Standard view Table view

CISCO-L2-TUNNEL-CONFIG-MIB

        This MIB module is for layer 2 tunneling related configurations
on a device.
        
Tunneling allows separate local networks to be considered as
a single VLAN. These separate networks are connected via an
ISP, which will tunnel the packets from one network to another,
making it appear as if the two networks are actually just one.
Source file
CISCO-L2-TUNNEL-CONFIG-MIB
Last revised
Identity
ciscoL2TunnelConfigMIB
Base OID
1.3.6.1.4.1.9.9.246
Imported Objects
CISCO-QOS-PIB-MIB QosLayer2Cos
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-L2-TUNNEL-CONFIG-MIB::ciscoL2TunnelConfigMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-TUNNEL-CONFIG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-TUNNEL-CONFIG-MIB::ciscoL2TunnelConfigMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (41)
ciscoL2TunnelConfigMIB
.1.3.6.1.4.1.9.9.246
cltcMIBObjects
.1.3.6.1.4.1.9.9.246.1
cltcGlobal
.1.3.6.1.4.1.9.9.246.1.1
cltcTunnelCos r/w
CISCO-QOS-PIB-MIBQosLayer2Cos
 .1.3.6.1.4.1.9.9.246.1.1.1
cltcNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.246.1.1.2
cltcTunnelSysDropThreshold r/w
PDUs/secSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.246.1.1.3
cltcTunnelSysDropNotifEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.246.1.1.4
cltcDot1qTunnel
.1.3.6.1.4.1.9.9.246.1.2
cltcDot1qTunnelTable
.1.3.6.1.4.1.9.9.246.1.2.1
cltcDot1qTunnelEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.246.1.2.1.1
cltcDot1qTunnelMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.246.1.2.1.1.1
cltcTunneledProtocol
.1.3.6.1.4.1.9.9.246.1.3
cltcTunneledProtocolTable
.1.3.6.1.4.1.9.9.246.1.3.1
cltcTunneledProtocolEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.246.1.3.1.1
cltcTunneledProtocolType r/w
Bits
 .1.3.6.1.4.1.9.9.246.1.3.1.1.1
cltcTunnelThreshold
.1.3.6.1.4.1.9.9.246.1.4
cltcTunnelThresholdTable
.1.3.6.1.4.1.9.9.246.1.4.1
cltcTunnelThresholdEntry
IF-MIBifIndexcltcTunnelThresholdProtocolIndex
 .1.3.6.1.4.1.9.9.246.1.4.1.1
cltcTunnelThresholdProtocolIndex
Enumeration
 .1.3.6.1.4.1.9.9.246.1.4.1.1.1
cltcTunnelDropThreshold r/w
PDUs/secSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.246.1.4.1.1.2
cltcTunnelShutdownThreshold r/w
PDUs/secSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.246.1.4.1.1.3
cltcTunnelStatistics
.1.3.6.1.4.1.9.9.246.1.5
cltcTunnelStatisticsTable
.1.3.6.1.4.1.9.9.246.1.5.1
cltcTunnelStatisticsEntry
IF-MIBifIndexcltcTunneledProtocolIndex
 .1.3.6.1.4.1.9.9.246.1.5.1.1
cltcTunneledProtocolIndex
Enumeration
 .1.3.6.1.4.1.9.9.246.1.5.1.1.1
cltcTunnelEncapStats
encapsulated PDUsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.246.1.5.1.1.2
cltcTunnelDeEncapStats
de-encapsulated PDUsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.246.1.5.1.1.3
cltcTunnelDropStats
PDUsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.246.1.5.1.1.4
cltcTunnelDropStatTable
.1.3.6.1.4.1.9.9.246.1.5.2
cltcTunnelDropStatEntry
cltcTunneledProtocolIndex
 .1.3.6.1.4.1.9.9.246.1.5.2.1
cltcTunnelTotalDropStats
encapsulated PDUsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.246.1.5.2.1.1
cltcDot1qAllTagged
.1.3.6.1.4.1.9.9.246.1.6
cltcDot1qAllTaggedEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.246.1.6.1
cltcDot1qAllTaggedIfTable
.1.3.6.1.4.1.9.9.246.1.6.2
cltcDot1qAllTaggedIfEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.246.1.6.2.1
cltcDot1qAllTaggedIfEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.246.1.6.2.1.1
cltcMIBNotifications
.1.3.6.1.4.1.9.9.246.2
cltcMIBNotificationsPrefix
.1.3.6.1.4.1.9.9.246.2.0
cltcMIBConformance
.1.3.6.1.4.1.9.9.246.3
cltcMIBCompliances
.1.3.6.1.4.1.9.9.246.3.1
cltcMIBGroups
.1.3.6.1.4.1.9.9.246.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. CISCO-QOS-PIB-MIBcisco
  6. IANAifType-MIBrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. CISCO-L2-TUNNEL-CONFIG-MIBciscoselected
Conformance Groups (12)
cltcDot1qTunnelGroup
cltcDot1qTunnelMode
A collection of objects for configuring dot1q tunnneling.
 .1.3.6.1.4.1.9.9.246.3.2.1
cltcTunneledProtocolGroup
cltcTunneledProtocolType cltcTunnelCos
A collection of objects for configuring tunneled protocols.
 .1.3.6.1.4.1.9.9.246.3.2.2
cltcTunnelThresholdGroup
cltcTunnelDropThreshold cltcTunnelShutdownThreshold
A collection of objects for configuring the thresholds for
protocol tunneling.
 .1.3.6.1.4.1.9.9.246.3.2.3
cltcTunnelStatisticsGroup
cltcTunnelEncapStats cltcTunnelDeEncapStats
A collection of objects which give the statistics regarding
the tunneling interfaces.
 .1.3.6.1.4.1.9.9.246.3.2.4
cltcDot1qAllTaggedGroup
cltcDot1qAllTaggedEnabled cltcDot1qAllTaggedIfEnabled
A collection of objects for configuring the dot1q-all-tagged
feature in the system.
 .1.3.6.1.4.1.9.9.246.3.2.5
cltcTunnelDropStatisticsGroup
cltcTunnelDropStats
A collection of objects which give the statistics regarding
dropped PDUs on the tunneling interfaces.
 .1.3.6.1.4.1.9.9.246.3.2.6
cltcNotifsEnableGroup
cltcNotificationEnable
A collections of objects used to enable notifications.
 .1.3.6.1.4.1.9.9.246.3.2.7
cltcTunnelThresholdNotifsGroup
cltcTunnelDropThresholdExceeded cltcTunnelShutdownThresholdExceeded
A collection of notifications used for the tunnel
thresholds.
 .1.3.6.1.4.1.9.9.246.3.2.8
cltcTunnelTotalDropGroup
cltcTunnelTotalDropStats
A collection of objects which give the statistics regarding
total number of dropped PDUs per protocol type.
 .1.3.6.1.4.1.9.9.246.3.2.9
cltcTunnelSysDropNotifEnableGroup
cltcTunnelSysDropNotifEnable
A collection of object to enable
cltcTunnelSysDropThresholdExceeded notification.
 .1.3.6.1.4.1.9.9.246.3.2.10
cltcTunnelSysDropGroup
cltcTunnelSysDropThreshold
A collection of object for configuring the system level
rate limiting.
 .1.3.6.1.4.1.9.9.246.3.2.11
cltcTunnelSysDropNotifGroup
cltcTunnelSysDropThresholdExceeded
A collection of notification used for the system level rate
limiting has been exceeded.
 .1.3.6.1.4.1.9.9.246.3.2.12
Compliance Statements (5)

OID .1.3.6.1.4.1.9.9.246.3.1.1
The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB.
Required groups
optional cltcDot1qTunnelGroup A collection of objects for configuring dot1q tunnneling.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunneledProtocolGroup A collection of objects for configuring tunneled protocols.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunnelThresholdGroup A collection of objects for configuring the thresholds for
protocol tunneling. This group is mandatory only in devices
which support protocol tunneling.
optional cltcTunnelStatisticsGroup A collection of objects which give the statistics regarding
the tunneling interfaces. This group is mandatory only in
devices which support tunneling statistics.

OID .1.3.6.1.4.1.9.9.246.3.1.2
The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB.
Required groups
optional cltcDot1qTunnelGroup A collection of objects for configuring dot1q tunnneling.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunneledProtocolGroup A collection of objects for configuring tunneled protocols.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunnelThresholdGroup A collection of objects for configuring the thresholds for
protocol tunneling. This group is mandatory only in devices
which support protocol tunneling.
optional cltcTunnelStatisticsGroup A collection of objects which give the statistics regarding
the tunneling interfaces. This group is mandatory only in
devices which support tunneling statistics.
optional cltcDot1qAllTaggedGroup This group is mandatory only in devices which support
dot1q-all-tagged feature.
Object refinements
ObjectAccessSyntaxDescription
cltcDot1qAllTaggedEnabled readonly
Write access is not required.
cltcDot1qAllTaggedIfEnabled readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.246.3.1.3
The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB.
Required groups
optional cltcDot1qTunnelGroup A collection of objects for configuring dot1q tunnneling.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunneledProtocolGroup A collection of objects for configuring tunneled protocols.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunnelThresholdGroup A collection of objects for configuring the thresholds for
protocol tunneling. This group is mandatory only in devices
which support protocol tunneling.
optional cltcTunnelStatisticsGroup A collection of objects which give the statistics regarding
the tunneling interfaces. This group is mandatory only in
devices which support tunneling statistics.
optional cltcDot1qAllTaggedGroup This group is mandatory only in devices which support
dot1q-all-tagged feature.
optional cltcTunnelDropStatisticsGroup A collection of objects which give the statistics regarding
dropped PDUs on the tunneling interfaces. This group is
mandatory only in devices which support tunneling drop
statistics.
Object refinements
ObjectAccessSyntaxDescription
cltcDot1qAllTaggedEnabled readonly
Write access is not required.
cltcDot1qAllTaggedIfEnabled readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.246.3.1.4
The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB.
Required groups
optional cltcDot1qTunnelGroup A collection of objects for configuring dot1q tunnneling.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunneledProtocolGroup A collection of objects for configuring tunneled protocols.
This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunnelThresholdGroup A collection of objects for configuring the thresholds for
protocol tunneling. This group is mandatory only in devices
which support protocol tunneling.
optional cltcTunnelStatisticsGroup A collection of objects which give the statistics regarding
the tunneling interfaces. This group is mandatory only in
devices which support tunneling statistics.
optional cltcDot1qAllTaggedGroup This group is mandatory only in devices which support
dot1q-all-tagged feature.
optional cltcTunnelDropStatisticsGroup A collection of objects which give the statistics regarding
dropped PDUs on the tunneling interfaces. This group is
mandatory only in devices which support tunneling drop
statistics.
optional cltcNotifsEnableGroup A collections of objects used to enable notifications.
This group is mandatory only in devices which support
the protocol tunneling notification feature.
optional cltcTunnelThresholdNotifsGroup A collection of notifications used for the tunnel
thresholds. This group is mandatory only in devices
which support the protocol tunneling notification
feature.
Object refinements
ObjectAccessSyntaxDescription
cltcDot1qAllTaggedEnabled readonly
Write access is not required.
cltcDot1qAllTaggedIfEnabled readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.246.3.1.5
The compliance statement for the CISCO-L2-TUNNEL-CONFIG-MIB.
Required groups
optional cltcDot1qTunnelGroup This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunneledProtocolGroup This group is mandatory only in devices which support dot1q
tunneling.
optional cltcTunnelThresholdGroup This group is mandatory only in devices which support
protocol tunneling threshold feature.
optional cltcTunnelStatisticsGroup This group is mandatory only in devices which support
per interface tunneling statistics.
optional cltcDot1qAllTaggedGroup This group is mandatory only in devices which support
dot1q-all-tagged feature.
optional cltcTunnelDropStatisticsGroup This group is mandatory only in devices which support
per interface tunneling drop statistics.
optional cltcTunnelTotalDropGroup This group is mandatory only in devices which support
per device tunneling drop statistics.
optional cltcNotifsEnableGroup This group is mandatory only in devices which support
the protocol tunneling notification feature.
optional cltcTunnelThresholdNotifsGroup This group is mandatory only in devices which support
the protocol tunneling notification feature.
optional cltcTunnelSysDropNotifEnableGroup This group is mandatory only in devices which support
the notification for the system drop threshold.
optional cltcTunnelSysDropGroup This group is mandatory only in devices which support
the system drop threshold.
optional cltcTunnelSysDropNotifGroup This group is mandatory only in devices which support
the notification for the system drop threshold.
Object refinements
ObjectAccessSyntaxDescription
cltcDot1qAllTaggedEnabled readonly
Write access is not required.
cltcDot1qAllTaggedIfEnabled readonly
Write access is not required.
Notifications / Traps (3)
NameOIDDescription
cltcTunnelDropThresholdExceeded
cltcTunnelDropThreshold
.1.3.6.1.4.1.9.9.246.2.0.1
This notification is generated when the
cltcTunnelDropThreshold has been exceeded.
cltcTunnelShutdownThresholdExceeded
cltcTunnelShutdownThreshold
.1.3.6.1.4.1.9.9.246.2.0.2
This notification is generated when the
cltcTunnelShutdownThreshold has been exceeded.
cltcTunnelSysDropThresholdExceeded
cltcTunnelSysDropThreshold
.1.3.6.1.4.1.9.9.246.2.0.3
This notification is generated when the
cltcTunnelSysDropThreshold has been exceeded.