CISCO-IVR-MIB Table View

A table containing information on each Inter-VSAN (IV) 
zonesets which are configured locally. It comprises the
zonesets in the full IV zone database.
There could be multiple IV zonesets configured. But 
only one zoneset is allowed to be active at a time. 
An IV zoneset is a collection of IV zones.

civrZoneSetEntry row .1.3.6.1.4.1.9.9.371.1.1.2.2.1

An entry (conceptual row) in the civrZoneSetTable.

The sequence of operations to be performed in order
to create a zoneset is as follows:

- create zone entries in the civrZoneTable.
…

Indexes

civrZoneSetIndex

Column	Syntax	OID
civrZoneSetIndex The index of a zoneset. This object uniquely identifies an IV zoneset. This object could have the same value as civrZoneSetTableNextIndex.	Unsigned32 Constraints: range: 1-2048	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.1
civrZoneSetName The name of this zoneset. The civrZoneSetName should be unique on this device. This object cannot be modified while the corresponding value of civrZoneSetRowStatus is equal to 'active'. Thi…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.2
civrZoneSetZoneList The set of IV zones which form this zoneset. The IV zones are identified by civrZoneIndex object in the civrZoneTable. If a particular bit has a value of '1', then the corresponding zone is a part of t…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.3
civrZoneSetLastChange The value of sysUpTime at the time of the last change to this IV zoneset entry. If the entry has not been modified since the last re-initialization of the local network management system, then this object will contain a…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.4
civrZoneSetChecksum The checksum of content of this zoneset.	CIvrChecksum Type Constraints: range: 1..255	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.5
civrZoneSetRowStatus The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of civrZoneSetName is unique.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.2.2.1.6

This table gives information on all the IV zones and 
lists all their members. IV zones is group of IV members
(FC devices like hosts, disks) in different VSANs.

civrZoneEntry row .1.3.6.1.4.1.9.9.371.1.1.3.2.1

An entry (conceptual row) in the civrZoneTable.
These are the zones in the full IV zone database.
The sequence of operations to be performed in
order to create a IV Zone is as follows:

- create an entry in…

Indexes

civrZoneIndex

Column	Syntax	OID
civrZoneIndex The index of an IV Zone. This object could have the same value as civrZoneTableNextIndex.	Unsigned32 Constraints: range: 1-2048	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.1
civrZoneName The name of this zone. The zoneName should be unique this device. This object can not be modified while the corresponding value of civrZoneRowStatus is 'active'. This object MUST be set bef…	OctetStringr/w Constraints: range: 1-58	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.2
civrZoneMemberList The set of IV Zone members that form this IV zone. The IV zone members are identified by civrZoneMemberIndex object in the civrZoneMemberTable. If a particular bit has a value of '1', the…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.3
civrZoneLastChange The value of sysUpTime at the time of the last change to this IV zone entry. If the entry has not been modified since the last re-initialization of the local network management system, then this object will contain a z…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.5
civrZoneRowStatus The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of zoneName is unique on this device.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.6
civrZoneReadOnly This object indicates if only SCSI read operations are allowed on members of this IV zone which are SCSI targets. If this object is set to 'true', then only SCSI read operations are permitted. So, this IV…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.7
civrZoneQosPriority This object specifies if qos attribute for this IV zone is enabled. If this object is set to a value other than 'none', then qos attribute for this IV zone is enabled. If this object is set to 'none', then qos attribut…	CISCO-ZS-MIBZoneQosPriorityLevelr/w Type Values: 1 none 2 low 3 medium 4 high	.1.3.6.1.4.1.9.9.371.1.1.3.2.1.8

This table contains all the IV zones that are 
present in the active IV zoneset.

civrZoneEnforcedZoneEntry row .1.3.6.1.4.1.9.9.371.1.1.3.4.1

An entry (conceptual row) in this table.

Indexes

civrZoneIndex

Column	Syntax	OID
civrZoneEnforcedZoneName The name of this zone.	OctetString Constraints: range: 1-58	.1.3.6.1.4.1.9.9.371.1.1.3.4.1.1
civrZoneEnforcedZoneMemberList The set of members that form this IV zone. This object was copied from the civrZoneMemberList object in the civrZoneTable at the time when the currently active zoneset was activated.	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.3.4.1.2
civrZoneEnforcedZoneReadOnly This object indicates whether this is a read-only IV zone. This object was copied from the civrZoneReadOnly object in the civrZoneTable at the time when the currently active zoneset was activated.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.371.1.1.3.4.1.3
civrZoneEnforcedZoneQosPriority This object indicates whether this is a qos enabled IV zone. This object was copied from the civrZoneQosPriority object in the civrZoneTable at the time when the currently active zoneset was activated.	CISCO-ZS-MIBZoneQosPriorityLevel Type Values: 1 none 2 low 3 medium 4 high	.1.3.6.1.4.1.9.9.371.1.1.3.4.1.4

This table contains all members of all the IV Zones
in the civrZoneTable and information about those 
members. These are the members part of full IV zone 
database.

civrZoneMemberEntry row .1.3.6.1.4.1.9.9.371.1.1.4.2.1

An entry (conceptual row) in the civrZoneMemberTable.
Each entry represents the relationship between
a member and (one of) its 'parent(s)', i.e., an
IV zone to which the member belongs to.

Indexes

civrZoneMemberParentIndex civrZoneMemberIndex

Column	Syntax	OID
civrZoneMemberParentIndex This object contains the value of the index of the IV zone to which this member belongs to.	Unsigned32 Constraints: range: 1-2048	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.1
civrZoneMemberIndex The index of this IV zone member on this IV zone.	Unsigned32 Constraints: range: 1-2048	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.2
civrZoneMemberType The type of IV Zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.	CIvrZoneMemberTyper/w Type Values: 1 pwwnVsan	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.3
civrZoneMemberID This object represents the IV zone member ID. If civrZoneMemberType is 'pwwnVsan', this object contains port WWN. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'activ…	OctetStringr/w	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.4
civrZoneMemberAFId The Autonomous Fabric identifier of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.	CIvrAutonomousFabricIdr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.5
civrZoneMemberVsan The VSAN of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.	CISCO-ST-TCVsanIndexr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.6
civrZoneMemberRowStatus The status of this conceptual row. civrMemberType, civrZoneMemberID and civrZoneMemberVsan objects MUST be set before or concurrently with setting the corresponding instance of civrZoneMemberRowStatus to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.7
civrZoneMemberLunID This object specifies the Lun ID if IV Lun zoning is configured. If this object is the zero-length string, then IV Lun zoning is not configured. This object cannot be modified while the cor…	OctetStringr/w Constraints: range: 8-8 range: 0-0	.1.3.6.1.4.1.9.9.371.1.1.4.2.1.8

This table contains all members that are part 
of a IV zone and are part of the active IV zone 
set.

civrZoneEnforcedZoneMemberEntry row .1.3.6.1.4.1.9.9.371.1.1.4.4.1

An entry (conceptual row) in this table.

Indexes

civrZoneMemberParentIndex civrZoneMemberIndex

Column	Syntax	OID
civrZoneEnforcedZoneMemberType The type of IV zone member. This object was copied from the civrZoneMemberType object in the civrZoneMemberTable at the time when the currently active zoneset was activated.	CIvrZoneMemberType Type Values: 1 pwwnVsan	.1.3.6.1.4.1.9.9.371.1.1.4.4.1.2
civrZoneEnforcedZoneMemberID This object represents this member's address. This object was copied from the civrZoneMemberID object in the civrZoneMemberTable at the time when the currently active zoneset was activated.	OctetString	.1.3.6.1.4.1.9.9.371.1.1.4.4.1.3
civrZoneEnforcedZoneMemberAFId The Autonomous Fabric identifier of the member. This object was copied from the civrZoneMemberAFId object in the civrZoneMemberTable at the time when the currently active zoneset was activated.	CIvrAutonomousFabricId Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.4.4.1.4
civrZoneEnforcedZoneMemberVsan The VSAN of the member. This object was copied from the civrZoneMemberVsan object in the civrZoneMemberTable at the time when the currently active zoneset was activated.	CISCO-ST-TCVsanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.371.1.1.4.4.1.5
civrZoneEnforcedZoneMemberLunID This object specifies the Lun ID if IV Lun zoning is configured. This object was copied from the civrZoneMemberLunID object in the civrZoneMemberTable at the time when the currently active zoneset was activated.	OctetString Constraints: range: 8-8 range: 0-0	.1.3.6.1.4.1.9.9.371.1.1.4.4.1.6

This table contains the configured IVR topology.
The topology is specified in terms of one or more 
Autonomous Fabrics made of switches and the VSANs 
to/from which the switches provide connectivity.
The configured topology is not applied until it is made
active using using object civrTopologyActivate.

civrTopologyConfigEntry row .1.3.6.1.4.1.9.9.371.1.1.5.2.1

An entry (conceptual row) in this table.

Indexes

civrTopologyConfigAutoFabricId civrTopologyConfigSwitchWwn

Column	Syntax	OID
civrTopologyConfigSwitchWwn The configured switch WWN of this device.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.371.1.1.5.2.1.1
civrTopologyConfigAutoFabricId The configured Autonomous Fabric id of this device.	CIvrAutonomousFabricId Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.5.2.1.2
civrTopologyConfigSwitchVsan2k The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, th…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.2.1.3
civrTopologyConfigSwitchVsan4k The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through …	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.2.1.4
civrTopologyConfigRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.5.2.1.5

This table contains the IVR topology.
The topology is specified in terms of one or more 
Autonomous Fabrics made of switches and the VSANs 
to/from which the switches provide connectivity.

civrTopologyActiveEntry row .1.3.6.1.4.1.9.9.371.1.1.5.8.1

An entry (conceptual row) in this table.

Indexes

civrTopologyActiveAutoFabricId civrTopologyActiveSwitchWwn

Column	Syntax	OID
civrTopologyActiveSwitchWwn The switch WWN of this device.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.371.1.1.5.8.1.1
civrTopologyActiveAutoFabricId The Autonomous Fabric id of this device.	CIvrAutonomousFabricId Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.5.8.1.2
civrTopologyActiveSwitchVsan2k The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second o…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.8.1.3
civrTopologyActiveSwitchVsan4k The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the s…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.8.1.4

This table contains the Autonomous Fabric id
(AFID) configurations when automatic VSAN topology
discovery is activated. An entry (conceptual row)
in this table represents an AFID and its
VSANs on a switch.

civrTopologyAfidConfEntry row .1.3.6.1.4.1.9.9.371.1.1.5.11.1

An entry (conceptual row) in this table.

Indexes

civrTopologyAfidConfSwitchWwn civrTopologyAfidConfId

Column	Syntax	OID
civrTopologyAfidConfSwitchWwn The switch WWN of this device.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.371.1.1.5.11.1.1
civrTopologyAfidConfId The configured Autonomous Fabric id of this device.	CIvrAutonomousFabricId Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.5.11.1.2
civrTopologyAfidConfSwitchVsan2k The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. Each octet within the value of this object sp…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.11.1.3
civrTopologyAfidConfSwitchVsan4k The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. Each octet within the value of this object sp…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.11.1.4
civrTopologyAfidConfRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.5.11.1.5

This table contains the default Autonomous Fabric
id (AFID) configurations when automatic VSAN topology
discovery is activated. An entry (conceptual row)
in this table represents the default AFID for
a switch.

civrTopologyDefaultAfidEntry row .1.3.6.1.4.1.9.9.371.1.1.5.13.1

An entry (conceptual row) in this table.

Indexes

civrTopologyDefaultAfidSwitchWwn

Column	Syntax	OID
civrTopologyDefaultAfidSwitchWwn The switch WWN of this device.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.371.1.1.5.13.1.1
civrTopologyDefaultAfidId The configured Default Autonomous Fabric id of this switch.	CIvrAutonomousFabricIdr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.1.5.13.1.2
civrTopologyDefaultAfidStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.5.13.1.3

This table contains configurations of
Inter-VSAN Routing (IVR) Service Group.
An Inter VSAN Routing Service Group defines a
logical boundary for Inter-VSAN Routing.
Inter-VSAN Routing is restricted among VSANs
within their own Inter-VSAN Routing Service
Group only.

civrTopologyIvrSrvGrpEntry row .1.3.6.1.4.1.9.9.371.1.1.5.14.1

An entry (conceptual row) in this table.

Indexes

civrTopologyIvrSrvGrpName civrTopologyAfidConfId

Column	Syntax	OID
civrTopologyIvrSrvGrpName This object contains the name of the IVR Service Group corresponding to this conceptual row.	OctetString Constraints: range: 1-80	.1.3.6.1.4.1.9.9.371.1.1.5.14.1.1
civrTopologyIvrSrvGrpVsan2k The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.14.1.2
civrTopologyIvrSrvGrpVsan4k The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.371.1.1.5.14.1.3
civrTopologyIvrSrvGrpRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.371.1.1.5.14.1.4

A table containing status of the current active
IV Zoneset on each local VSANs.

civrZoneSetStatusEntry row .1.3.6.1.4.1.9.9.371.1.2.1.1

An entry (conceptual row) in the
civrZoneSetStatusTable.

Indexes

CISCO-VSAN-MIBvsanIndex

Column	Syntax	OID
civrZoneSetStatus Status of the active IV Zoneset on this VSAN. idle - idle active - active deactive - deactive defaultZoneDeny …	Enumeration Enumerated Values: 1 idle 2 active 3 deactive 4 defaultZoneDeny 5 activationFailed 6 deactivationFailed 7 activationNotInitiated 8 activationFailedFabricChgFailed 9 deactivationNotInitiated 10 deactivationFailedFabChgFailed 11 activating 12 activatingWaitForLowestSwwn 13 activatingFabricChanging 14 deactivating 15 deactivatingWaitForLowestSwwn 16 deactivatingFabricChanging 17 defaultZonePermit 18 defaultZonePermitNoForce 19 defaultZonePermitActZsNoForce 20 denyNoActiveZoneset 21 activationFailedLowestWwnWait 22 deactivationFailedLowestWwnWait	.1.3.6.1.4.1.9.9.371.1.2.1.1.1

This table contains the all IVR enabled devices
known to the local device on each of the local VSANs.
Note that the devices are learned using an internal 
protocol. So if a device in this table is not reachable,
anymore from the local switch, then it is removed from
this table. Also, if a new device is learned,
it is added to this table.

civrEnabledDeviceEntry row .1.3.6.1.4.1.9.9.371.1.2.2.1

An entry (conceptual row) in this table. Each entry
represents a device in a particular VSAN.

Indexes

civrEnabledDeviceAutoFabricId civrEnabledDeviceVsan civrEnabledDeviceDomainId

Column	Syntax	OID
civrEnabledDeviceVsan The VSAN corresponding to this entry.	CISCO-ST-TCVsanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.371.1.2.2.1.1
civrEnabledDeviceAutoFabricId The Autonomous Fabric id corresponding to this entry.	CIvrAutonomousFabricId Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.371.1.2.2.1.2
civrEnabledDeviceDomainId The domain ID of this device corresponding this entry.	CISCO-ST-TCDomainId Type Constraints: range: 1..239	.1.3.6.1.4.1.9.9.371.1.2.2.1.3
civrEnabledDeviceSwitchWwn The switch WWN of this device.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.371.1.2.2.1.4
civrEnabledDeviceCapability The switch WWN of this device.	Bits Enumerated Values: 0 version1	.1.3.6.1.4.1.9.9.371.1.2.2.1.5