CISCO-L2-DEV-MONITORING-MIB
This MIB module is for monitoring of active
layer 2 devices by hot standby layer 2 devices
and the configuration of hot standby switch-over
parameters.
- Source file
CISCO-L2-DEV-MONITORING-MIB- Last revised
- Identity
ciscoL2DevMonMIB- Base OID
1.3.6.1.4.1.9.9.271
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-L2-DEV-MONITORING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-L2-DEV-MONITORING-MIB::ciscoL2DevMonMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L2-DEV-MONITORING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L2-DEV-MONITORING-MIB::ciscoL2DevMonMIB'
Objects (17)
Showing 17 of 17 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.271 |
||
.1.3.6.1.4.1.9.9.271.0 |
||
.1.3.6.1.4.1.9.9.271.1 |
||
.1.3.6.1.4.1.9.9.271.1.1 |
||
.1.3.6.1.4.1.9.9.271.1.1.1 |
||
.1.3.6.1.4.1.9.9.271.1.1.2 |
||
.1.3.6.1.4.1.9.9.271.1.1.3 |
||
.1.3.6.1.4.1.9.9.271.1.1.3.1 |
||
.1.3.6.1.4.1.9.9.271.1.1.3.1.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.2 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.3 |
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.5 |
|
.1.3.6.1.4.1.9.9.271.1.1.3.1.6 |
||
.1.3.6.1.4.1.9.9.271.2 |
||
.1.3.6.1.4.1.9.9.271.2.1 |
||
.1.3.6.1.4.1.9.9.271.2.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-L2-DEV-MONITORING-MIBciscoselected
Conformance Groups (3)
|
cl2DevMonInStandbyMode cl2DevMonNotifEnabled cl2DevMonActivePollingFrequency cl2DevMonActivePollingTimeOut cl2DevMonActiveRowStatus
Management information to support operation of
L2 monitoring and hot standby. |
.1.3.6.1.4.1.9.9.271.2.2.1
|
|
|
The notifications for the
CISCO-L2-DEV-MONITORING-MIB |
.1.3.6.1.4.1.9.9.271.2.2.2
|
|
|
Management information to identify the MAC type
of a IEEE 802.11 Wireless LAN device and local radio ifIndex. |
.1.3.6.1.4.1.9.9.271.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.271.2.1.1The compliance statement for the
ciscoL2DevMonConfig group.
ciscoL2DevMonConfig group.
Required groups
| mandatory | ciscoL2DevMonConfigGroup | |
| mandatory | ciscoL2DevMonNotificationGroup |
OID
.1.3.6.1.4.1.9.9.271.2.1.2The compliance statement for the
ciscoL2DevMonConfig group.
ciscoL2DevMonConfig group.
Required groups
| mandatory | ciscoL2DevMonConfigGroup | |
| mandatory | ciscoL2DevMonNotificationGroup | |
| optional | ciscoL2DevMonRadioConfigGroup |
Implementation of this group is required when object cl2DevMonActiveRadioMacType value is one of the IEEE 802.11 MAC protocol. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.271.0.1 |
This cl2DevMonSwitchover notification will
only be sent when this device changes its cl2DevMonInStandbyMode to FALSE and becomes an active unit. The sending of these notifications can be enabled/disabled via the cl2DevMonNotifEnabled object. |