CISCO-IETF-PIM-MIB

        Address family independent MIB module for 
management of PIM routers. 
        
This MIB module is based on RFC 2934 with additional
MIB objects added to make it address family independent
MIB. This Cisco MIB was created due to non availability 
of RFC or an Internet Draft, which can provide address 
family independent MIB for management of PIM routers. 
This MIB may later be deprecated with a stable RFC or an 
Internet Draft.             
    
Source file
CISCO-IETF-PIM-MIB
Last revised
Identity
ciscoIetfPimMIB
Base OID
1.3.6.1.4.1.9.10.119
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-PIM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-PIM-MIB::ciscoIetfPimMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PIM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PIM-MIB::ciscoIetfPimMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (62)
.1.3.6.1.4.1.9.10.119
.1.3.6.1.4.1.9.10.119.0
.1.3.6.1.4.1.9.10.119.1
.1.3.6.1.4.1.9.10.119.1.1
secondsUnsigned32
.1.3.6.1.4.1.9.10.119.1.1.1
.1.3.6.1.4.1.9.10.119.1.1.2
.1.3.6.1.4.1.9.10.119.1.1.2.1
.1.3.6.1.4.1.9.10.119.1.1.2.1.1
Integer32
.1.3.6.1.4.1.9.10.119.1.1.2.1.10
.1.3.6.1.4.1.9.10.119.1.1.2.1.11
.1.3.6.1.4.1.9.10.119.1.1.2.1.2
.1.3.6.1.4.1.9.10.119.1.1.2.1.3
OctetString
.1.3.6.1.4.1.9.10.119.1.1.2.1.4
.1.3.6.1.4.1.9.10.119.1.1.2.1.5
Enumeration
.1.3.6.1.4.1.9.10.119.1.1.2.1.6
OctetString
.1.3.6.1.4.1.9.10.119.1.1.2.1.7
secondsUnsigned32
.1.3.6.1.4.1.9.10.119.1.1.2.1.8
secondsUnsigned32
.1.3.6.1.4.1.9.10.119.1.1.2.1.9
.1.3.6.1.4.1.9.10.119.1.1.3
.1.3.6.1.4.1.9.10.119.1.1.3.1
.1.3.6.1.4.1.9.10.119.1.1.3.1.1
.1.3.6.1.4.1.9.10.119.1.1.3.1.2
OctetString
.1.3.6.1.4.1.9.10.119.1.1.3.1.3
.1.3.6.1.4.1.9.10.119.1.1.3.1.4
.1.3.6.1.4.1.9.10.119.1.1.3.1.5
.1.3.6.1.4.1.9.10.119.1.1.4
.1.3.6.1.4.1.9.10.119.1.1.4.1
.1.3.6.1.4.1.9.10.119.1.1.4.1.1
Unsigned32
.1.3.6.1.4.1.9.10.119.1.1.4.1.2
Unsigned32
.1.3.6.1.4.1.9.10.119.1.1.4.1.3
.1.3.6.1.4.1.9.10.119.1.1.4.1.4
Bits
.1.3.6.1.4.1.9.10.119.1.1.4.1.5
.1.3.6.1.4.1.9.10.119.1.1.5
.1.3.6.1.4.1.9.10.119.1.1.5.1
Enumeration
.1.3.6.1.4.1.9.10.119.1.1.5.1.2
.1.3.6.1.4.1.9.10.119.1.1.6
.1.3.6.1.4.1.9.10.119.1.1.6.1
Unsigned32
.1.3.6.1.4.1.9.10.119.1.1.6.1.1
.1.3.6.1.4.1.9.10.119.1.1.6.1.2
OctetString
.1.3.6.1.4.1.9.10.119.1.1.6.1.3
.1.3.6.1.4.1.9.10.119.1.1.6.1.4
OctetString
.1.3.6.1.4.1.9.10.119.1.1.6.1.5
secondsUnsigned32
.1.3.6.1.4.1.9.10.119.1.1.6.1.6
.1.3.6.1.4.1.9.10.119.1.1.6.1.7
.1.3.6.1.4.1.9.10.119.1.1.7
.1.3.6.1.4.1.9.10.119.1.1.7.1
.1.3.6.1.4.1.9.10.119.1.1.7.1.1
OctetString
.1.3.6.1.4.1.9.10.119.1.1.7.1.2
.1.3.6.1.4.1.9.10.119.1.1.7.1.3
OctetString
.1.3.6.1.4.1.9.10.119.1.1.7.1.4
.1.3.6.1.4.1.9.10.119.1.1.7.1.5
.1.3.6.1.4.1.9.10.119.1.1.8
.1.3.6.1.4.1.9.10.119.1.1.8.1
Unsigned32
.1.3.6.1.4.1.9.10.119.1.1.8.1.1
.1.3.6.1.4.1.9.10.119.1.1.8.1.2
OctetString
.1.3.6.1.4.1.9.10.119.1.1.8.1.3
.1.3.6.1.4.1.9.10.119.1.1.8.1.4
secondsUnsigned32
.1.3.6.1.4.1.9.10.119.1.1.8.1.5
.1.3.6.1.4.1.9.10.119.1.1.8.1.6
.1.3.6.1.4.1.9.10.119.2
.1.3.6.1.4.1.9.10.119.2.1
.1.3.6.1.4.1.9.10.119.2.2
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (6)
A collection of notifications for signaling important PIM
events.
.1.3.6.1.4.1.9.10.119.2.2.1
A collection of objects to support management of PIM Sparse
Mode (version 2) routers.
.1.3.6.1.4.1.9.10.119.2.2.2
A collection of objects to support management of PIM Dense
Mode (version 2) routers.
.1.3.6.1.4.1.9.10.119.2.2.3
A collection of objects to support configuration of which
groups a router is to advertise itself as a Candidate-RP.
.1.3.6.1.4.1.9.10.119.2.2.4
A collection of optional objects to provide per-next hop
information for diagnostic purposes. Supporting this group
may add a large number of instances to a tree walk, but the
information in this group can be extremely useful in
tracking down multicast connectivity problems.
.1.3.6.1.4.1.9.10.119.2.2.5
A collection of optional objects to provide extra
information about the assert election process. There is no
protocol reason to keep such information, but some
implementations may already keep this information and make
it available. These objects can also be very useful in
debugging connectivity or duplicate packet problems,
especially if the assert winner does not support the PIM and
IP Multicast MIBs.
.1.3.6.1.4.1.9.10.119.2.2.6
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.119.2.1.1
The compliance statement for routers running PIM Sparse
Mode and implementing the PIM MIB.
Required groups
mandatory cPimV2MIBGroup
optional cPimV2CRPMIBGroup This group is mandatory if the router is capable of being a
Candidate RP.
Object refinements
ObjectAccessSyntaxDescription
cPimIfStatus readonly
Write access is not required.

OID .1.3.6.1.4.1.9.10.119.2.1.2
The compliance statement for routers running PIM Dense Mode
and implementing the PIM MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
cPimIfStatus readonly
Write access is not required.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.9.10.119.0.2
A cPimNbrLoss trap signifies the loss of an adjacency
with a neighbor. This trap should be generated when the
neighbor timer expires, and the router has no other
neighbors on the same interface with a lower IP address than
itself.