CISCO-L2-DEV-MONITORING-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
6
cl2DevMonActiveTable
table
.1.3.6.1.4.1.9.9.271.1.1.3
·
1 row entry
·
6 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cl2DevMonActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-DEV-MONITORING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-DEV-MONITORING-MIB::cl2DevMonActiveTable'
The table for active devices on the network being monitored by the hot standby monitoring unit. This table is on the hot standby monitoring unit. All entries on this table will only be added, deleted, modified using command user interface or SNMP request.
An entry in the cl2DevMonActiveTable table.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Mac address of the active unit to be monitored by
this hot standby monitoring unit. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.9.9.271.1.1.3.1.1 |
||||||||||||
|
The frequency, in seconds, the active unit
specified by cl2DevMonActiveMacAddress is polled for its health. |
secondsUnsigned32r/w Constraints: range: 1-30 |
.1.3.6.1.4.1.9.9.271.1.1.3.1.2 |
||||||||||||
|
The total time, in seconds, the standby monitoring
unit can tolerate the failure of polling of the active unit. After this duration, one more failure of the polling will trigger this hot standby monitoring unit to ta… |
secondsUnsigned32r/w Constraints: range: 1-600 |
.1.3.6.1.4.1.9.9.271.1.1.3.1.3 |
||||||||||||
|
The status column used for creating, modifying, and
deleting instances of the columnar objects in the cl2DevMonActiveTable table. Creation of rows must be done via 'createAndGo' and all columns are mand… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.9.9.271.1.1.3.1.4 |
||||||||||||
|
If the device being monitored is a IEEE 802.11
Wireless device, cl2DevMonActiveMacAddress is the remote device radio MAC address and this is the type of IEEE 802.11 Standard applies that radio: ieee802dot11a(1) -… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.5 |
||||||||||||
|
If the device being monitored is a IEEE 802.11
Wireless LAN device, this is the ifIndex of a local radio of ifType ieee80211(71) used for the monitoring. If the local radio only supports to monitor only… |
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.9.9.271.1.1.3.1.6 |
