CISCO-IPSEC-POLICY-MAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

ikePolMapTable

table
.1.3.6.1.4.1.9.9.172.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ikePolMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IPSEC-POLICY-MAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IPSEC-POLICY-MAP-MIB::ikePolMapTable' 
The IPSec Phase-1 Internet Key Exchange Tunnel
to Policy Mapping Table. There is one entry in
this table for each active IPSec Phase-1
Tunnel.
ikePolMapEntry row .1.3.6.1.4.1.9.9.172.1.1.1.1
Each entry contains the attributes associated
with mapping an active IPSec Phase-1 IKE Tunnel
to it's configured Policy definition.
Indexes
Column Syntax OID
ikePolMapTunIndex
The index of the IPSec Phase-1 Tunnel to Policy
Map Table. The value of the index is the number
used to represent this IPSec Phase-1 Tunnel in
the IPSec MIB (ikeTunIndex in the
ikeTunnelTable).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.172.1.1.1.1.1
ikePolMapPolicyNum
The number of the locally defined ISAKMP policy
used to establish the IPSec IKE Phase-1 Tunnel.
This is the number which was used on the crypto
command. For example, if the configuration command
was:

==>…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.172.1.1.1.1.2

ipSecPolMapTable

table
.1.3.6.1.4.1.9.9.172.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ipSecPolMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IPSEC-POLICY-MAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IPSEC-POLICY-MAP-MIB::ipSecPolMapTable' 
The IPSec Phase-2 Tunnel to Policy Mapping Table.
There is one entry in this table for each active
IPSec Phase-2 Tunnel.
ipSecPolMapEntry row .1.3.6.1.4.1.9.9.172.1.2.1.1
Each entry contains the attributes associated
with mapping an active IPSec Phase-2 Tunnel
to its configured Policy definition.
Indexes
Column Syntax OID
ipSecPolMapTunIndex
The index of the IPSec Phase-2 Tunnel to Policy
Map Table. The value of the index is the number
used to represent this IPSec Phase-2 Tunnel in
the IPSec MIB (ipSecTunIndex in the
ipSecTunnelTable).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.172.1.2.1.1.1
ipSecPolMapCryptoMapName
The value of this object should be the name of
the IPSec Policy (cryptomap) as assigned by the
operator while configuring the policy of
the IPSec traffic.

For instance, on an IOS router, the if the com…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.172.1.2.1.1.2
ipSecPolMapCryptoMapNum
The value of this object should be the priority
of the IPSec Policy (cryptomap) assigned by the
operator while configuring the policy of
this IPSec tunnel.

For instance, on an IOS router, the if the com…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.172.1.2.1.1.3
ipSecPolMapAclString
The value of this object is the number or
the name of the access control string (ACL)
that caused this IPSec tunnel to be established.
The ACL that causes an IPSec tunnel
to be established is referenced by the
cry…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.172.1.2.1.1.4
ipSecPolMapAceString
The value of this object is the access control
entry (ACE) within the ACL that caused this IPSec
tunnel to be established.

For instance, if an ACL defines access for two
traffic streams (FTP and SNMP) …
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.172.1.2.1.1.5