroup |
This group is mandatory for the devices which supported aggregation load balancing. |
| optional | clagAggDistributionMplsGroup |
This group is mandatory for the devices which supported aggregation load balancing for MPLS packets. |
| optional | clagAggPortListGroup |
This group is mandatory for the devices which supports dot1dBasePort value greater than 2048. |
| optional | clagAggMaxAggregatorsGroup |
This group is mandatory for the devices which provides the information about the maximum number of aggregators supported by the device. |
| optional | clagAggRateGroup |
This group is mandatory for devices that support LACP packet ingression rate on interfaces. |
| optional | clagAggChannelIfLacpGroup |
This group is mandatory for the devices which support the LACP port channel configurations on port channel interfaces. |
| optional | clagAggChannelIfHashDistMethodGroup |
This group is mandatory for the devices which support the hash distribution method configurations on port channel interfaces. |
| optional | clagAggHashDistGlobalGroup |
This group is mandatory for the devices which support global configuration of hash distribution method on port channel interface. |
| optional | clagAggChannelIfMinLinkGroup |
This group is mandatory for the devices which support minimum link configurations on port channel interfaces. |
| optional | clagAggPortListInterfaceIndexGroup |
This group is mandatory for the devices which support Layer3 LACP interfaces. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| clagAggDistributionProtocol | readonly | Write access is not required. | |
| clagAggDistributionAddressMode | readonly | Write access is not required. | |
| clagAggDistributionMplsProtocol | readonly | Write access is not required. | |
| clagAggHashDistMethodGlobalConfig | readonly | Write access is not required. | |
| clagAggProtocolType | readonly | Write access is not required. | |
| clagAggPortAdminStatus | readonly | Write access is not required. | |
| clagAggPortRate | readonly | Write access is not required. | |
| clagAggChannelIfFastSwitchOver | readonly | Write access is not required. | |
| clagAggChannelIfMaxBundle | readonly | Write access is not required. | |
| clagAggChannelIfMinLink | readonly | Write access is not required. | |
| clagAggChannelIfHashDistAdminMethod | readonly | Write access is not required. |