CISCO-L2-TUNNEL-CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
11

cltcDot1qTunnelTable

table
.1.3.6.1.4.1.9.9.246.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcDot1qTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcDot1qTunnelTable' 
This table contains information about the dot1q tunnel
interfaces. Only dot1q tunneling capable interfaces are shown.
1Q-in-1Q will allow service providers to separate the traffic
of various customers within their infrastructure while the
customers appear to be on the same VLANs.
cltcDot1qTunnelEntry row .1.3.6.1.4.1.9.9.246.1.2.1.1
Information about the dot1q tunnel. Only dot1q tunneling
capable interfaces are shown.
Indexes
Column Syntax OID
cltcDot1qTunnelMode
Indicates the dot1q tunnel mode of the interface.

Setting the interface to dot1q tunnel 'disabled' mode causes
the dot1q tunnel feature to be disabled on this interface.
Setting the interface to dot1q tun…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.9.246.1.2.1.1.1

cltcTunneledProtocolTable

table
.1.3.6.1.4.1.9.9.246.1.3.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcTunneledProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunneledProtocolTable' 
This table contains information about the protocols being
tunneled. Only tunneled protocol filtering capable interfaces
are shown.
cltcTunneledProtocolEntry row .1.3.6.1.4.1.9.9.246.1.3.1.1
Information about the protocols being tunneled. Only tunneled
protocol filtering capable interfaces are shown.
Indexes
Column Syntax OID
cltcTunneledProtocolType
Indicates tunneled protocol of the interface.

If a BIT is set, then the value of the corresponding
protocol is tunneled. Specifically, if the 'cdp(0)'
BIT is set, then the Cisco Discovery Protocol PDU is
…
Bitsr/w
Enumerated Values:
0cdp
1vtp
2stp
3eoam
4lldp
 .1.3.6.1.4.1.9.9.246.1.3.1.1.1

cltcTunnelThresholdTable

table
.1.3.6.1.4.1.9.9.246.1.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcTunnelThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelThresholdTable' 
This table contains information about the thresholds for
protocol tunneling. Only tunneled protocol filtering capable
interfaces are shown. The objects will be on a per interface,
per protocol basis.
cltcTunnelThresholdEntry row .1.3.6.1.4.1.9.9.246.1.4.1.1
Information about the thresholds for protocol tunneling. Only
tunneled protocol filtering capable interfaces are shown. The
entries will be on a per interface, per protocol basis
Indexes
Column Syntax OID
cltcTunnelThresholdProtocolIndex
A tunneled protocol of an interface.

- all(1) is supported for devices which allow the setting
of thresholds on a per interface basis. This threshold is
a combined threshold for the interface which in…
Enumeration
Enumerated Values:
1all
2cdp
3vtp
4stp
5eoam
6lldp
 .1.3.6.1.4.1.9.9.246.1.4.1.1.1
cltcTunnelDropThreshold
The drop threshold on an interface for a given protocol. After
reaching this drop threshold, the interface will start dropping
PDUs for the given protocol. This value cannot be greater than
the value of cltcTunnelShutdo…
PDUs/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.4.1.1.2
cltcTunnelShutdownThreshold
The shutdown threshold on an interface for a given protocol.
After reaching the shutdown threshold, the interface will
shutdown for the given protocol. This value cannot be less
than the value of cltcTunnelDropThreshol…
PDUs/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.4.1.1.3

cltcTunnelStatisticsTable

table
.1.3.6.1.4.1.9.9.246.1.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcTunnelStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelStatisticsTable' 
This table contains protocol tunneling statistics on the
interface.
cltcTunnelStatisticsEntry row .1.3.6.1.4.1.9.9.246.1.5.1.1
Protocol tunneling statistics on the interface.
Indexes
Column Syntax OID
cltcTunneledProtocolIndex
A tunneled protocol of an interface.
Enumeration
Enumerated Values:
2cdp
3vtp
4stp
5eoam
6lldp
 .1.3.6.1.4.1.9.9.246.1.5.1.1.1
cltcTunnelEncapStats
The tunneled PDU encapsulation statistics of an interface.
These statistics cover the number of tunneled ingress
PDUs.
encapsulated PDUsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.5.1.1.2
cltcTunnelDeEncapStats
The tunneled PDU de-encapsulation statistics of an interface.
These statistics cover the number of tunneled egress PDUs.
de-encapsulated PDUsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.5.1.1.3
cltcTunnelDropStats
The number of PDUs dropped on an interface for a given
protocol. The PDUs will be dropped when the
cltcTunnelDropThreshold is reached.
PDUsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.5.1.1.4

cltcTunnelDropStatTable

table
.1.3.6.1.4.1.9.9.246.1.5.2 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcTunnelDropStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelDropStatTable' 
This table contains protocol tunneling drop statistics.
cltcTunnelDropStatEntry row .1.3.6.1.4.1.9.9.246.1.5.2.1
Drop statistics for a tunneled protocol.
Indexes
Column Syntax OID
cltcTunnelTotalDropStats
The number of tunneled ingress PDUs that have been dropped.
encapsulated PDUsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.246.1.5.2.1.1

cltcDot1qAllTaggedIfTable

table
.1.3.6.1.4.1.9.9.246.1.6.2 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cltcDot1qAllTaggedIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::cltcDot1qAllTaggedIfTable' 
This table contains information about the dot1q-all-tagged
feature's configuration of capable interfaces in the system.
cltcDot1qAllTaggedIfEntry row .1.3.6.1.4.1.9.9.246.1.6.2.1
Configuration of dot1q-all-tagged feature on interfaces. Each
entry is created for a dot1q-all-tagged capable interface in
the system.
Indexes
Column Syntax OID
cltcDot1qAllTaggedIfEnabled
This object specifies whether dot1q-all-tagged feature has been
enabled on a specific interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.246.1.6.2.1.1